BLP05H6250XR;
BLP05H6250XRG
Power LDMOS transistor
Rev. 4 — 21 September 2016
Product data sheet
1. Product profile
1.1 General description
A 250 W extremely rugged LDMOS power transistor for broadcast and industrial
applications in the HF to 600 MHz band.
Table 1.
Application information
VDS
PL
Gp
D
Test signal
f
(MHz)
(V)
(W)
(dB)
(%)
pulsed RF
108
50
250
27
75
1.2 Features and benefits
Easy power control
Integrated dual sided ESD protection enables class C operation and complete
switch off of the transistor
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (HF to 600 MHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
Industrial, scientific and medical applications
Broadcast transmitter applications
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
Graphic symbol
BLP05H6250XR (SOT1223-2)
1
gate 2
2
gate 1
3
drain 1
4
drain 2
5
4
4
3
1
pin 1 index
5
2
[1]
source
1
2
3
aaa-003574
BLP05H6250XRG (SOT1224-2)
1
gate 2
2
gate 1
3
drain 1
4
drain 2
5
4
3
4
1
pin 1 index
[1]
source
5
2
1
2
3
aaa-003574
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
BLP05H6250XR
Description
Version
HSOP4F plastic, heatsink small outline package; 4 leads (flat)
BLP05H6250XRG HSOP4F plastic, heatsink small outline package; 4 leads
SOT1223-2
SOT1224-2
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Max
Unit
VDS
drain-source voltage
-
135
V
gate-source voltage
6
+11
V
Tstg
storage temperature
65
+150
C
-
225
C
[1]
Product data sheet
Min
VGS
Tj
BLP05H6250XR_H6250XRG
Conditions
junction temperature
[1]
Continuous use at maximum temperature will affect the reliability, for details refer to the online MTF
calculator.
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
2 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Conditions
Tj = 115 C
[1][2]
Rth(j-c)
thermal resistance from junction to case
Zth(j-c)
transient thermal impedance from junction Tj = 150 C; tp = 100 s;
to case
= 20 %
[1]
[3]
Typ
Unit
0.31
K/W
0.101 K/W
Tj is the junction temperature.
[2]
Rth(j-c) is measured under RF conditions.
[3]
See Figure 1.
aaa-020219
0.4
Zth(j-c)
(K/W)
(7)
(6)
(5)
(4)
(3)
(2)
(1)
0.3
0.2
0.1
0
10-7
10-6
10-5
10-4
10-3
10-2
10-1
tp (s)
1
(1) = 1 %
(2) = 2 %
(3) = 5 %
(4) = 10 %
(5) = 20 %
(6) = 50 %
(7) = 100 % (DC)
Fig 1.
Transient thermal impedance from junction to case as a function of pulse
duration
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C; per section unless otherwise specified.
BLP05H6250XR_H6250XRG
Product data sheet
Symbol Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS drain-source breakdown
voltage
VGS = 0 V; ID = 1.0 mA
135
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 100 mA
1.33
1.9
2.33
V
VGSq
gate-source quiescent voltage
VDS = 50 V; ID = 50 mA
-
1.8
-
V
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
3 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
Table 6.
DC characteristics …continued
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
IDSS
drain leakage current
VGS = 0 V; VDS = 50 V
-
-
1.4
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
-
14.6
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
140
nA
RDS(on)
drain-source on-state
resistance
VGS = VGS(th) + 3.75 V;
ID = 3.5 A
-
0.40
-
Table 7.
AC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ
Max Unit
Crs
feedback capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
0.9
-
pF
Ciss
input capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
120
-
pF
Coss
output capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
39
-
pF
Table 8.
RF characteristics
Test signal: pulsed RF; tp = 100 s; = 20 %; f = 108 MHz; RF performance at VDS = 50 V;
IDq = 100 mA; Tcase = 25 C; unless otherwise specified; in a class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL = 250 W
26.2
27
-
dB
RLin
input return loss
PL = 250 W
-
12
10
dB
D
drain efficiency
PL = 250 W
72
75
-
%
aaa-020220
300
Coss
(pF)
250
200
150
100
50
0
0
10
20
30
40
50
VDS (V)
60
VGS = 0 V; f = 1 MHz.
