GE-2157

4 PROPRIETARY NOTICE: THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO AMPHENOL AND SHALL NOT BE DISCLOSED IN WHOLE OR IN PART IN ANY FORM OR FOR ANY REASON EXCEPT AS EXPRESSLY STATED IN WRITING BY AMPHENOL. 2 3 DWG NO. GE-2157 TEMP ( $ C) -40 NOTES: 25 1. CONTINOUS OPERATING TEMPERATURE -40 °C TO 150 °C D 50 2. CONNECTOR: METRI-PACK 150.2 OR GT150 3.5mm MATING APTIV(DEPLHI) NUMBER:12162193,15336004, OR EQUIVILANT 85 125 3. VOLTAGE: 5V 128 4. SENSOR INSTALATION TORQUE: TIGHTEN PROBES TO 20Nm TO 25Nm REFERENCE 150 5. LOCTITE 503,516 OR 517 THREAD SEALANT APPLIED TO THE THREADS RESISTANCE (OHMS) SH 1 RES TOL ( # %) 4.87 980.3 2.27 C 88.3 2.75 2795 283.5 81.7 47.5 REVISIONS REV A 100865 1 REV D 2.50 2.00 REVISION HISTORY DATE INITIAL RELEASE DWN APVD 06/01/18 MED JD MED JD MED JD 85° C WAS 80 ° C ADDED 128 ° C ROW 11/01/18 ADDED NOTES #4 & #5 B ADDED NOTE#5 THEAD SEALENT NOTE#6 WAS #5 UPDATED NOTES,ULTEM 2300-BLACK WAS NYLON 66 GF 33% 27.0+/-.5WAS 27.00,8.3+/-.15 WAS 8.30 D 11/29/18 5/30/19 MED STS 2.77 D 2.90 19 HEX TERMINAL-TIN PLATED C SCALE C 1:1 CONNECTOR: ULTEM 2300-BLACK HOUSING: BRASS CDA 345 B (28.95 ) 56 TYPICAL 25 °C CIRCUIT B 1 SEALING WASHER COPPER Amphenol Advanced Sensors M12 x 1.5 27.0 TITLE 0.5 FLUID TEMPERATURE SENSOR (17 ) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MM TOLERANCES ARE: .X .XX A St. Marys, PA 15857 # # 0.5 0.25 APPROVALS DRAWN ANGLES # 2 $ CHECKED DO NOT SCALE DRAWING 8.30 0.15 THIRD ANGLE PROJECTION SIZE B SCALE LEGAL NOTICE - THIS DRAWING AND ANY INTELLECTUAL PROPERTY RIGHTS THERE IN ARE PROPERTY OF AMPHENOL AND NO LICENSES ARE GRANTED UNDER THOSE RIGHTS. 4 3 2 2:1 SEE DRAWING DWG NO. DAM/MED 06/01/18 STS 06/01/2018 JD 06/01/2018 ENGR INTERPRET DRAWING IAW ASME Y14.5 MATERIAL DATE QC MFG GE-2157 1 REV SHEET 1 OF 1 D A