MS3102A20-14S-RES

MS/Standard how to order MIL-DTL-5015 and MIL-5015 Type (Solder Contacts) MS 1 3102 2 A 3 18 – 3 4 5 P 6 W 7 Proprietary (Crimp Contacts) 75 – 1 (SR) 8 1. Connector Type MS designates Military Standard CS* designates service class A and C with proprietary special contact arrangements SG* designates service class E with proprietary special contact arrangements SM* designates service class F and R with proprietary special contact arrangements 2. Connector Style 3100 wall mounting receptacle 3101 cable connecting plug 3102 box mounting receptacle 3106 straight plug 3108 90° plug 3. Service Class A solid shell for general, non-environmental applications C solid shell for pressurized applications E environmental resisting F environmental resisting with strain relief (MS part number only) R lightweight environmental resisting 4., 5. Shell size and insert arrangement - see tables, pages 22–24. 6. Contact Types P designates pin contact S designates socket contact 7. Insert Rotation “W”, “X”, “Y”, or “Z” designate that insert is rotated in its shell from normal position. No letter required for normal (no rotation) position. 8. (SR) strain relief for non-military connectors (For MS use “F” class) 1. 2. 3. 4. 68 2 0 3 12 – 3 4 5 Connector Type 75 – connector utilizing silver plated contacts 80 – less contacts 85 – contacts utilizing 50 micro-inches gold over silver plating Service Class 68 service class A, general duty 474 service class F, environmental resisting 190 service class R, lightweight environmental resisting Connector Style 0 wall mounting receptacle 1 cable connecting plug 2 box mounting receptacle 6 straight plug 8 90° plug Shell Size Designator Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 Shell Designator 8 10 11 14 15 16 17 20 22 24 28 32 36 40 44 48 20 22 24 28 32 36 40 44 48 18 18 Insert Arrangements See page 22-24. Contact Type/Alternate Insert Rotation P designates pin, S designates socket for normal positioning of inserts. When an alternate position of the connector insert is required to prevent cross-mating, a different letter (other than P or S) is used. See page 25 for description of alternate positions, then convert to Amphenol® proprietary coding by the following charts: Pin Contacts 70 13 Shell Designator 6. Consult Amphenol, Sidney, NY for availability of alternate finishes, including black and olive drab zinc alloys. 12 Shell Size 5. * For insert arrangements over 50 and shell size 40 and above. Exceptions: 36-52, 40-1, 40-9 and 40-56 are MS approved. H 6 Socket Contacts MS Letter Amphenol Letter MS Letter Amphenol Letter PW G SW H PX I SX J PY K SY L PZ M SZ N Amphenol ® MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors DESIGN CHARACTERISTICS • Medium to heavy weight cylindrical • Durable, field-proven design • Environmental resistant • Resilient inserts • Operating voltage to 3000 VAC (RMS) at sea level • Threaded couplings • Single key/keyway shell polarization • Cost effective CUSTOMER OPTIONS Five shell styles Nineteen shell sizes 305 contact arrangements from 1 to 104 circuits Solder or crimp contacts, sizes 16-0 accepting 22-0 AWG. • Coaxial and thermocouple contact options • Five class designations • Alternate insert positioning • Hermetic configurations available • Zinc alloy plating (cadmium-free) available • • • • MS-A, MS-C MS connectors meet the latest performance requirements of MIL-DTL-5015. These connectors represent well-proven electrical capability at an acceptable cost for most equipment where durability is important. MIL-DTL-5015 features threaded couplings and single key/keyway polarization, representing maximum simplicity in design. Applications include military ground support equipment, ordnance and shipboard installations. MS-E/F Amphenol Industrial Operations manufactures five classes of connectors to meet different requirements. Class designations and brief descriptions are listed below. A – Solid Shell – for general, non-environmental applications. C – Pressurized – for use on pressurized bulkheads or pressure barriers; limits air leakage regardless of type and class of plug mated with them. E/F –Environmental Resisting with Strain Relief – designed for applications where the connector will be exposed to moisture, vibration, and rapid changes in pressure and temperature. MS-R R – Lightweight Environmental Resisting – shorter in length and lighter in weight than the E and F classes, the MS-R offers a high degree of reliability under adverse conditions: recommended for new design applications. 3 MS/Standard MS-A and MS-C MS-A and MS-C MS-A and MS-C class connectors perform many of the vital functions in powering, testing and ground support systems. Class A applications include communications equipment, computers and shipboard installations where mechanical forces and physical parameters are not subject to extreme or rapid environmental changes. Class C connectors are most frequently used on pressurized bulkheads or pressure barriers at elevated altitudes or maritime applications. Air leakage is limited to one cubic inch per hour at a pressure differential of 30 lbs. per square inch. wall mounting receptacle Shells: Shell components are fabricated from high grade aluminum alloy. Electrically conductive cadmium plate finish with an olive drab chromate after-treat offers corrosion resistance. cable connecting plug Contacts: Contacts are available in both solder and crimp versions. Pins and sockets are machined from copper alloy with a silver plated finish. Size 16 and 12 socket contacts incorporate a closed entry design. Refer to pages 49, 67 and 68 for additional contact information. Inserts: Inserts are resilient neoprene, offering high dielectric strength, high arc resistance and resistance to vibration. Proprietary design permits pressurization of either pin or socket insert. box mounting receptacle straight plug 90 degree plug 4 MS/Standard MS3100A or C wall mounting receptacle S L R V Thread A Thread S R B T 4 Holes M Z K To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min Full Thread K +.020 –.010 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** 48*** .5000-28UNEF .6250-24 UNF .6250-24 UNF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN 3.0000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 1.031† 1.031† L ±.030 M +.010 –.000 R ±.005 1.391 1.468 1.468 1.468 1.843 1.468 1.843 1.468 1.843 1.938 1.844 1.938 1.969 2.188 2.157 2.219 2.188 2.547 2.547 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .875 .875 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.063 1.156 1.250 1.375 1.562 1.750 1.938 2.188 2.375 2.625 * Increase Z dimension by .312 for size “0” contact only. ** Increase Z dimension by .062 for size “0” contact only. *** Available in proprietary version only. † +.020 –.030 †† ±.020 5 S ±.031 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 3.000†† 3.000†† T Dia. +.004 –.002 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .173 .173 V Thread Class 2A .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 3.0000-16UN Z +.050 –.060 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* .751** .751** MS/Standard MS3101A cable connecting plug L B N V Thread A Thread Z To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min. Full Thread L ±.030 N Dia. Max. V Thread Class 2A Z ±.040 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN .406 .406 .406 .422 .656 .391 .625 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 1.390 1.468 1.468 1.468 1.843 1.468 1.843 1.468 1.843 1.938 1.844 1.938 1.969 2.188 2.157 2.219 2.188 2.521 .532 .628 .755 .755 .755 .882 .882 1.010 1.010 1.137 1.264 1.392 1.519 1.774 1.996 2.251 2.506 3.135 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 1.094 1.094 1.094 1.094 1.532 1.094 1.532 1.094 1.532 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.782** * Increase Z dimension by .312 for size “0” contact only. ** Increase Z dimension by .062 for size “0” contact only. *** Available in proprietary version only. 6 MS/Standard MS3102A or C box mounting receptacle S R B A Thread S N R T 4 Holes L M Z K To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min Full Thread K +.020 –.010 L +.000 –.010 M +.010 –.000 N Dia. +.010 –.000 R ±.005 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** 48*** .