Fig 2.
BLP05H6250XR_H6250XRG
Product data sheet
Output capacitance as a function of drain-source voltage; typical values per
section
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
4 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
7. Test information
7.1 Ruggedness in class-AB operation
The BLP05H6250XR and BLP05H6250XRG are capable of withstanding a load mismatch
corresponding to VSWR > 65 : 1 through all phases under the following conditions:
VDS = 50 V; IDq = 100 mA; PL = 250 W pulsed; f = 108 MHz.
7.2 Impedance information
drain 1
gate 1
Zi
ZL
gate 2
drain 2
001aan207
Fig 3.
Definition of transistor impedance
Table 9.
Typical push-pull impedance
Simulated Zi and ZL device impedance; impedance info at VDS = 50 V and PL = 250 W.
f
Zi
ZL
(MHz)
()
()
108
15.9 49.8j
15.3 + 3.5j
7.3 UIS avalanche energy
Table 10. Typical avalanche data per section
Tamb = 25 C; typical test data; test jig without water cooling.
IAS
EAS
(A)
(J)
8
1.4
9
1.0
10
0.8
For information see application note AN10273.
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
5 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
7.4 Test circuit
200 mm
L3
R5
C19
L1
T2
C10
C5
C7
C12
R3
R1
80 mm
C2
C1
C14
C4
C17
C16
C15
C3
C21
C18
R2
C8
C6
R4
C13
C11
T1
L2
C20
R6
L4
aaa-020545
45.1 mm
Printed-Circuit Board (PCB): Taconic RF-35; r = 3.5 F/m; thickness = 0.765 mm; thickness copper plating = 35 m.
See Table 11 for a list of components.
Fig 4.
Component layout for class-AB production test circuit
Table 11. List of components
For test circuit see Figure 4.
Component
Description
Value
Remarks
C1
multilayer ceramic chip capacitor 510 pF
[1]
C2, C3
multilayer ceramic chip capacitor 220 pF
[1]
C4
multilayer ceramic chip capacitor 91 pF
[1]
C5, C6
multilayer ceramic chip capacitor 4.7 F, 50 V
C7, C8
multilayer ceramic chip capacitor 820 pF
[1]
C10, C11
multilayer ceramic chip capacitor 820 pF
[1]
C12, C13
multilayer ceramic chip capacitor 4.7 F, 100 V
C14, C15
multilayer ceramic chip capacitor 43 pF
[1]
C16
multilayer ceramic chip capacitor 6.8 pF
[1]
C17, C18
multilayer ceramic chip capacitor 120 pF
[1]
C19, C20
electrolytic capacitor
C21
multilayer ceramic chip capacitor 62 pF
L1, L2
wire inductor
10 turns, D = 2 mm, 0.5 mm copper wire
L3, L4
wire inductor
6 turns, D = 2 mm, 0.5 mm copper wire
R1, R2
resistor
4.7 k
SMD 1206
R3, R4
shunt resistor
0.01
FC4L110R010FER
R5, R6
metal film resistor
10 , 0.6 W
T1, T2
semi rigid coax
50 , length = 160 mm
[1]
2200 F, 64 V
[1]
EZ-141-AL-TP-M17
American Technical Ceramics type 100B or capacitor of same quality.
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
6 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
7.5 Graphical data
The following figures are measured in a class-AB production test circuit.
7.5.1 1-Tone CW pulsed
aaa-020221
30
Gp
(dB)
90
ηD
(%)
ηD
28
aaa-020546
58
PL
(dBm)
57
Ideal PL
70
(2)
56
26
55
50
(1)
Gp
PL
54
24
30
53
22
0
80
160
240
320
PL (W)
52
10
400
24
VDS = 50 V; IDq = 100 mA; f = 108 MHz; tp = 100 s;
= 20 %.
25
26
27
28
29
30
Pi (dBm)
VDS = 50 V; IDq = 100 mA; f = 108 MHz; tp = 100 s;
= 20 %.
