ATHP042P25EL

35.0 26.0 A1 - FIRST RELEASE DATE BY APPR May.22,17 Regan Tommy A2 - A3 - MODIFY THE CURRENT RATING Jul.10,17 White Tommy ADD BLACK SPECIFICATION Jan-10-20 Blink Tommy 14.0±0.1 26.0 A Key ATHP042P25ELB-BLK B Key ATHP042P25ELC ATHP042P25ELC-BLK C Key ATHP042P25ELD ATHP042P25ELD-BLK D Key 1 ATHP042P25EL-BLK ATHP042P25ELB SH: ATHP042P25EL A3 25.5 Key type The black shell REV: 38.5 ATHP042P25EL*-xx PART NUMBER The orange shell DWG NO: B Key ATHP,RECEPTACLE,2 PIN,HVIL WITH EMC SHIELDING 47.5 38.5 A Key DESCRIPTION TITLE: 40.6 4-Ø 4.3 ECO NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: 1.1 HOUSING: THERMOPLASTIC UL 94V0 1.2 SEAL: SILICONE RUBBER 1.3 POWER CONTACT: COPPER ALLOY,Tin PLATED 1.4 SHIELDING: COPPER ALLOY, NICKLE PLATED 2. SPECIFICATIONS: 2.1 CURRENT RATING: 6.0mm2（MP1 0B23XX）@35 AMPS 4.0mm²（SP1 2A1 XX-1 0）@25 AMPS 2.5mm²（SP12A1XX）@20 AMPS "XX" DENOTES DIFFERENT PLATING. 2.2 VOLTAGE RATING: 1000 V AC/DC 2.3 OPERATING TEMPERATURE: -40°C TO +130°C 2.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 3000 VOLTS AC. 2.5 INSULATION RESISTANCE: 500 MEGOHMS MIN@25°C. 2.6 DEGREE OF PROTECTION: IP67 (MATED CONDITION) 2.7 MATING CYCLE DURABILITY: 100 CYCLES 2.8 RoHS COMPLIANT 3. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 29.4 44.0REF. 14.6 200±5 REVISIONS REV OF: R7.0 Ø 4. 3 UNLESS OTHERWISE SPECIFIED 4- 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: Amphenol DATE Jan.10.20 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: RECOMMEND PANEL CUT TOLERANCE: ±0.05 Blink MATERIAL SPECIFICATIONS: Tommy Jan.10.20 ATHP, RECEPTACLE,2 PIN, HVIL WITH EMC SHIELDING CUSTOMER: C Key D Key PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATHP042P25EL*-xx A3 SHEET 1 OF 1 1 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY MagnaMate™ ATHP Mini - Contact Options Crimp Contacts, Machined Part Number Male Female Stamped & Formed, Crimp Contacts (14-12AWG) AWG Wire Range (mm²) Use with Endcap Plating MP10B23T MS10B23T 12-10 3.0-6.0 Yes Tin MP10B23S MS10B23S 12-10 3.0-6.0 Yes Silver Part Number Male Female SP12A1T SS12A1T Size Wire Range (mm²) Plating 2.5mm 2.5-3.5 Tin Stamped & Formed, Crimp Contacts (4mm²) MP10B23F MS10B23F 12-10 3.0-6.0 Yes Gold Flash MP10B23G5 MS10B23G5 12-10 3.0-6.0 Yes Gold 5µ” MP10B23G10 MS10B23G10 12-10 3.0-6.0 Yes Gold 10µ” Male Female MP10B23G15 MS10B23G15 12-10 3.0-6.0 Yes Gold 15µ” SP12A1T-10 SS12A1T-10 MS10B23G30 MS10B23G30 12-10 3.0-6.0 Yes Gold 30µ” Part Number Size Wire Range (mm²) Plating 4.0mm 4mm² Tin Tooling, Stamped & Formed Tooling, Machined Part Number Description MFX-3962 QXRT08 Contact Extraction Tool, #8 (Ø 3.6) Contact M300BT Hand Crimper WA27-300BT-EP TP968 Part Number Description Hand Tool, Stamped & Formed Contact, 2.5mm Contact Pneumatic Crimper Locator M3200BT and WA27-300BT-EP for Pneumatic Crimper Plating Options, All Symbol Plating T Tin Plated (for Stamped & Formed Contacts) S Silver Plated 5Um (for Machined Contacts) F Gold Plated G5 Gold Plated (Thickness 5µ”) G10 Gold Plated (Thickness 10µ”) G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 04/2022