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN 3.0000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 1.063 1.063 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 .543† .543† .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .875 .875 .375 .500 .625 .625 .625 .750 .750 .875 .875 1.000 1.125 1.250 1.375 1.625 1.875 2.062 2.312 2.594 2.812 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.062 1.156 1.250 1.375 1.562 1.750 1.938 2.188 2.375 2.625 * Increase Z dimension by .312 for size “0” contact only. ** Increase Z dimension by .062 for size “0” contact only. *** Available in proprietary version only. † +.020 –.030 †† ±.020 7 S ±.031 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 3.000†† 3.250†† T Dia. +.004 –.002 Z +.050 –.060 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .173 .209 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578 .578* .500* .500* .500* .768** .769** MS/Standard MS3106A straight plug L J Z Q V Thread A Thread To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** 48*** A Thread Class 2B .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN 3.3000-16UN J ±.005 L ±.030 Q Dia. Max. V Thread Class 2A Z ±.045 .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .859 .937 .937 .937 1.124 .937 1.124 .937 1.124 1.219 1.125 1.219 1.251 1.470 1.439 1.500 1.469 1.818† 1.818† .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 3.084 3.354 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 3.0000-16UN .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* 1.063** 1.063** * Increase Z dimension by .312 for size “0” contact only. ** Increase Z dimension by .062 for size “0” contact only. *** Available in proprietary version only. † +.020 –.030 8 MS/Standard MS3108A 90 degree plug L Z J Q A Thread U W V Thread To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size A Thread Class 2B J ±.005 L Max. Q Dia. Max. U Max. V Thread Class 2A W Z ±.045 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .896 .927 .951 .956 1.143 1.120 1.207 1.146 1.332 1.395 1.645 1.645 1.896 1.896 2.118 2.176 2.301 .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 .750 .750 .875 .875 .875 1.000 1.000 1.062 1.062 1.188 1.250 1.312 1.438 1.500 1.750 1.875 2.031 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .438 .500 .500 .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* * Increase Z dimension by .312 for size “0” contact only. 9 MS/Standard MS-E/F MS-E & F MS Class F connectors satisfy all the performance requirements of MIL-DTL-5015. Class E, environmental is also produced, but is no longer listed on the qualified products listing (QPL). These connectors are recommended for conditions where vibration, moisture, pressure and/or temperature are extreme. Strain relief is supplied on most shell sizes. Shells: wall mounting receptacle Shell components are fabricated from high grade aluminum alloy. The standard hardware plating is electrically conductive cadmium plated finish with an olive drab chromate after-treatment for corrosion resistance. Consult Amphenol, Sidney, NY for other plating options. Contacts: Contacts are silver plated copper alloy for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Size 16 and 12 socket contacts incorporate a closed entry design. Crimp and solder versions are available. Refer to pages 49, 67 and 68 for additional contact information. cable connecting plug Inserts: Resilient neoprene inserts provide an outstanding moisture barrier, high dielectric strength, and resistance to vibration. Either pin or socket insert can be pressurized. Strain Relief Clamp: Strain relief clamps minimize tension at the solder well connection and provide a positive mechanical moisture seal. Complete field serviceability is possible with the strain relief clamp. box mounting receptacle straight plug 90 degree plug 10 MS/Standard MS3100E/F wall mounting receptacle S L R A Thread S XX R P B T 4 Holes M K Z To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 –.010 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .6250-24UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN 2.5000-16UN .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 L Max. M +.010 –.000 P Max. R ±.005 2.129 2.129 2.129 2.201 2.524 2.201 2.524 2.596 2.654 2.654 2.885 2.885 2.943 2.943 3.068 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .896 .896 .896 1.021 1.021 1.151 1.151 1.242 1.499 1.499 1.781 1.781 2.087 2.281 2.581 .719 .812 .812 .906 .906 .969 .969 1.063 1.156 1.250 1.375 1.562 1.750 1.938 2.188 * Increase Z dimension by .312 for size “0” contact only. 11 S ±.010 T Dia. +.004 –.002 Z* Max. XX Min. Cable Clearance 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .472 .472 .722 .472 .722 .472 .722 .691 .691 .691 .628 .628 .550 .550 .550 .281 .281 .281 .406 .406 .500 .500 .531 .656 .740 .781 .922 1.156 1.250 1.562 MS/Standard MS3101E/F cable connecting plug L A Thread XX B Z To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A Thread Class 2A .6250-24UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN 2.5000-16UN B Min. Full Thread J Max. L Max. Z* Max. XX Min. Cable Clearance .406 .422 .656 .391 .625 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .896 .896 .896 1.021 1.021 1.151 1.151 1.242 1.499 1.499 1.781 1.781 2.087 2.281 2.581 2.129 2.129 2.129 2.201 2.524 2.201 2.524 2.596 2.654 2.654 2.885 2.885 2.943 2.943 3.068 1.134 1.134 1.572 1.134 1.572 1.134 1.572 1.572 1.572 1.572 1.572 1.572 1.572 1.572 1.572 .281 .281 .281 .406 .406 .500 .500 .531 .656 .740 .781 .922 1.156 1.250 1.562 * Increase Z dimension by .312 for size “0” contact only. 12 J MS/Standard MS3102E box mounting receptacle S R B A Thread S N R T 4 Holes L M K Z To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 –.010 L +.000 –.010 M +.010 –.000 N Dia. +.010 –.000 R ±.005 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .375 .500 .625 .625 .625 .750 .750 .875 .875 1.000 1.125 1.250 1.375 1.625 1.875 2.062 2.312 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.062 1.156 1.250 1.375 1.562 1.750 1.938 2.188 * Increase Z dimension by .312 for size “0” contact only. 13 S ±.031 T Dia. +.004 –.002 Z +.050 –.060 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* MS/Standard MS3106E/F straight plug L Q Z B A Thread J XX To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A Thread Class 2A .6250-24UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN 2.5000-16UN B ±.005 J Max. L Max. Q Max. Z* ±.045 XX Min. Cable Clearance .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .896 .896 .896 1.021 1.021 1.151 1.151 1.242 1.499 1.499 1.781 1.781 2.087 2.281 2.581 2.129 2.129 2.129 2.201 2.524 2.201 2.524 2.596 2.654 2.654 2.885 2.885 2.943 2.943 3.068 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.718 .607 .607 .857 .607 .857 .607 .857 .857 .857 .857 .857 .857 .857 .857 .857 .281 .281 .281 .406 .406 .500 .500 .531 .656 .740 .781 .922 1.156 1.250 1.562 * Increase Z dimension by .312 for size “0” contact only. 14 MS/Standard MS3108E 90 degree plug L J Q Z U A Thread Y N To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size A Thread Class 2B J ±.005 L Max. N Max. Q Dia. Max. U Max. Y Thread Class 2B Z ±.045 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .927 .927 .951 .956 1.143 1.020 1.207 1.146 1.333 1.395 1.598 1.598 1.786 1.786 2.020 2.145 2.270 .807 .807 .901 .901 .901 1.026 1.026 1.119 1.119 1.229 1.479 1.479 1.666 1.666 2.135 2.260 2.510 .