ATM15-3P-BM01

REVISIONS REV ECO A1 - 41.0 2x Ø3.10 x 10.2 DP DATE RELEASE NEW DRAWING BY 15JUN18 APPR SULLEN TOMMY 4x Ø2.79 x 13.25 DP 30.2 30.0 17.3 20.9 RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE: 6-10 IN-LB [0.68-1.13 NM] TITLE: RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 10-20 IN-LB [1.13-2.25 NM] DESCRIPTION 16.2 PCB MOUNT RECEPTACLE 3PIN, STRAIGHT FLANGE, ATM SERIES 27.0 15.8 4x R7.6 FLANGE SEAL PIN #1 3.05±0.4 RESERVOIR 4.2 8.4 22.2 41.02 MIN. 29.99±0.10 22.22±0.1 21.80 4.10 6x R0.80 NOTES: UNLESS OTHERWISE SPECIFIED 17.15 26.95 MIN. Ø1.20+0.2 (3x) 0 4.20±0.05 INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 8.40±0.10 2x R4.00 0.13 RECOMMENDED PCB LAYOUT RECOMMENDED PANEL CUTOUT A1 VIEW FROM COMPONENTS SIDE OF PCB SH: 1 OF: ATM15-3P-BMXX ATM15-3P-BMXX VARIANTS DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED CONTACT POTTING OR NOT PLATING IN RESERVOIR GOLD NO POTTING PART NUMBER ATM15-3P-BM01 GOLD POTTING ATM15-3P-BM02 TIN NO POTTING ATM15-3P-BM03 TIN POTTING ATM15-3P-BM04 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: Amphenol DATE SULLEN.ZHANG 15JUN18 ORION.LI 15JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: TOMMY.XIE 15JUN18 CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. PCB MOUNT RECEPTACLE 3PIN, STRAIGHT FLANGE, ATM SERIES TYPE B C- 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATM15-3P-BMXX SHEET 1 A1 OF 1 1 4. MATING PART: ATM06-3S* (* = ALL MODIFICATIONS) 13.00 8.58 Ø3.43 (4x) 2. MODIFICATIONS: FLANGE; STRAIGHT PCB MOUNT 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 15.75±0.1 REV: 1. MATERIAL: HOUSING: THERMOPLASTIC, GREY SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY 13.00 ATM15-3P-BMXX 3x Ø1.0±0.12 6.91±0.1 4x R7.60 MIN. 2x Ø4.06 DWG NO: 18.20