AM26LS30JC

Datasheet AM26LS30 Dual Differential RS-422 Party Line/Quad Single Ended RS-423 Line Driver The AM26LS30 is a line driver designed for digital data transmission. A mode control input provides a choice of operation either as two differential line drivers which meet all the requirements of EIA Standard RS-422 or four independent single-ended RS-423 line drivers. In the differential mode the outputs have individual three-state controls. In the hi-impedance state these outputs will not clamp the line over a common mode transmission line voltage of ±10 V. A typical full duplex system would be the AM26LS30 differential line driver and up to twelve AM26LS32 line receivers or an AM26LS32 line receiver and up to thirty-two AM26LS30 differential drivers. Rochester Electronics Manufactured Components Rochester branded components are manufactured using either die/wafers purchased from the original suppliers or Rochester wafers recreated from the original IP. All re-creations are done with the approval of the Original Component Manufacturer. (OCM) Parts are tested using original factory test programs or Rochester developed test solutions to guarantee product meets or exceeds the OCM data sheet. Quality Overview • ISO-9001 • AS9120 certification • Qualified Manufacturers List (QML) MIL-PRF-35835 • Class Q Military • Class V Space Level • Qualified Suppliers List of Distributors (QSLD) • Rochester is a critical supplier to DLA and meets all industry and DLA standards. Rochester Electronics, LLC is committed to supplying products that satisfy customer expectations for quality and are equal to those originally supplied by industry manufacturers. The original manufacturer’s datasheet accompanying this document reflects the performance and specifications of the Rochester manufactured version of this device. Rochester Electronics guarantees the performance of its semiconductor products to the original OCM specifications. ‘Typical’ values are for reference purposes only. Certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. FOR REFERENCE ONLY © 2020 Rochester Electronics, LLC. All Rights Reserved 07302020 To learn more, please visit www.rocelec.com AMD� RELATED AMO PRODUCTS Description Quad Three-State Single Ended RS-423 Line Driver Quad Differential Line Receiver Quad Differential Line Receiver Pan No. 26LS29 26LS32 26LS33 CONNECTION DIAGRAMS Top View DIP LCC Vee Slew Rate Control A Input A Output A Input/ENABLES Output B Mode