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.729 1.968 2.209 2.463 2.719 1.445 1.445 1.508 1.508 1.508 1.570 1.570 1.633 1.633 1.759 1.931 1.993 2.119 2.181 2.570 2.695 2.851 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* * Increase Z dimension by .312 for size “0” contact only. 15 MS/Standard MS-R MS-R Specification requirements for greater reliability in a shorter, lighter weight environmental resistant connector led to the design of the MS-R. MS Class R connectors satisfy all the performance requirements of MIL-DTL5015. This low profile assembly was attained by moving the axial compression nut and grommet assembly forward and flush with the rear of the insert. The neoprene grommet, with its low coefficient of friction, assures easier threading of wire bundles and quicker assembly and serviceability of the unit. Molded webs in each wire hole insure a moisture barrier around each wire. wall mounting receptacle The addition of an “O” ring at the main joint of all MS3106R plugs provide a main joint seal supplementary to the interfacial seal, thus insuring a higher degree of reliability when connector halves from different sources are employed. MS-R types are recommended for new design applications. Shells: Shell components are fabricated from high grade aluminum alloy. All components have the standard electrically conductive cadmium plated finish with an olive drab chromate after-treatment for corrosion resistance. Consult Amphenol, Sidney, NY for other plating options. cable connecting plug Contacts: Contacts are machined from copper alloy for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Both crimp and solder versions are available. Refer to pages 49, 67 and 68 for additional contact information. Inserts: Resilient neoprene inserts provide an outstanding moisture barrier, maximum vibration resistance and high dielectric strength. Either pin or socket insert can be pressurized. box mounting receptacle straight plug 16 MS/Standard MS3100R wall mounting receptacle L S K M R P Z B R S H A Thread T 4 Holes Y To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size A Thread Class 2A B Min. Full Thread H Dia. Max. K +.020 –.010 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .959 1.026 1.120 1.120 1.120 1.307 1.307 1.432 1.432 1.557 1.744 1.869 1.994 2.166 2.541 2.729 2.979 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 L Max. M +.010 –.000 P Dia. Max. R ±.005 1.588 1.588 1.588 1.588 1.931 1.588 1.931 1.588 1.931 1.931 1.931 1.931 2.009 2.009 2.072 2.072 2.072 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .557 .682 .807 .807 .807 .932 .932 1.057 1.057 1.182 1.291 1.432 1.557 1.807 2.057 2.260 2.260 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.063 1.156 1.250 1.375 1.562 1.750 1.938 2.510 * Increase Z dimension by .312 for size “0” contact only. 17 S ±.031 Y Thread Class 2 T Dia. +.004 –.002 Z +.050 –.060 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* MS/Standard MS3101R cable connecting plug L Z J B F A Thread Y Thread To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size A Thread Class 2A B Min. Full Thread F Dia. Max. J Dia. Max. L Max. Y Thread Class 2 Z ±.040 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .406 .406 .406 .422 .656 .391 .625 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .959 1.026 1.120 1.120 1.120 1.307 1.307 1.432 1.432 1.557 1.744 1.869 1.994 2.166 2.541 2.729 2.979 .557 .682 .807 .807 .807 .932 .932 1.057 1.057 1.182 1.291 1.432 1.557 1.807 2.057 2.260 2.510 1.588 1.588 1.588 1.588 1.931 1.588 1.931 1.588 1.931 1.931 1.931 1.931 2.009 2.009 2.072 2.072 2.072 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF 1.094 1.094 1.094 1.094 1.532 1.094 1.532 1.094 1.532 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* * Increase Z dimension by .312 for size “0” contact only. 18 MS/Standard MS3102R box mounting receptacle S R B A Thread S N R T 4 Holes L M Z K To complete order number, see “how to order” pg. 70. For solder well data, see page 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 –.010 L +.000 –.010 M +.010 –.000 N Dia. +.010 –.000 R ±.005 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .375 .500 .625 .625 .625 .750 .750 .875 .875 1.000 1.125 1.250 1.375 1.625 1.875 2.062 2.312 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.062 1.156 1.250 1.375 1.562 1.750 1.938 2.188 * Increase Z dimension by .312 for size “0” contact only. 19 S ±.031 T Dia. +.004 –.002 Z +.050 –.060 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* MS/Standard MS3106R straight plug L N Z Q J A Thread F Y To complete order number, see “how to order” pg. 70. For solder well data, see page 67. All lockwire holes are .045 dia. min. Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A Thread Class 2B .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN F Dia. Max. J ±.005 L Max. N Dia. Max. Q Dia. Max. Y Thread Class 2 Z ±.045 .959 1.026 1.120 1.120 1.120 1.307 1.307 1.432 1.432 1.557 1.744 1.869 1.994 2.166 2.541 2.729 2.979 .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 1.057 1.057 1.057 1.057 1.212 1.057 1.212 1.057 1.212 1.212 1.212 1.212 1.291 1.291 1.353 1.353 1.353 .557 .682 .807 .807 .807 .932 .932 1.057 1.057 1.182 1.291 1.432 1.557 1.807 2.057 2.260 2.510 .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* * Increase Z dimension by .312 for size “0” contact only. 20 MS/Standard contact and insert arrangements 21 MS/Standard insert arrangements Contact Size Contact Size 16 Insert Arrangement Service Rating Total Contacts 1 1 18-31 A 5 A 1 1 20-2 D 1 10SL-3 A 3 3 20-3 D 3 3 10SL-4† A 2 2 20-4 D 4 4 12S-3 A 2 2 20-6 D 3 3 12S-4 D 1 1 20-7 D/A 8 8 12-5 D 1 14S-1 A 3 14S-2 Inst. 14S-4 D 14S-5 Inst. 5 14S-6 Inst. 14S-7 A 14S-9 A 14S-10 Insert Arrangement Service Rating Total Contacts 8S-1 A 10S-2 0 4 8 12 0 4 8 12 16 5 1 20-8 Inst. 6 3 20-9 D/A 8 4 4 20-11 Inst. 13 1 1 20-12 A 2 5 20-14 A 5 6 6 20-15 A 7 7 3 3 20-16 A 9 2 7 2 2 20-17 A 6 5 1 Inst. 4 4 20-18 A 9 3 6 14S-12 A 3 3 20-19 A 3 14-3 A 1 20-20 A 4 16S-1 A 7 7 20-21 A 9 16S-3 B 1 1 20-22 A 6 3 16S-4 D 2 2 20-23 A 2 2 16S-5 A 3 3 20-24 A 4 2 16S-6 A 3 3 20-25 Inst. 13 13 16S-8 A 5 5 20-27 A 14 14 16-2 E 1 20-29 A 17 17 16-7 A 3 2 20-30 Inst. 13 13 16-9 A 4 2 2 20-33 A 11 16-10 A 3 3 22-1 D 2 2 16-11 A 2 2 22-2 D 3 3 16-12 A 1 22-4 A 4 2 16-13 A 2 22-5 D 6 18-1 A/Inst. 10 22-6 D 3 18-3 D 2 22-7 E 1 18-4 D 4 4 22-8 E 2 2 18-5 D 3 1 22-9 E 3 3 18-6 D 1 22-10 E 4 18-7 B 1 22-11 B 2 18-8 A 8 1 7 22-12 D 5 18-9 Inst. 7 2 5 22-13 D/A 5 18-10 A 4 4 22-14 A 19 18-11 A 5 5 22-15 E/A 6 5 18-12 A 6 22-16 A 9 3 6 18-13 A 4 22-17 D/A 9 1 8 18-14 A 2 22-18 D/A 8 8 18-15 A 4 4 22-19 A 14 14 18-16 C 1 1 18-17 Inst. 7 2 18-19 A 18-20 18-22 18-24 1 1 1 1 1 2 10 2 2 1 1 6 1 3 1 1 22-20 A 9 5 22-21 A 3 10 10 22-22 A 4 A 5 5 22-23 D/A 8 D 3 3 22-24 D/A 6 A/Inst. 10 10 22-27 D/A 9 18-29 A 5 5 22-28 A 7 18-30 A 5 5 22 2 4 1 7 13 1 1 2 3 3 1 3 1 8 3 2 11 2 2 2 4 1 1 4 2 2 3 4 1 19 1 9 1 2 4 8 2 1 4 8 7 † 10SL-4 arrangement available only with pin contacts in receptacle and socket contacts in plug MS/Standard insert arrangements, cont. Insert Arrangement Contact Size Service Rating Total Contacts D/A 7 22-34 D 5 3 22-36 D/A 8 8 24-2 D 7 7 24-3 D 7 2 24-5 A 16 24-6 D/A 8 8 24-7 A 16 2 22-33 0 4 8 24-9 A 2 24-10 A 7 7 24-11 A 9 3 24-12 A 5 24-16 D/A 7 24-17 D 24-20 D 24-21 D 10 1 24-22 D 4 4 24-27 E 7 24-28 Inst. 24 28-1 D/A 9 28-2 D 14 28-3 E 3 28-4 E/D 9 28-5 D 5 2 28-6 D 3 3 2 12 Insert Arrangement 16 Total Contacts 0 E/D 5 2 4 8 12 16 7 32-1 2 32-2 E 5 32-3 D 9 32-4 A/D 14 5 32-5 D 2 16 32-6 A 23 32-7 Inst./A 35 7 28 32-8 A 30 6 24 32-9 D 14 2 32-10 E/B/D/A 7 2 32-12 A/D 15 14 2 2 Contact Size Service Rating 6 3 3 3 1 2 2 2 4 2 12 2 16 2 2 3 12 2 3 5 10 5 18 32-13 D 23 3 3 32-15 D 8 5 2 3 32-16 A 23 2 11 2 9 32-17 D 4 4 9 32-22 A 54 36-1 D 22 7 36-3 D 6 24 36-4 D/A 3 3 36-5 A 4 4 36-6 A 6 2 36-7 A 47 7 40 1 46 1 3 6 2 12 3 2 6 3 2 16 54 4 3 18 3 4 2 7 36-8 A 47 1 2 36-9 A 31 36-10 A 48 48 48 1 2 14 14 28-7 D 2 36-11 A 48 28-8 E/D/A 12 2 10 36-12 A 48 28-9 D 12 6 6 36-13 E/A 17 28-10 D/A 7 36-14 D 16 28-11 A 22 18 36-15 D/A 35 28-12 A 26 26 36-16 A 47 7 40 28-13 A 26 26 36-17 A 47 7 40 28-15 A 35 35 36-18 A 31 28-16 A 20 20 36-20 A 34 2 2 3 4 48 2 5 5 15 6 35 1 2 14 14 2 2 30 28-17 B/D/A 15 15 36-52 A 52 28-18 C/D/A/Inst. 12 12 40-1 D 30 28-19 B/D/A 10 4 6 40-9 A 47 28-20 A 14 10 4 40-56 A 85 85 28-21 A 37 37 48-62 D 85 85 28-22 D 6 3 3 23 52 6 1 22 24 24 MS/Standard special insert arrangements Insert Arrange ment 14S-A7 16-59 20-26 20-51 20-57 20-58 20-59 20-66 20-79 22-63 22-65 22-70 22-80 24-19 24-51 24-52 24-53 24-58 24-59 24-60 24-65 24-66 24-67 24-71 