AME4620

AME AME4620 n General Description The AME4620 analog switches feature low ON resistance, single-pole, double-throw (SPDT) with wide operating single power supply voltage range, from 1.8V to 5.5V. AME4620 has 1Ω max ON resistance when +5V power supply is used. These products also have fast switching speeds, tON = t OFF = 50nS max. AME4620 is available in SC-70-6. NC V+ 1-Ohm Low Voltage SPDT Analog Switch n Functional Block Diagram IN NO COM n Features l Low RON In Logic 0 1 GND l Wide Operation Supply Voltage: 1.8V to 5.5V l Fast Switching Time: tON = t OFF = 50nS max. l TTL-Logic Compatible l Pin Compatible with FSA4157 l Over Thermal Protection l Space saving in SC-70-6 l All AME's Lead Free Products Meet RoHS Standards ON OFF OFF ON NC NO n Applications l Power Routing l Battery-Operated Equipment l Audio and Video Signal Routing l l l l Low-Voltage Data-Acquisition Systems Communications Circuits PCMCIA Cards PC Peripherals Rev.B.05 1 AME AME4620 n Pin Configuration SC-70-6 Top view 6 5 4 1-Ohm Low Voltage SPDT Analog Switch AME4620AEIY 1. NO 2. GND AME4620 3. NC 4. COM 5. V+ 1 2 3 6. IN * Die Attach: Conductive Epoxy n Pin Description Pin Name IN V+ GND NC COM NO Digital Control Input Positive Supply Voltage Input Ground Analog Switch-Normally Closed Analog Switch-Common Analog Switch-Normally Open Pin Description 2 Rev.B.05 AME AME4620 n Ordering Information AME4620 xxxxx Special Feature Number of Pins Package Type Operating Ambient Temperature Range Pin Configuration 1-Ohm Low Voltage SPDT Analog Switch Pin Configuration Operating Ambient Temperature Range Package Type Number of Pins Special Feature (SC-70-6) A: 1. NO 2. GND 3. NC 4. COM 5. V+ 6. IN E: -40OC to +85OC I: SC-70 Y: 6 Z: Lead free n Ordering Information Part Number AME4620AEIYZ Marking* BCYw Activity Mode Break-Before-Make Package SC-70-6 Operating Ambient Temperature Range - 40oC to +85oC Note: w represents the date code and pls refer to Date Code Rule before Package Dimension. * A line on top of the first letter represents lead free plating such as BCY. Pls consult AME sales office or authorized Rep./Distributor for the availability of package type. Rev.B.05 3 AME AME4620 n Absolute Maximum Ratings Parameter V+ , IN COM , NC , NO Continuous Current COM , NC , NO ESD Classification 1-Ohm Low Voltage SPDT Analog Switch Maximum 6 Note 1 300 B* Unit V V mA Note1: Signals on COM, NC and NO can not exceed V+ Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device. * HBM B:2000V~3999V n Recommended Operating Conditions Parameter Ambient Temperature Range Junction Temperature Range Storage temperature Range IN V+ Symbol TA TJ TSTG Rating - 40 to +85 - 40 to +125 - 65 to +150 CMOS, TTL Logic 1.8 to 5.5 Unit o C C C o o V V n Thermal Information Parameter Thermal Resistance * (Junction to Case) Thermal Resistance (Junction to