(1) PL(1dB) = 54.2 dBm (265 W)
(2) PL(3dB) = 54.8 dBm (300 W)
Fig 5.
Power gain and drain efficiency as function of
output power; typical values
BLP05H6250XR_H6250XRG
Product data sheet
Fig 6.
Output power as a function of input power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
7 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
aaa-020222
32
Gp
(dB)
aaa-020223
90
ηD
(%)
30
(1)
(2)
(3)
(4)
(5)
(6)
(7)
70
28
50
26
(7)
(6)
(5)
(4)
(3)
(2)
(1)
24
30
22
10
0
50
100
150
200
250
300
PL (W)
350
0
VDS = 50 V; f = 108 MHz; tp = 100 s; = 20 %.
50
100
(1) IDq = 20 mA
(2) IDq = 100 mA
(2) IDq = 100 mA
(3) IDq = 200 mA
(3) IDq = 200 mA
(4) IDq = 400 mA
(4) IDq = 400 mA
(5) IDq = 600 mA
(5) IDq = 600 mA
(6) IDq = 800 mA
(6) IDq = 800 mA
(7) IDq = 1000 mA
Product data sheet
250
300
PL (W)
350
(7) IDq = 1000 mA
Power gain as a function of output power;
typical values
BLP05H6250XR_H6250XRG
200
VDS = 50 V; f = 108 MHz; tp = 100 s; = 20 %.
(1) IDq = 20 mA
Fig 7.
150
Fig 8.
Drain efficiency as a function of output power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
8 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
aaa-020224
30
Gp
(dB)
aaa-020225
90
ηD
(%)
(7) (6)
(5)
(4)
(3)
150
200
(2)
(1)
28
70
26
(2)
50
(1)
(3)
24
(4)
(5)
30
(6)
22
(7)
20
10
0
50
100
150
200
250
300
PL (W)
350
IDq = 100 mA; f = 108 MHz; tp = 100 s; = 20 %.
0
50
(1) VDS = 50 V
(2) VDS = 45 V
(2) VDS = 45 V
(3) VDS = 40 V
(3) VDS = 40 V
(4) VDS = 35 V
(4) VDS = 35 V
(5) VDS = 30 V
(5) VDS = 30 V
(6) VDS = 25 V
(6) VDS = 25 V
(7) VDS = 20 V
Product data sheet
350
(7) VDS = 20 V
Power gain as a function of output power;
typical values
BLP05H6250XR_H6250XRG
250
300
PL (W)
IDq = 100 mA; f = 108 MHz; tp = 100 s; = 20 %.
(1) VDS = 50 V
Fig 9.
100
Fig 10. Drain efficiency as a function of output power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
9 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
8. Package outline
HSOP4F: plastic, heatsink small outline package; 4 leads(flat)
SOT1223-2
D
E
X
c
B
D3
A
E3
y
v
HE
A
D1
D2
b
w
4
B
3
(8x) METAL
PROTRUSIONS (SOURCE)
e4
(2x)
F (4x)
e3
(2x)
E2
E1
A
A2
A1
pin 1 index
Q1
detail X
1
2
e1 (2x)
e2 (2x)
e
Q1
0
10 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
max
nom
min
A
A1
3.9
0.2
0.1
0
A2
b
c
D(1)
D1
D2
D3
E(1)
E1
E2
E3
e
e1
e2
e3
e4
3.65 3.90 0.27 20.62 19.00 16.05 20.44 10.01 8.18 5.89 9.83
3.60 3.85 0.22 20.57 18.95 16.00 20.39 9.96 8.13 5.84 9.78 8.85 8.45 9.55 2.97 4.07
3.55 3.80 0.17 20.52 18.90 15.95 20.34 9.91 8.08 5.79 9.73
Note
1. Package body dimensions “D and “E do not include mold and metal protrusions. Allowable protrusion is 0.25 mm per side.
2. Lead width dimension “b does not include dambar protrusions. Allowable dambar protrusion is 0.25 mm in total per lead.