24-75 24-79 24-80 24-84 24-96 24-AJ 28-51 28-59 28-66 28-72 28-74 28-75 28-79 28-82 28-84 28-AY 32-14 32-25 32-31 32-48 32-52 32-53 32-56 32-57 32-58 32-59 32-60 32-62 32-64 32-68 32-73 32-75 32-76 32-79 32-82 Service Rating A A A A A A A A A/D A A/D A A A A Hi Volt. A A A A A D Inst. A A A Inst. A Inst. A A A A Coax A A A D A A D A A Inst. D Inst./E A Coax Coax A A Coax Inst. A A Coax A D A Total Contacts 7 4 19 3 7 10 3 6 8 12 8 13 3 12 5 1 5 13 14 7 15 7 19 7 7 5 23 19 28 25 12 17 16 3 16 16 16 6 9 9 13 25 31 48 8 42 30 8 4 42 23 23 54 16 46 9 19 5 16 Contact Size 4/0 2/0 0 4 8 12 16 7 Coax** 0 4 8 12 4 19 3 7* 5 5 3* 5* 1 4 8* 8 1 7 8 5 3* 12 5 1 5 3 3 7 7 7 7* 11 7 19 4 7* 7* 5 23 1 18 28 25 2 12 7 14 10 3 7* 7* 7 2 9 9 9 9 4 4 5 13 25 31 48 2 6 5 6* 6 37 24 2 4 2 1 2 40 15 16 54 12 46 2 19 4 4 2 8 2 4 7 1 12 * Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 38-48 for application wire size. ** Coaxial cable data can be found on insert arrangement drawings, pages 38-48. For further information on coaxial contacts and cable see catalog 12 130 24 Insert Arrange ment 32-AF 36-22 36-51 36-54 36-55 36-59 36-60 36-64 36-65 36-71 36-73 36-74 36-75 36-76 36-77 36-78 36-79 36-80 36-83 36-85 36-97 36-99 36-AF 40-5 40-10 40-30 40-35 40-53 40-57 40-61 40-62 40-63 40-64 40-66 40-67 40-68 40-70 40-72 40-73 40-74 40-75 40-80 40-81 40-82 40-85 40-86 40-87 40-AD 40-AG 40-AP 40-AR 40-AS 40-AT 40-AU 40-AV 44-52 44-53 48-51 48-52 48-53 48-54 48-55 48-57 Service Rating A D D A A A A Coax Coax A Coax A A A D A A A Coax A/D C D A A A A D A E A A A Coax Coax A A A A A A E A A A A E D A A E Inst. A A A D A A A A D A A A Total Contacts 55 22 4 39 39 53 47 4 4 53 7 44 48 47 7 14 20 20 7 35 1 12 48 5 29 30 35 60 4 59 60 61 36 4 11 21 61 11 61 6 5 11 62 62 60 4 7 8 38 2 13 40 43 14 3 104 36 56 61 37 56 78 56 Contact Size 4/0 2/0 0 4 2 2 8 12 16 55 0 Coax** 4 8 12 22 8 8* 3* 7* 31 31 50 40 4 4 3 50 7 43 48* 47 1 7 12 2 20 20* 7 35* 1 3 3 4 1 9 3 3 48 5 16 29 35 60 4 1 3 3 55 60 61* 20 13 4 1 10 61 1 61 10 21 1 1 4 10 4 1 1 62* 62 60* 4 7 4 4 38 2 3 3 3 1 10 7 25 24 15 18 1 3 104 18 42 4 56 5 10 37 6 4 10 2 10 2 42 68 42 4 18 MS/Standard insert alternate positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: Degrees B A B A B A A Position W Position X Position Y Position Z View looking into front face of pin insert or rear of socket insert. Insert Arrangement 10SL-4 12S-3 14S-2 14S-5 14S-7 14S-9 16-9 16-10 16-11 16-13 16S-1 16S-4 16S-5 16S-6 16S-8 18-1 18-3 18-4 18-8 18-10 18-11 18-12 18-15 18-20 18-22 18-29 20-3 20-4 20-5 20-6 20-15 20-17 20-18 20-19 20-21 W 63 70 – – 90 70 35 90 35 35 80 35 70 90 – 70 35 35 70 – – 80 – 90 70 90 70 45 35 70 80 90 35 90 35 Degrees X Y – – 145 215 120 240 110 – 180 270 145 215 110 250 180 270 110 250 110 250 – – 110 250 145 215 180 270 170 265 145 215 110 250 110 250 – – 120 240 170 265 – – 120 240 180 270 145 215 180 270 145 215 110 250 110 250 145 215 – – 180 270 110 250 180 270 110 250 W X Y Z 80 110 250 280 16-7 20-22 22-29 24-17 28-16 32-13 18-5 22-6 22-33 24-20 28-17 32-22 18-9 22-12 22-34 24-21 28-19 32-AF 18-13 22-14 24-1 24-28 28-20 36-1 18-14 22-15 24-3 28-1 28-21 36-7 20-7 22-16 24-4 28-4 32-1 36-8 20-8 22-17 24-5 28-8 32-3 36-13 20-9 22-18 24-6 28-9 32-4 40-AR 20-12 22-19 24-7 28-10 32-6 40-AS 20-14 22-21 24-12 28-11 32-9 40-AT 20-16 22-24 24-14 28-14 32-10 40-AU 20-20 22-25 24-16 28-15 32-12 B As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. Z – 290 – – – 290 325 – 325 325 280 325 290 – – 290 325 325 290 – – 280 – – 290 – 290 – 325 290 280 – 325 – 325 Insert Arrangement 20-23 20-24 20-27 20-29 22-1 22-2 22-4 22-5 22-8 22-9 22-10 22-11 22-13 22-20 22-22 22-23 22-27 22-28 22-63 24-2 24-9 24-10 24-11 24-22 24-27 28-2 28-3 28-5 28-6 28-7 28-12 28-18 28-22 28-AY 32-2 W 35 35 35 80 35 70 35 35 35 70 35 35 35 35 – 35 80 80 20 80 35 80 35 45 80 35 70 35 70 35 90 70 70 45 70 Degrees X Y 110 250 110 250 110 250 – – 110 250 145 215 110 250 110 250 110 250 145 215 110 250 110 250 110 250 110 250 110 250 – 250 – 250 – – – – – – 110 250 – – 110 250 110 250 – – 110 250 145 215 110 250 145 215 110 250 180 270 145 215 145 215 110 250 145 215 25 Z 325 325 325 280 325 290 325 325 325 290 325 325 325 325 – – 280 280 – 280 325 280 325 – 280 325 290 325 290 325 – 290 290 – 290 Insert Arrangement 32-5 32-7 32-8 32-14 32-15 32-17 32-25 32-48 32-64 32-68 32-82 36-3 36-4 36-5 36-6 36-9 36-10 36-14 36-15 36-AF 40-1 40-5 40-9 40-10 40-35 40-AD 40-AG 40-AP 40-AV W 35 80 80 65 35 45 60 80 80 30 30 70 70 – 35 80 80 90 60 65 65 33 65 65 70 45 37 35 90 Degrees X Y 110 250 125 235 125 235 130 230 110 250 110 250 120 – – – 100 110 – – – – 145 215 145 215 120 240 110 250 125 235 125 235 180 270 125 245 – – 130 235 – – 125 225 125 225 130 230 – – 74 285 110 250 180 270 Z 325 280 280 295 280 – – – 250 – – 290 290 – 325 280 280 – 305 – 300 270 310 310 290 – 322 325 – MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated B A Insert Arrangement B A A C B Front of Socket Insert Front of Socket Insert 8S-1 10S-2 10SL-3 10SL-4 12S-3 12S-4 12-5 Service Rating A A A A A D D Number of Contacts 1 1 3 2 2 1 1 Contact Size 16 16 16 16 16 16 12 D A C B F A D C B B E B A A C D B Insert Arrangement A E A C C B 14S-1 14S-2 14S-4 14S-5 14S-6 14S-7 14S-9 Service Rating A Inst. D Inst. Inst. A A Number of Contacts 3 4 1 5 6 3 2 Contact Size 16 16 16 16 16 16 16 100˚ 100˚ D F E A C A G A C B B B D B A C 100° Rotation of 14S-2 100° Rotation of 14S-7 14S-10 14S-12 14-3 16S-1 16S-3 16S-4 Inst. A A A B D Number of Contacts 4 3 1 7 1 2 Contact Size 16 16 8 16 16 16 Insert Arrangement Service Rating E A C A A B A A D D C C Insert Arrangement B B B B C C 16S-5 16S-6 16S-8 16-2 16-7 Service Rating A A A E A Number of Contacts 3 3 5 1 1 2 2 2 Contact Size 16 16 16 12 8 16 12 16 CONTACT LEGEND 26 16 16-9 A 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated C H A A B A G A B I B J F B C B Insert Arrangement E A D 16-10 16-11 16-12 16-13 18-1 18-3 Service Rating A A A A B, C, F, G = A; Bal. = Inst. D Number of Contacts 3 2 1 2* 10 2 Contact Size 12 12 4 12 16 12 G D F A A C Insert Arrangement Service Rating F A C E H E B C B B D C D B G A 18-4 18-5 18-6 18-7 18-8 18-9 D D D B A Inst. Number of Contacts 4 2 1 1 1 1 7 2 5 Contact Size 16 12 16 4 8 12 16 12 16 E D A F D D E A A C C B C D B D B B A 18-10 18-11 18-12 18-13 18-14 Service Rating A A A A A Number of Contacts 4 5 6 1 3 1 1 4** Contact Size 12 12 16 8 12 4 16 12 B G 100˚ 18-15 A A F C E B B D E F C G A H A H J E C A B 250˚ J F C E D 100° Rotation of 18-9 Service Rating B I K Insert Arrangement A G G D D 250° Rotation of 18-1 18-16 18-17 18-19 18-20 18-22 18-24 C Inst. A A D B, C, F, G = A; Bal. = Inst. Number of Contacts 1 2 5 10 5 3 10 Contact Size 12 12 16 16 16 16 16 CONTACT LEGEND * A = Iron; B = Constantan ** A, C = Iron; B, D = Constantan B C B C Insert Arrangement A A 27 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated E 110˚ A A B A A B D A C B C D E B C E D C C B D 260˚ 110° Rotation of 18-20 260° Rotation of 18-20 18-29 18-30 18-31 20-2 20-3 20-4 Service Rating A A A D D D Number of Contacts 5 5 5 1 3 4 Contact Size 16 16 16 0 12 12 Insert Arrangement A A C G E B A B F H G L B H F F C Insert Arrangement F A D E E G N D A C C C B E B M D H A D K B J 20-6 20-7 Service Rating D A, B, H, G = D; C, D, E, F = A Number of Contacts 3 8 2 4 1 7 13 1 1 Contact Size 16 16 8 16 12 16 16 4 16 E F A E G B D 20-9 20-11 Inst. H = D; Bal. = A Inst. F E A 20-8 H H D A B D C C A Insert Arrangement G C B A A F F D C A E G I 20-12 B I E C C D B B 20-14 20-15 20-16 20-17 20-18 20-19 A A A A A A Service Rating Number of Contacts 2 3 7 2 7 5 1 3 6 3 Contact Size 8 12 12 12 16 12 16 12 16 8 CONTACT LEGEND 28 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A D A F H C G E A D B D E C F M D B L B C F 100˚ A A B I B B C E G N C H A D K J 100° Rotation of 20-11 Insert Arrangement 20-20 Service Rating 20-21 A 20-22 20-23 A A A 20-24 20-25 A Inst. Number of Contacts 1 3 1 8 3 3 2 2 2 13 Contact Size 4 12 12 16 8 16 8 8 16 16 J A A I M B L K H N G L C K B L C N T P S R B D M F J E 250˚ F H G N E D F D E H A B M J K A A K C M C L H B A D J F G C B E 250° Rotation