Ambient) Internal Power Dissiption Maximum Junstion Temperature Solder Iron ( 10sec )** SC-70-6 Conductive Epoxy Package Die Attach Symbol θJC θJA PD Maximum 224 Unit o C/W 331 300 150 350 mW o C C o * Measure θJ C on center of molding compound if IC has no tab. ** MIL-STD-202G 210F 4 Rev.B.05 AME AME4620 n Electrical Specifications V+ =+5V +/- 10%, GND = 0V, INH = 2.4V, INL = 0.8V, TA = -40oC to +85oC, unless otherwise noted. Typical values are at TA = 25oC. Parameter ANALOG SWITCH On-Resistance On-Resistance Match between channels On-Resistance Match Flatness Switch Off-Leakage Current DIGITAL I/O Input Logic High Input Logic Low Input Current Logic High or Low INH INL IIH , IIL V+ = 5.5V VIN = V+, 0V 2.4 0.8 -1.0 1.0 V µA RON V+ = 4.5V ICOM = 100mA V+ = 4.5V ICOM = 100mA VNO or VNC = 3.5V RFLATE V+ = 4.5V ICOM = 100mA V+ = 5.5V VCOM = 1V, 4.5V TA = 25 oC TA = -40 C to +85 C TA = 25 oC TA = -40 oC to +85oC TA = 25 oC 0.15 o o 1-Ohm Low Voltage SPDT Analog Switch Symbol Test Condition Min Typ Max Units 1.0 1.2 0.12 0.15 0.2 0.2 -0.1 o Ω ∆Ron Ω Ω VNO or VNC = 0V, 1V, 2V TA = -40 oC to +85oC INO(OFF) INC(OFF) TA = 25 oC o 0.05 0.1 1.0 µA VNC or VNO = 4.5V or 1V TA = -40 C to +85 C -1.0 SWITCH DYNAMIC CHARACTERISTICS Turn-On Time t ON Figure 2 TA = 25 oC TA = -40 C to +85 C TA = 25 oC TA = -40 C to +85 C TA = 25 oC TA = -40 C to +85 C o o o o o o 50 60 50 60 1 1 -30 -30 38 138 400 20 ns Turn-Off Time t OFF Figure 2 ns Break-Before-Make Delay Off-Isolation Crosstalk NC or NO Off-Capacitance COM ON-Capacitance -3dB Bandwidth POWER SUPPLY Power Supply Range V Supply Current Rev.B.05 + t BBM OIRR Figure 2 ns RL = 50Ω , CL = 5pF, f = 1MHz, Figure 3 RL = 50Ω , CL = 5pF, f = 1MHz, Figure 4 dB COFF CCOM(ON) BW f = 1MHz, Figure 5 f = 1MHz, Figure 6 RL = 50Ω , Figure 7 pF MHz V+ I + TA = -40 oC to +85oC 1.8 V = 5.5V, IN = 0V or V + + 5.5 10 V µA 5 TA = -40 C to +85 C o o AME AME4620 n Timing Diagrams Figure 1 Switching Time V+ 1-Ohm Low Voltage SPDT Analog Switch NO or NC VIN Logic Input IN COM RL CL VOUT GND H Logic Input L 50% 0.9xVIN VOUT OV t ON tOFF 6 Rev.B.05 AME AME4620 n Timing Diagrams Figure 2 Break-Before-Make Interval 1-Ohm Low Voltage SPDT Analog Switch V+ NC VIN NO Logic Input IN RL CL COM VOUT GND H Logic Input L VOUT tD Rev.B.05 7 AME AME4620 n Test Circuit Figure 3 Off-Isolation / On Channel 1-Ohm Low Voltage SPDT Analog Switch +5V 10nF V+ COM1 50Ω 0V or 2.4v IN NC or No Analyzer 50Ω GND Figure 4 Crosstalk VIN 10nF V+ NC Singal Generator 0dBm Analyzer 50Ω GND NO COM 50Ω IN 8 Rev.B.05 AME AME4620 n Test Circuit Figure 5 NC or NO Capacitance 1-Ohm Low Voltage SPDT Analog Switch +5V 10nF V+ COM IN Capacitance Meter f = 1MHz NC GND 0V or 2.4V Figure 6 COM ON Capacitance +5V 10nF V+ Capacitance Meter f = 1MHz COM IN 0V or 2.4V NC GND Rev.B.05 9 AME AME4620 n Test Circuit Figure 7 Bandwidth 1-Ohm Low Voltage