Outline
version
v
References
IEC
JEDEC
JEITA
w
1.62
1.57 0.25 0.25
1.52
European
projection
F
y
0.1
HE
16.16
0.4 15.96
15.76
sot1223-2_po
Issue date
15-01-12
15-06-04
SOT1223-2
Fig 11. Package outline SOT1223-2 (HSOP4F)
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
10 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
HSOP4: plastic, heatsink small outline package; 4 leads
SOT1224-2
D
X
E
c
D3
B
E3
y
A
v
HE
A
D1
D2
b
w
4
e4
(2x)
3
B
(8x) METAL
PROTRUSIONS (SOURCE)
e3
Q
(2x)
E2
E1
A2
A
(A3)
A1 A4
pin 1 index
Lp
1
2
θ
H
detail X
e1 (2x)
e2 (2x)
e
HE
0
Lp
Q
v
w
13.5 1.10 2.07
13.2 0.95 2.02 0.25 0.25
12.9 0.80 1.97
10 mm
scale
y
θ
0.1
7°
3°
0°
Dimensions (mm are the original dimensions)
Unit
mm
max
nom
min
A
A1
3.9
0.2
0.1
0
A2
A3
A4
b
D(1)
c
D1
D2
D3
E(1)
E1
E2
E3
e
e1
e2
e4
3.65
0.06 3.90 0.27 20.62 19.00 16.05 20.44 10.01 8.18 5.89 9.83
0
3.60 0.35
3.85 0.22 20.57 18.95 16.00 20.39 9.96 8.13 5.84 9.78 8.85 8.45 9.55 2.97 4.07
-0.02 3.80 0.17 20.52 18.90 15.95 20.34 9.91 8.08 5.79 9.73
3.55
Note
1. Package body dimensions “D and “E do not include mold and metal protrusions. Allowable protrusion is 0.25 mm per side.
2. Lead width dimension “b does not include dambar protrusions. Allowable dambar protrusion is 0.25 mm in total per lead.
3. Dimension A4 is measured with respect to bottom of the heatsink DATUM H. Positive value means that the bottom of the heatsink
is higher than the bottom of the lead.
Outline
version
e3
References
IEC
JEDEC
JEITA
European
projection
sot1224-2_po
Issue date
15-01-13
15-06-04
SOT1224-2
Fig 12. Package outline SOT1224-2 (HSOP4F)
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
11 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 12.
Abbreviations
Acronym
Description
CW
Continuous Wave
ESD
ElectroStatic Discharge
HF
High Frequency
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
MTF
Median Time to Failure
SMD
Surface Mounted Device
UIS
Unclamped Inductive Switching
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 13.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLP05H6250XR_H6250XRG v.4
20160921
Product data sheet
-
BLP05H6250XR v.3
Modifications:
•
The document now describes both the straight lead and gull-wing versions of
this product: BLP05H6250XR and BLP05H6250XRG respectively
•
•
•
•
Table 2 on page 2: added BLP05H6250XRG data
Table 3 on page 2: added BLP05H6250XRG data
Section 7.1 on page 5: added BLP05H6250XRG
Figure 12 on page 11: added figure SOT1224-2
BLP05H6250XR v.3
20160203
Product data sheet
-
BLP05H6200XR#2
BLP05H6200XR#2
20150901
Objective data sheet
-
BLP05H6200XR v.1
BLP05H6200XR v.1
20150518
Objective data sheet
-
-
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
12 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLP05H6250XR_H6250XRG
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
13 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
13. Contact information
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
BLP05H6250XR_H6250XRG
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 21 September 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
14 of 15
BLP05H6250XR; BLP05H6250XRG
Power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
7.5
7.5.1
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5
Ruggedness in class-AB operation . . . . . . . . . 5
Impedance information . . . . . . . . . . . . . . . . . . . 5
UIS avalanche energy . . . . . . . . . . . . . . . . . . . 5
Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 7
1-Tone CW pulsed . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Handling information. . . . . . . . . . . . . . . . . . . . 12
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon Netherlands B.V. 2016.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 21 September 2016
Document identifier: BLP05H6250XR_H6250XRG