of 20-11 Insert Arrangement 20-27 20-29 20-30 20-33 22-1 22-2 Service Rating A A Inst. A D D Number of Contacts 14 17 13 11 2 3 Contact Size 16 16 16 16 8 8 F A A E D B B A B C Insert Arrangement A B D C C 22-4 22-5 22-6 22-7 22-8 A D D E E Service Rating Number of Contacts 2 2 2 4 2 1 1 2 Contact Size 8 12 12 16 8 16 0 12 CONTACT LEGEND 29 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A A D A E B C B A E C B C B B D Insert Arrangement D A C 22-9 22-10 22-11 Service Rating E E B Number of Contacts 3 4 2 2 3 4 1 Contact Size 12 16 16 8 16 12 16 M L K J U T V B P A A A N F F B G S R G C E = D; A, B, C, D = A G E C F C H E D D C D E 22-14 22-15 Service Rating A D = E; A, B, C, E, F = A Number of Contacts 19 5 1 3 6 1 8 8 Contact Size 16 12 16 12 16 12 16 16 22-16 22-17 22-18 A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A A B K J L M P H F G H A F J B G A C E D A F A H B E D N G Insert Arrangement C B J F C D A B G E F Insert Arrangement D H B D E 22-13 A H J H 22-12 B E D C B C C D 22-19 22-20 22-21 22-22 22-23 Service Rating A A A A H = D; Bal. = A Number of Contacts 14 9 1 2 4 8 Contact Size 16 16 0 16 8 12 CONTACT LEGEND 30 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A A H F D A E C G F C C G E Service Rating B E D D Insert Arrangement A B H B C D G A F J G E F B B E C F D 22-24 22-27 22-28 22-33 22-36 C, D, E = D; A, B, F = A J = D; Bal. = A H = D; Bal. = A* A A, B, C, D = D; E, F, G = A Number of Contacts 2 4 1 8 7 7 8 Contact Size 12 16 8 16 12 16 12 A F C B F A E A A E B B F G J K M A F E G L E B C D G G B H H N E D C D D P C C R D S Insert Arrangement 22-34 24-2 D D Service Rating 24-3 24-5 24-6 A A, G, H = D; Bal. = A D Number of Contacts 3 2 7 2 5 16 8 Contact Size 12 16 12 12 16 16 12 A L K P A B F C M B N J A B C A G E A B D E F E D D I O H Insert Arrangement E G D C C F H 24-7 24-9 24-10 24-11 A A A A Service Rating B I G 24-12 A Number of Contacts 2 14 2 7 3 6 2 3 Contact Size 12 16 4 8 8 12 4 12 * A, C, E, G = Iron B, D, F, H = Constantan CONTACT LEGEND 31 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A D F B E A J C G E H K B H C L G C A B B G J F D E Service Rating C B E D Insert Arrangement A D F A D C K 24-16 24-17 24-20 24-21 24-22 A, B, F, G = D; C, D, E, = A D D D D Number of Contacts 1 3 3 2 3 2 9 1 9 4 Contact Size 8 12 16 12 16 12 16 8 16 8 A H A A F E B K L R G E B F C G N M S T A J L P G Q J C P H M X Y C V U G W A B J C D N D C B Z F Insert Arrangement K B D H F D E E 24-27 24-28 28-1 28-2 28-3 Service Rating E Inst. A, J, E = D; Bal. = A D E Number of Contacts 7 24 3 6 2 12 3 Contact Size 16 16 8 12 12 16 8 S A C P G A B E D A E Service Rating A F D Insert Arrangement B B C C B 28-4 28-5 28-6 28-7 G, P, S = E; Bal. = D D D D Number of Contacts 2 7 2 1 2 Contact Size 12 16 4 12 16 3 2 4 4 CONTACT LEGEND 32 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated H J A H M K G J F A G B E K M F L L B C V R W S K L E D D D 28-8 28-9 28-10 D G = D; Bal. = A A 10 6 6 2 2 3 4 18 Contact Size 12 16 12 16 4 8 12 12 16 A M 100˚ S a b N C U d V X K b H C U d Y F V W X K J H P D A B C D E F G J K L M R X Z G A T L S C H R Q G F N P D k m l B M U V h f j H K W g e d F J c b a N V U T S Y E L G J B T Z M E L W A S a D Y R P B T Z C 28-11 2 N B H I Number of Contacts R A G D T C L, M = E; B = D; Bal. = A P E F M C Service Rating P X E Insert Arrangement J N U G B F A E 100° Rotation of 28-12 Insert Arrangement 28-12 28-13 28-15 Service Rating A A A A Number of Contacts 26 26 35 20 Contact Size 16 16 16 16 C B H D J E L A G R A L K A B K F B L C M K C E M D J M P E H N Insert Arrangement 28-16 G J F G H 28-17 28-18 28-19 R = B; M, N, P = D; A to L = A M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst. H, M = B; A, B = D; Bal. = A Number of Contacts 15 12 4 6 Contact Size 16 16 12 16 Service Rating CONTACT LEGEND 33 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A J B N E K S C R E r B Z B f m E p E J X k j A F e d h n F Insert Arrangement c C P W V b g H N U a D M L T L M G D G F K P H A C A B D D C s 28-20 28-21 28-22 32-1 A A D A = E; B, C, D, E = D Service Rating Number of Contacts 10 4 37 3 3 2 3 Contact Size 12 16 16 4 16 0 12 B F A A C E D E G F A K A L B O C B H G D J M D H C E N B J Insert Arrangement 32-2 Service Rating 32-3 E D Number of Contacts 3 2 1 2 2 Contact Size 4 16 0 4 12 16 A B G H C E I K P J L M X d N R h e S T k U V W X L Z T M 2 12 16 0 A G B a D e P W R S D H E F I J G K L L M N O 32-6 32-7 32-8 A A, B, h, j = Inst.; Bal. = A A Service Rating C C G X B B F K b I b A A E J V d D I O Z C N U H N U c H V Insert Arrangement 12 Y K S a g 2 T E Y f D J R F j O F, J, K, N = A; Bal. = D 4 c F 32-5 M P W D 32-4 32-9 D Number of Contacts 2 3 2 16 7 28 6 24 2 12 Contact Size 4 8 12 16 12 16 12 16 4 16 CONTACT LEGEND 34 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A F A M C E N B A G B E D H F G J X L K A B P R B C Y W K S C D D E Z V J D C L M T N E F U H O Insert Arrangement Service Rating H F P G G 32-10 32-12 32-13 A, F = E; G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D D 32-15 D Number of Contacts 2 2 3 5 10 5 18 2 6 Contact Size 4 8 16 12 16 12 16 0 12 A 100˚ E G H P L M J A N S m T V AB C X w k q x F G H J K L M N r v y z I f j u t B E C W e p n B a Z d h g D R V U Y c s U P O X b A J M L T S N O H K F R E G F D W B D C D I K A B C O AC P R S U V W T AA AD AE AG AF 100° Rotation of 32-6 Insert Arrangement 32-16 32-17 32-22 A D A Service Rating 36-1 D Number of Contacts 2 3 2 16 4 54 4 18 Contact Size 4 8 12 16 4 16 12 16 A A A A F F D E B B B E C C B C D C Insert Arrangement 36-3 36-4 36-5 D A = D; B, C = A A Service Rating D 36-6 A Number of Contacts 3 3 3 4 2 4 Contact Size 0 12 0 0 0 4 CONTACT LEGEND 35 16 12 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated A B D C H O I K L P U Y Z h d j B J G N M R W g n u n s Z H Y e f b F R L X c G T N z Insert Arrangement 36-7 36-8 A A Service Rating 36-9 A Number of Contacts 7 40 1 46 1 2 14 14 Contact Size 12 16 12 16 4 8 12 16 A C H O V J P W d E R g h p n y Insert Arrangement V k r w v O c b j q u U a C H N T Z f t M S Y 100˚ G L Q e A F K X m B D J P W d s K m R Y z S g u M r w H U V c P W Q S n p z y 36-12 36-11 A A Number of Contacts 48 48 48 Contact Size 16 16 16 S A K d Q I S B T L R P A A R B C K c P U k Q B Q H G F N H L m E N D M D E Insert Arrangement Service Rating X Z L Y J 36-13 36-14 36-15 N, P, Q = E; Bal. = A D M = D; Bal. = A Number of Contacts 2 15 5 5 6 35 Contact Size 12 16 8 12 16 16 CONTACT LEGEND 36 16 12 F G H K F E W g a M G D f b h C C V e j J s x 110° Rotation of 36-10 A M r w 100° Rotation of 36-10 J c k z 36-10 N U b j q v Service Rating P a h u N T Z g 110˚ G M R f t x F L Y e m s E K X d k B D J O b j q y N a h v C T Z p n t G L Q f A F E X e x B D B C K W y z A P w x D E J V r t I O d e j p u v y R a h k a V d c g m w U X s x P Y T p v r L M U Z H K M O b f m k F J W c b f t C E D I S X a e N T S V S A E G F 8 4 0 MS/Standard contact arrangements front face of pin insert or rear face of socket insert illustrated B A C 100˚ H R N d Z h j c b f k Y r Z d h j n u Y R G y x T N z 100° Rotation of 36-7 110° Rotation of 36-7 100° Rotation of 36-9 36-16 36-17 36-18 A A Service Rating F L X c A Number of Contacts 7 40 7 40 1 2 14 14 Contact Size 12 16 12 16 4 8 12 16 A C H E J A B B D F K G L M E L N C D H F M A K J N P R X S Y T V b a Z h e d U j T W a c f U V c R b j g k f v J 36-52 A A i N T O U V Y W Z a c d D 52 6 24 Contact Size 8 12 16 16 12 16 1 G F H D E I J E N P O U V W b c d Q X K L N R S Y Z g h T P j f l m p q i j K L AD AE AZ BJ AS BA w AT BB BK BD BM BT AL AW BE BN BU r AA AK AV AU BC BL BS AJ z BP s 29 AB AM AX BF 20 g q y 13 21 30 39 14 22 31 40 BH 48 49 58 32 41 BR 50 59 Service Rating 67 u 16 24 33 42 51 60 68 10 17 25 34 43 52 61 69 76 40-56 11 18 26 35 44 53 62 19 27 36 45 70 54 63 77 71 78 28 37 46 55 64 72 83 79 84 38 47 56 65 73 57 66 A A D 1 22 24 85 85 Contact Size 8 12 16 16 16 CONTACT LEGEND 80 74 81 85 48-62 Number of Contacts 37 4 9 BV 75 40-9 15 23 82 Insert Arrangement 3 8 AN AY s t 2 7 W f p x AH AF V d n 6 M U c b m v AR T a k u AP n r 5 D J S Z i t a o k H R Y h AC e C 12 X M B F X b 