SPDT Analog Switch +5V 10nF V+ NC or NO Rg =50Ω COM VOUT RL 50Ω GND 10 Rev.B.05 AME AME4620 Ron vs. COM Voltage over Supply Voltage 9 8 7 6 1-Ohm Low Voltage SPDT Analog Switch Ron vs. COM Voltage over Temperature 1.25 +1.8V +2.0V VCOM =100mA 1.00 T A=+850 C T A=+105 0C 0.75 R ON( Ω) 5 4 3 2 1 0 1 R O N(Ω ) +2.3V +2.5V T A=+250C T A=-400 C T A=-550 C 0.50 +3.0V +5.0V 2 3 4 5 0.25 V+ = 5V ICOM =100mA 0 1 2 3 4 5 VCOM (V) VCOM (V) OFF Leakage vs. Temperature 0.4 140 120 Charge Injection vs. COM Voltage 0.3 OF F L e a k ag e ( nA ) 100 80 60 40 20 0 0.2 0.1 0.0 -40 -20 0 20 40 60 80 100 q (p C ) 0 1 2 3 4 5 6 Temperature (OC) VCOM (V) Logic Threshold Voltage vs. Supply Voltage 2.5 TURN-ON/OFF Times vs. Supply Voltage 100 Lo gic Th resh old Vo lt ag e (V) 2.0 80 VIN Rising VIN Falling tO N/t OFF (n S) 1.5 60 tON 40 1.0 0.5 20 tOFF 0 2 2.5 3 3.5 4 4.5 5.0 0 2 3 4 5 6 Supply Voltage (V) VSUPPLY (V) Rev.B.05 11 AME AME4620 TURN-ON/OFF Times vs. Temperature 60 1-Ohm Low Voltage SPDT Analog Switch 50 V+ = 5V VNO or VNC = 3V tON t ON/t OF F ( nS ) 40 30 20 10 tOFF 0 -40 -20 0 20 40 60 80 Temperature ( oC ) 12 Rev.B.05 AME AME4620 n Date Code Rule For SC-70 Package Only Marking A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Date Code W W W W W W W W W W Year xxx0 xxx1 xxx2 xxx3 xxx4 xxx5 xxx6 xxx7 xxx8 xxx9 A: B: C: D: E: F: G: H: I: J: w: Work Week Code 01&02 03&04 05&06 07&08 09&10 11&12 13&14 15&16 17&18 19&20 K: L: M: N: O: P: Q: R: S: T: 21&22 23&24 U: V: 41&42 43&44 45&46 47&48 49&50 51&52 1-Ohm Low Voltage SPDT Analog Switch 25&26 W: 27&28 29&30 31&32 33&34 35&36 37&38 39&40 X: Y: Z: n Tape and Reel Dimension SC-70-6 P W AME PIN 1 AME Carrier Tape, Number of Components Per Reel and Reel Size Package SC-70-6 Carrier Width (W) 8.0±0.1 mm Pitch (P) 4.0±0.1 mm Part Per Full Reel 3000pcs Reel Size 180±1 mm Rev.B.05 13 AME AME4620 n Package Dimension SC-70-6 Top View D e1 0. 15(0. 006) C 1-Ohm Low Voltage SPDT Analog Switch Side View SYMBOLS A A MILLIMETERS MIN MAX 1.10 0.10 1.00 0.35 0.25 0.25 0.20 2.20 2.45 1.35 INCHES MIN 0.031 0.000 0.031 0.006 0.006 0.003 0.003 0.075 0.079 0.045 D MAX 0.043 0.004 0.039 0.014 0.010 0.010 0.008 0.087 0.096 0.053 A E1/2 E1 0.15(0.006 ) 0.80 0.00 0.80 0.15 0.15 0.08 0.08 1.90 2.00 1.15 E/2 E A1 A2 b b1 C PIN 1 e .10(0.004 ) M C A B B b c See Detail A c1 D E Front View E1 e e1 SEATING PLANE 0.65BSC 1.30BSC 0.26 0 o 0.0255BSC 0.0512BSC 0.010 0 o A2 A L θ1 θ2 0.46 8 o 0.018 8o 10o .10(0. 004) C A1 C 4o 10 o 4o Detail A θ1 SECTION AA (b) b1 c1 c .15(. 0059) H GAGE PLANE BASE METAL θ L 14 Rev.B.05 www.ame.com.tw E-Mail: sales@ame.com.tw Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. © AME, Inc. , November 2008 Document: 2105-DS4620-B.05 Corporate Headquarter AME, Inc. 2F, 302 Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan . Tel: 886 2 2627-8687 Fax: 886 2 2659-2989