40-1 30 C S e 2 A R x AC 2 B L P Number of Contacts A G K AF 36-20 Service Rating M r w AB I AH AE Insert Arrangement h q AD F Z Y p AA z C E S g n u t y m X d m s k W B D H P B C K W b s y H f m p v w z Insert Arrangement g k r s x f t A P e c b a D E J d X I O V T W e a S R V M U Z N M U p m v w P g t u O J I L 100˚ 110˚ G H K X a e n T S W V U E F J S B D C M L P Y E G I K O A D F 16 12 8 4 0 Special contact arrangements Requirements for more complex circuits prompted Amphenol to provide inserts not covered by the MS drawings. Illustrated here and on the following pages are insert layouts which have from one contact (high tension) to the 104 contact insert in shell size 44. Many of these special inserts are also available in alternate keyway arrangements. Please contact Amphenol, Sidney, NY for additional information on special circuit application requirements. front face of pin insert or rear face of socket insert illustrated M J A L A B A G F C E B C H D P T S K H E G A E D D B D E C C B B F Insert Arrangement A L R G F A C B C V J D N U K F 14S-A7 16-59 20-26 20-51 20-57 Service Rating A A A A A Number of Contacts 7 4 19 3* 7* 5 5 Contact Size 16 12 16 8 12 for #14 or 16 wire 12 16 A E G A C D C C F E D H M C N E J B L P F E M K B B D N D A K H H A B E Insert Arrangement J A F L F A G C H F C B B A 20-58 D 20-59 20-66 20-79 22-63 22-65 Service Rating A A H = D; Bal. = A A H = D; Bal. = A Number of Contacts 3* 1 5 7* 1* 4 8 8* 8 5 8 for #10 or 12 wire 16 12 for #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire 12 16 Contact Size L B E C K A D E B D H F J N A K F B D M A C E C C B 22-80 24-19 24-51 24-52 24-53 Service Rating A A A Hi-Volt A Number of Contacts 3* 12 5* 1 5* 3 3 8 for #10 or 12 wire 16 B, E for AN #10 or 12 wire A, C, D for AN #8 wire 12 8 8 12 16 Contact Size L E D J Insert Arrangement H P B M C A A N A 22-70 CONTACT LEGEND * Solderless 38 16 24-58 A 12 8 4 7 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated P L J N K R M H F L A F E B J B G D C C P C J A M K E L 24-60 24-65 24-66 24-67 A A A D Inst. Number of Contacts 7 7 7* 11 4 7 19 Contact Size 12 16 8 for #10 or 12 wire 12 16 12 12 A F A G E F B E E E B F K B L D N T P P S G Q C V H U B N T U J A C W X 24-75 24-79 24-80 A A A Inst. M K Z 24-71 Service Rating D R J V C Insert Arrangement M S R C H 90˚ E C D G A D D B F A G B N U 24-59 Service Rating C V T D F P C D D Insert Arrangement G E R S H R H E B N S D F A F M B 90˚ E A K A G L 24-84 A Number of Contacts 2* 5* 5 2 5 23 1 Contact Size 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16 12 12 (Coax) RG-188/U or RG-174/U 16 15 14 12 21 9 4 E K C G F M L D N P B P K Q N M L A H J H R A L N S T B U C D T 26 8 5 19 20 10 3 25 18 B A 2 17 28 22 27 11 J 1 24 23 13 18 6 7 R S W X Y a M V U Z F C E E D H F J K Insert Arrangement 24-96 24-AJ 28-51 Service Rating Inst. A A Number of Contacts 28 25 12 7 10 Contact Size 16 16 12 12 16 CONTACT LEGEND * Solderless 39 28-59 A 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated R P N M T A D S B A N B R M T K M T K E J B R P L C D A N B R P L C E C D K E J D A F T C S J B H H K Insert Arrangement P L M L A N C S H F S E H F F J 28-66 Service Rating 28-72 A 28-74 28-75 A A – 28-79 A Number of Contacts 2 14 3 9* 4* 3* 9* 7* 7 9 Contact Size 8 12 4 (Coax) RG-59A/U or RG-62A/U 16 8 8 for #10 wire (S, T, R) 16 8 for #10 wire 8 16 13 1 1 H 2 3 B A 10 C A G F 4 B C I 5 E 12 H 23 4 8 7 6 10 5 8 6 Insert Arrangement 6 7 28-82 28-84 28-AY 32-14 D A A D A Service Rating 32-25 Number of Contacts 2 4 9 4 5 13 25 Contact Size 8 12 8 4 16 12 12 A C D 1 16 2 15 3 17 18 14 26 27 25 13 24 23 11 10 19 31 20 29 21 22 8 6 7 9 Y 5 28 30 12 R 4 B E L K J S j i q b s d m k r w c y x BB C g Y X W D F E v AA R A F H CC a b j k Z J H p n z B X P L K f u t A P W N M 90˚ H N V U a Z h T F M 4 18 20 9 5 15 16 17 22 21 J D 24 25 19 13 3 14 3 F G E 2 11 11 9 D 1 12 2 q r U f n g V p s B v T d m i h S c u t E D C w G 90° CW Rotation of 32-15 Insert Arrangement 32-31 32-48 32-52 32-53 Service Rating A Inst. D t, u = E; Bal. = Inst. Number of Contacts 31 48 6 2 5 Contact Size 16 16 12 0 12 16 CONTACT LEGEND * Solderless 40 16 12 8 37 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated M T d J D K R A C C G b F i h P 32-57 32-58 A ** – Number of Contacts 24 6 6 2 Contact Size 16 12 for #10 wire 12 0 (Coax) RG-71/U R A H A S P Z E K V X W D M M T s V 8 12 16 35 44 Insert Arrangement 38 24 46 42 26 40 27 41 28 11 M J N AC P R Q AE AG 32-68 A 54 12 4 8 (Coax) RG-124/U 16 16 4 (Coax) RG-58C/U 29 10 4 9 2 3 6 D A A B 5 7 D C 5 25 39 1 8 4 45 12 L 3 43 30 r K 2 1 2 23 37 13 AD E H 1 22 36 31 G v y Inst. 16 D C F q u AA 32-64 4 32 p x z B f k j t w W a e ** 8 (Coax) RG-124/U 14 V 32-62 16 15 h R Z d A Contact Size 33 U Y 32-60 2 34 P AF 1 17 AB X 2 16 n m U 8 18 c A J M O g K E H L T S S 15 21 N R Number of Contacts 20 D G K N L Service Rating 19 C F O C B A W Insert Arrangement 8 (Coax) RG-161/U X B N L A 16 J P 32-59 4 (Coax) RG-161/U or RG-179/U b U Y J K 2 F H I J T a G M H f L 40 D E N g 4 B C F d R 32-56 Service Rating c t F G Insert Arrangement E s v D b U j S H T w k T B C a m U L S X D E F W B Z n V B P a C E V e A O Z B q p W I A X D U c Y A H N Y 8 9 10 11 E 6 7 6 G H K L M J 13 14 15 3 5 9 F 2 7 8 E 12 17 4 18 N 16 19 C P R Q B 32-73 32-75 32-76 32-79 Service Rating A 8, 9 = D A D Number of Contacts 46 2 7 19 4 1 4 12 Contact Size 16 12 8 (Coax) RG-180B/U 12 4 8 4 16 CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 41 32-82 A 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 14 A D F H L N S P Y Z c e j h n m k p s q u t w r v x 19 y z AB V AE AF Insert Arrangement D C j AG q 8 S L R P M N 32-AF 36-22 36-51 A D D Number of Contacts 55 22 2 2 8 31 Contact Size 16 12 0 4 8 16 b a A C X F n q H f g T L M N V W X c p i d p Insert Arrangement Service Rating P N b i j s z y AA AE AC L R T a r x B k Y t AB h L P U J e f g m k t p v r s w x y AJ C z 36-55 36-59 36-60 A A ** 36-64 – Number of Contacts 31 8 50 3 40 7 Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire A B E D B M N V W X c d m u P n g p w y 48 T U Z a b i r x j s z AA F 50 B 55 58 63 67 E 80 61 65 69 73 77 86 AF 75 79 82 83 85 AH AD 66 70 74 78 81 87 91 88 D 89 90 AJ Insert Arrangement 64 72 76 57 60 68 71 C G 52 54 56 59 62 k t AB 49 51 53 84 AE AC C A S h q 0 (Coax) RG-11/U, RG-12/U or RG-13/U K J R Y f v H F L 4 C D A B c b u D X a d j T S W Z AF N M R V n A E G I K AH AD M A D H O q w S Z h 36-54 F U R Y g n v A C K J P f m u J K h S C D H F E d t r j D m s k W U E c Y V A B B J K Service Rating Z f p h B 7 H g T 6 9 F n i U 18 AC AH AD 5 17 10 AA E d t r 4 D m s W 16 11 f C X k 22 a d g W B c Y 15 20 V A Z 3 R U X 21 12 M O T b J b a A 2 E G K 1 13 B C 36-65 36-71 36-73 Service Rating – A – Number of Contacts 4 3 50 7 43 1 0 (Coax) RG-59/U, RG-62/U or RG-71/U 12 16 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/U Contact Size CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 42 36-74 A 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 1 31 29 28 27 33 30 26 3 34 36 48 5 6 9 39 9 8 10 13 47 24 46 23 22 42 45 21 43 13 44 15 20 18 31 14 19 32 33 34 35 13 G 7 39 4 45 17 47 D 6 5 36-75 36-76 36-77 Service Rating A A D Number of Contacts 48 47 7 2 12 16 for #14 wire 16 4 16 8 Contact Size 1 36-78 A 1 3 4 5 2 3 4 Q 5 F B 7 8 11 12 13 9 10 6 7 8 14 15 11 12 13 9 10 14 15 A U V W G M h g Z Y a 16 17 18 19 16 17 18 19 Insert Arrangement X L D 20 D f m j b C C e k N E B T d c P 6 S R A 2 3 12 C 44 46 Insert Arrangement E 42 43 19 14 26 30 38 41 2 11 8 21 25 29 37 40 1 9 17 20 24 B 12 16 28 36 F 11 15 23 27 16 8 10 18 11 12 7 14 10 A 5 6 7 38 40 4 22 25 2 3 4 37 35 41 1 2 32 K 20 H J 36-79 36-80 36-83 36-85 A A – M = D; Bal. = A Number of Contacts 20 20 7 35 Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U 16 for #12 wire A 1 d z y 8 2 e Q f A B P x g O 9 w 12 3 7 v 6 c X M W L C a U b D T E G H N j m C n r q B k F V J s h S Z K t 11 R Y N u 4 F G Service Rating 10 E G p 5 Insert Arrangement 36-97 36-99 36-AF 40-5 Service Rating C D A A Number of Contacts 1 3 3 3 48 5 4/0 4 8 12 16 16 0 Contact Size 3 CONTACT LEGEND 43 16 12 8 4 0 4/0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 19 C F E D J 1 16 2 18 A B 17 H K G 21 5 30 L N 13 28 S 23 T V Z Insert Arrangement Service Rating 8 25 b 12 a 24 22 23 11 46 57 59 50 8 14 34 13 40-30 40-35 A D 40-53 A Number of Contacts 4 9 16 29 1 35 60 Contact Size 4 8 16 12 4 12 16 1 8 9 10 1 2 4 5 11 6 24 7 12 23 13 14 22 15 17 25 33 18 26 34 42 4 2 50 19 27 35 43 51 20 28 36 44 21 29 37 45 52 22 30 38 46 23 31 39 47 48 20 18 50 48 35 15 33 12 40-61 A Number of Contacts 4 1 3 55 60 Contact Size 0 8 12 16 16 P A 21 41 54 40 20 44 28 38 17 47 16 48 34 14 13 9 4 2 E Z Y 3 F J 11 H 40-63 40-64 A – Number of Contacts 61 16 for #14 wire D W X a Service Rating Contact Size V k b K 10 12 m 8 33 35 15 c 32 49 C U q 7 31 58 50 T j n d L S i p 6 30 57 36 1 B g f 29 51 37 M 5 46 59 A R h 45 56 61 52 4 27 43 40-62 N 3 26 60 39 18 Insert Arrangement 2 25 55 53 19 1 24 9 10 11 13 E 42 8 31 32 34 40-57 23 7 30 47 49 Service Rating 22 6 29 57 58 14 Insert Arrangement 45 46 36 58 3 5 28 56 59 16 59 55 51 37 56 44 60 38 49 4 27 52 17 57 54 39 3 26 43 53 19 41 55 42 40 32 40 54 53 24 2 25 41 21 16 11 12 A 3 9 10 40-10 1 32 33 35 7 8 31 48 49 36 16 7 58 37 30 47 51 17 15 10 5 6 60 38 9 9 4 28 45 55 29 52 6 10 3 27 44 56 18 21 24 26 13 X W c Y 53 5 31 11 7 U 43 54 19 20 32 25 14 R 26 12 6 27 2 26 39 30 35 41 40 20 4 19 33 Q O 27 22 15 P M 3 1 25 42 21 29 34 16 22 2 18 14 4 24 23 17 28 29 I 1 15 3 20 3 20 12 16 – 13 4 8 (Coax) RG-124/U CONTACT LEGEND 44 40-66 0 (Coax) RG-63B/U 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated A A N B 1 P M B W E D F H 11 C X V K 19 D S 12 20 28 J 36 J E T U 13 21 29 37 45 22 38 F M Insert Arrangement 23 39 41 55 59 40-68 A A 43 51 44 52 57 61 40-70 A 10 21 61 Contact Size 16 4 (Coax) RG-59/U 8 16 A 22 42 21 41 54 40 20 C D E J 18 44 28 29 30 57 47 36 16 9 33 34 14 13 3 8 32 35 M 4 48 49 15 L 7 31 58 50 5 6 46 59 37 2 5 45 56 51 17 K 43 6 4 27 61 52 1 3 26 60 39 38 H 2 25 55 53 19 1 24 23 B 10 11 12 40-72 40-73 A A Service Rating 27 35 G 1 Insert Arrangement 42 56 18 26 34 50 60 Number of Contacts F 17 25 33 49 40-67 Service Rating 24 40 54 10 16 32 48 58 9 15 31 47 5 8 14 30 46 4 7 53 H L K 3 6 R L C 2 40-74 A Number of Contacts 1 10 61 1 1 4 Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U or RG-214/U 1 A 1 B 5 6 2 3 7 4 8 9 10 11 5 12 4 20 2 C E D F H 21 29 37 J 13 22 30 38 46 14 23 31 39 47 24 40 17 25 33 41 49 55 59 16 32 48 54 3 15 26 34 42 50 56 60 18 35 43 51 57 61 19 27 28 36 44 52 45 53 58 62 L K M Insert Arrangement 40-75 40-80 E A Service Rating 40-81 A Number of Contacts 1 4 1 10 62 Contact Size 12 0 16 4 16 for #14 wire CONTACT LEGEND 45 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 1 5 12 20 6 13 21 2 3 7 14 22 4 8 9 15 23 16 24 17 25 24 23 10 22 11 18 26 27 41 21 19 28 1 53 1 44 28 45 39 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 47 48 54 49 55 50 56 51 57 52 57 38 51 17 50 60 61 62 14 Insert Arrangement 32 34 13 4 2 9 33 35 15 10 4 3 11 12 3 40-82 40-85 40-86 40-87 Service Rating A A – D Number of Contacts 62 60 4 7 Contact Size 16 16 for #14 wire 0(Coax) RG-115A/U 4 20 38 A 37 B H 9 22 C 7 35 A 2 6 C M 10 18 G B N 21 8 19 36 2 8 31 48 49 36 16 59 58 37 7 30 47 59 53 58 7 46 45 18 46 5 6 60 52 37 5 29 56 19 1 4 27 55 6 3 26 43 54 40 20 2 25 42 D B 23 3 1 34 A L 24 11 E 17 5 E 33 D F 4 16 32 14 29 G 28 40-AD 40-AG 40-AP A A E Service Rating F J 27 30 H K 26 13 31 Insert Arrangement 25 12 15 40-AR Inst. Number of Contacts 4 4 38 2 7 3 3 Contact Size 8 0 12 4/0 12 4 0 31 27 37 15 39 1 11 3 26 14 40 34 6 17 12 25 24 38 16 5 4 23 13 E 2 25 10 2 1 16 36 9 7 18 28 35 8 19 29 17 33 34 32 30 18 P 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 43 F A B 3 19 N A 4 D 39 20 5 C 20 M 12 24 15 22 13 21 14 Insert Arrangement 22 H 6 21 11 23 C 7 10 9 L J K 8 40-AS 40-AT 40-AU A A A Service Rating B G 40-AV D Number of Contacts 15 25 24 18 1 3 10 1 3 Contact Size 16 12 12 16 8 4 8 16 2/0 CONTACT LEGEND 46 16 12 8 4 0 2/0 4/0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 30 A C L D B E M F N P J R R K S T g f r W AP Y h s AC X t AD AR i AE a j u AS Z B k v AF AT m w AU AJ n AV z AK AW 27 AY f N AN AM V g AB p BC BN BD BP BY BE BR BZ CH BF BS CA CJ BH BT CB CK BJ BU CC CL CR BK BV CD CM BW CE CN m q 23 X k c BX F 44-52 44-53 A A Service Rating 7 8 C B 36 37 9 11 38 42 13 40 14 16 18 43 10 12 39 44 J Insert Arrangement A 45 19 H K D 46 21 20 Z a L CS E Y b CF CP 47 22 BM M 35 48 BA AZ BL 49 24 D j d BB 6 25 W i n 5 34 31 26 C 4 32 52 50 U h q AA AL AX P d p y x AH c 33 51 U b 3 28 T V 2 1 29 A S H 41 17 15 48-51 A Number of Contacts 104 18 18 42 10 4 Contact Size 16 16 8 (Coax) RG-124/U 16 8 0 (Coax) RG-41/U 31 1 32 2 3 A 30 44 29 A 43 34 5 28 42 51 26 C D E F G H J 6 52 27 B 4 33 45 53 56 7 35 46 K L M N P R 8 25 S B D T U V W X Z 9 24 23 22 55 50 41 E 48 21 g j k m n p r s 15 48-52 Service Rating h 16 17 Insert Arrangement f 14 C 18 e d 12 13 19 c b 10 11 37 38 39 20 47 36 49 40 a 54 48-53 A D Number of Contacts 56 5 37 Contact Size 16 0 (Coax) RG-41/U 12 CONTACT LEGEND 47 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 30 2 1 29 35 28 27 4 33 51 50 32 34 31 26 6 25 49 7 8 24 23 47 22 D A C B 36 46 21 20 11 38 42 45 19 9 18 43 Insert Arrangement 72 67 28 68 55 27 26 25 65 48 51 23 22 49 20 21 16 48-55 A 42 10 4 68 2 2 6 Contact Size 16 0 (Coax) RG-59/U 16 12 8 4 2 1 30 27 4 33 26 27 48 23 47 D A C B 7 8 23 37 42 9 11 10 12 39 13 40 44 47 22 21 20 Insert Arrangement C B 7 8 36 37 42 45 19 9 11 13 14 16 18 43 15 10 12 39 40 44 48-57 Service Rating A 38 41 17 D 46 14 16 18 43 35 48 38 45 49 24 36 46 19 6 25 35 5 34 31 26 6 49 24 4 32 52 50 34 31 33 51 5 32 52 50 21 20 3 28 51 22 2 1 29 3 28 25 15 17 18 19 12 13 14 47 52 Number of Contacts 30 46 64 50 53 24 A 29 11 45 63 66 54 48-54 8 10 76 71 15 Service Rating 8 9 41 17 7 44 70 69 14 16 43 75 74 73 6 42 56 13 40 44 10 5 61 62 30 12 39 4 41 78 29 37 3 40 39 77 57 31 35 48 58 2 1 60 59 33 5 32 52 34 38 37 36 3 41 17 15 48-60 A A Number of Contacts 42 10 4 42 10 4 Contact Size 16 0 16 0 (Coax) RG-214/U 8 CONTACT LEGEND 48 8 16 12 8 4 0 Thermocouple contact availability A complete line of cylindrical connectors containing thermocouple insert arrangements is available. The contact layout for a particular arrangement will be found in either the MS/Standard contact arrangement section, pages 26-37, or the Special contact arrangement section, pages 38-48. All thermocouple contact layouts may contain either iron, alumel, chromel, constantan, standard (copper) or brass (dummy) contacts. See the thermocouple tabulations on the following pages. The following abbreviations are used in the contact material column in the charts that follow. Also, thermocouple contacts are color coded as shown. (This identification is made by means of small dots of stain on the solder well end of the contact). Abbreviation Material Ir. Iron Color Code Black Con. Constantan Yellow Cu. Copper Alloy N/A Ch. Chromel White Al. Alumel Green Dummy Brass N/A WIRE WELL DATA Solder Well Barrel Outside Dia. Contact Size Well Inside Dia. +.004 –.002 Well Depth +.031 –.000 12 .125 .250 .166 ±.003 16 .094 .188 .125 –.004 +.002 RECOMMENDED WIRE I Chromel - Alumel Use wire in accordance with MIL-W-5848 II Iron - Constantan Use wire in accordance with MIL-W-5845 49 Thermocouple contact arrangements Shell Size and Arrg. Similar to MS Arrg. Total Contacts Contact Size 10SL-51 10SL-52 10SL-53 10SL-54 10SL-55 10SL-56 10SL-57 10SL-58 10SL-59 10SL-60 10SL-61 10SL-62 10SL-63 10SL-64 10SL-4 10SL-4 10SL-4 10SL-3 10SL-3 10SL-4 10SL-4 10SL-3 10SL-4 10SL-4 10SL-4 10SL-3 10SL-3 10SL-3 2 2 2 3 3 2 2 3 2 2 2 3 3 3 2 2 2 3 3 2 2 3 2 2 2 3 3 3 Pin Insert Rotation CW 45° 45° 45° None None None None None None None None None None None 12S-51 12S-54 12S-55 12S-56 12S-57 12S-58 12S-59 12S-60 12S-61 12S-62 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 315° 315° 45° None 60° 120° None None None None A = Ch.; B = Al. A = Ir.; B = Con. A = Cu.; B = Con. A = Al.; B = Ch. A = Ch.; B = Al. A = Ir.; B = Con. A = Ir.; B = Con. A = Cu.; B = Con. A = Ch.; B = Con. A = Ch.; B = Al. 14S-51 14S-52 14S-53 14S-54 14S-55 14S-56 14S-57 14S-58 14S-59 14S-60 14S-61 14S-63 14S-64 14S-65 14S-67 14S-68 14S-69 14S-70 14S-71 14S-72 14S-73 14S-9 14S-2 14S-9 14S-6 14S-2 14S-2 14S-2 14S-7 14S-9 14S-9 14S-6 14S-6 14S-2 14S-6 14S-6 14S-2 14S-7 14S-2 14S-2 14S-9 14S-2 2 4 2 6 4 4 4 3 2 2 6 6 4 6 6 4 3 4 4 2 4 2 4 2 6 4 4 4 3 2 2 6 6 4 6 6 4 3 4 4 2 4 90° 45° 90° 45° 45° 45° 45° 45° 90° None 45° None None None None 45° None None None None None A = Al.; B = Ch. A, B = Cu.; C = Al.; D = Ch. A = Ir.; B = Con. A, C, E = Ir.; B, D, F = Con. A, C = Ir.; B, D = Con. A = Ir.; B = Con.; C, D = Cu. A, C = Al.; B, D = Ch. A = Al.; B = Ch.; C = Cu. A = Cu.; B = Con. A = Al.; B = Ch. A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu. A, C = Al.; B, D = Ch.; E = Ir.; F = Con. A, C = Con.; B, D = Cu. A, C., E = Cu.; B, D, F = Con. A = Al.; B = Ch.; Balance = Cu. A = Ch.; B = Con.; C, D = Cu. A = Con.; B = Ch.; C = Cu. A, D = Ch.; B, C = Al. A, B, D = Cu.; C = Con. A = Con.; B = Cu. A, B = Cu.; C = Al.; D = Ch. 12 16 Contact Material A = Ir.; B = Con. A = Cu.; B = Con. A = Al.; B = Ch. A = Ir.; B = Con.; C = Cu. A = Al.; B = Ch.; C = Cu. A = Al.; B = Ch. A = Ch.; B = Con. A = Ch.; B = Al.; C = Cu. A = Ch.; B = Al. A = Ir.; B = Con. A = Cu.; B = Con. A = Cu.; B = Al.; C = Ir. A, C = Con.; B = Ch. A, C = Ch.; B = Al. 50 Thermocouple contact arrangements Similar to MS Arrg. Total Contacts 14S-74 14S-75 14S-76 14S-77 14S-78 14S-2 14S-2 14S-2 14S-2 14S-9 4 4 4 4 2 4 4 4 4 2 Pin Insert Rotation CW None None None None None 16S-52 16S-54 16S-55 16S-4 16S-1 16S-1 2 7 7 2 7 7 None None None A = Ch.; B = Al. A = Al.; B = Ch.; Balance = Cu. A = Con.; Balance = Cu. 16-52 16-53 16-55 16-56 16-57 16-58 16-60 16-62 16-11 16-9 16-10 16-13 16-10 16-10 16-13 16-11 2 4 3 2 3 3 2 2 90° 70° 45° 90° None None None None A = Al.; B = Ch. A = Al.; C = Ch.; B, D = Cu. A = Al.; B = Ch.; C = Cu. A = Con.; B = Cu. A = Al.; B = Cu.; C = Ch. A = Con.; B, C = Cu. A = Al.; B = Ch. A = Con.; B = Cu. 18-51 18-52 18-53 18-54 18-56 18-57 18-59 18-60 18-61 18-62 18-63 18-65 18-66 18-67 18-68 18-69 18-70 18-71 18-72 18-73 18-74 18-12 18-11 18-12 18-15 18-1 18-12 18-12 18-11 18-12 18-12 18-15 18-12 18-1 18-12 18-11 18-1 18-11 18-15 18-15 18-9 18-12 6 5 6 4 10 6 6 5 6 6 4 6 10 6 5 10 5 4 4 7 6 None None None None 45° 45° 45° 45° None None None None None None None None None None None None None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy A, D = Ir.; B, E = Con.; C, F = Dummy A, C = Al.; B, D = Ch. A, C, E, G, I = Ir.; B, D, F, H, J = Con. A, C, E = Al.; B, D, F = Ch. A, C = Ir.; B, E, F = Con.; D = Cu. A, D = Al.; B, C, = Ch.; E = Cu. A, C = Ir.; B, D = Con.; E = Ch.; F = Al. A, B, C = Ir.; D, E, F = Con. A, C = Con.; B, D = Cu. A = Ir.; B = Con.; Balance = Cu. A, C, E, G, I = Cu.; B, D, F, H, J = Con. A, C, E = Cu.; B, D, F = Con. A, D = Al.; B, C = Ch.; E = Cu. A = Al.; B = Ch.; Balance = Cu. A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu. A = Con.; Balance = Cu. D = Con.; Balance = Cu. A = Al.; D = Ch.; Balance = Cu. A = Ch.; B = Al.; D = Ir.; E = Cu.; C, F = Con. 20-52 20-56 20-60 20-61 20-62 20-64 20-4 20-7 20-7 20-29 20-15 20-27 4 8 8 17 7 14 315° 45° 45° 45° 80° None A = Ir.; B = Con.; C = Ch.; D = Al. A, B, G, H = Ir.; C, D, E, F = Con. D = Ch.; E = Al.; Balance = Cu. A, B, M = Cu.; Balance = Con. A, C, E = Al.; B, D, F = Ch.; G = Cu. A = Al.; C = Ch.; Balance = Cu. Shell Size and Arrg. Contact Size 12 2 2 3 2 3 3 2 2 16 2 6 5 6 4 10 6 6 5 6 6 4 6 10 6 5 10 5 4 4 2 5 6 4 8 8 17 7 14 Contact Material A, B = Ch.; C, D = Al. A, B = Cu.; C, D = Con. A, C = Al.; B, D = Ch. A, D = Al.; B, C = Ch. A = Ch.; B = Al. 51 Thermocouple contact arrangements Shell Size and Arrg. Similar to MS Arrg. Total Contacts 20-65 20-67 20-68 20-69 20-70 20-71 20-74 20-75 20-77 20-80 20-81 20-82 20-27 20-16 20-7 20-27 20-29 20-29 20-29 20-15 20-16 20-27 20-27 20-29 14 9 8 14 17 17 17 7 9 14 14 17 22-36 22-57 22-60 22-62 22-68 22-69 22-71 22-72 22-73 22-74 22-75 22-76 22-77 22-78 22-79 22-23 22-14 22-14 22-23 22-19 22-19 22-14 22-5 22-5 22-23 22-23 22-19 22-14 22-10 8 19 19 8 14 14 19 6 6 8 8 21 14 19 4 24-56 24-57 24-62 24-20 24-28 24-28 11 24 24 24-63 24-28 24-64 24-68 24-81 Contact Size 12 2 7 2 16 14 7 8 14 17 17 17 7 14 14 17 8 Pin Insert Rotation CW None None None None None None None None None None None None Contact Material A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con. H = Al.; I = Ch.; Balance = Cu. A, B, G, H = Con.; C, D, E, F = Cu. A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con. A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con. S = Al.; R = Ch.; Balance = Cu. A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu. G = Al.; Balance = Ch. A = Con.; Balance = Std. A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con. A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al. A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu. 21 14 19 4 347° 45° 45° 60° 45° 45° None None None None None None None None None A, C, E, G = Ir.; B, D, F, H = Con. A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu. U = Al.; N = Ch.; Balance = Cu. A, B, F, G = Al.; C, D, E, H = Ch. A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con. A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con. V = Al.; U = Ch.; Balance = Cu. B = Al.; E = Ch.; Balance = Cu. E = Al.; B = Ch.; Balance = Cu. A, C, E, G = Ir.; B, D, F, H = Con. A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con. W = Con.; Balance = Cu. B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con. A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu. A, C, = Con.; B, D = Cu. 9 24 24 45° 45° None 24 24 None 24-5 24-28 24-7 16 24 16 16 24 14 None None None E = Al.; F = Ch.; Balance = Cu. A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al. A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu. A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con. A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con. D = Con.; Balance = Cu. A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con. 28-53 28-58 28-61 28-63 28-11 28-20 28-21 28-20 22 14 37 14 18 4 37 4 45° 45° 45° 45° 28-64 28-15 35 35 None 28-65 28-12 26 26 None 28-67 28-68 28-16 28-15 20 35 20 35 None 45° 19 19 8 2 2 8 8 2 2 4 10 10 14 14 19 4 4 J, L = Al.; K, M = Ch.; Balance = Cu. A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu. A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con. A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu. A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.; Balance = Cu. A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con.; Y, a = Ch.; b, d = Cu. U = Con.; Balance = Cu. T = Al.; U = Ch.; Balance = Cu. 52 Thermocouple contact arrangements Shell Size and Arrg. Similar to MS Arrg. Total Contacts 28-69 28-70 28-77 28-11 28-11 28-11 22 22 22 Contact Size 12 16 4 18 4 18 4 18 28-81 28-21 37 37 None 32-51 32-55 32-8 32-8 30 30 6 6 24 24 90° 125° M = Ch.; N = Al.; Balance = Cu. M, N = Ch.; O, P = Al.; Balance = Cu. 36-53 36-7 47 7 40 45° 36-56 36-10 48 48 None 36-57 36-58 36-61 36-62 36-82 36-8 36-15 36-15 36-10 36-52* 47 35 35 48 52 46 35 35 48 52 None None None None None u, v, w = Al.; x, y, z = Ch.; Balance = Cu. A, C, E, G, L, J, H, P, R, T, V, X Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Balance = Cu. W = Al.; f = Ch. Balance = Cu. H = Al.; G = Ch.; Balance = Cu. A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu. A, C, E, = Al.; B, D, F = Ch.; Balance = Cu. v, g = Ir.; p, y, c = Con. x = Ch.; Balance = Cu. 40-58 40-56* 85 85 None 40-59 40-77 40-56* 40-53* 85 60 85 60 None None 40-78 40-53* 60 60 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance = Con. B = Ch.; C = Con.; Balance = Cu. 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu. 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.; 43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu. 44-57 44-52 104 104 None A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con. 1 Pin Insert Rotation CW None None None Contact Material G = Al.; R = Ch.; Balance = Cu. A = Al.; B = Ch.; Balance = Cu. J = Con.; Balance = Cu. A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k = Ch.; Balance = Cu. * Amphenol arrangement 53