RT0W61210PNH

REVISIONS REV ECO - B1 MASTER KEYWAY 1 6. 2 ø DESCRIPTION - RELEASED DRAWING DATE BY APPR JUN-26-2014 BEN TOMMY 11/16-24 UNEF THREAD ECO-MATE,PLUG,SIZE 12,10POS,PIN. Ø23.6 TITLE: 32.1 Ref DWG NO: PART NUMBER KEY POS -40°C ~ 125°C N RT0W61210PNH RT0W61210PNH03 W RT0W61210PWH RT0W61210PWH03 X RT0W61210PXH RT0W61210PXH03 Y RT0W61210PYH RT0W61210PYH03 Z RT0W61210PZH RT0W61210PZH03 REV: -40°C ~ 105°C RT0W61210P*H* B1 SH: 1 SEE PART NUMBER CHART DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: BEN ITEM Amphenol DATE JUN-26-2014 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: ECO-MATE,PLUG, SIZE 12,10POS,PIN. CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: TYPE C- NONE DWG NO: REVISION RT0W61210P*H* SHEET 1 B1 OF 1 1 QUANTITY OF: NOTES：(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL： SHELL：ZINC ALLOY，NICKEL PLATED. INSERT：THERMOPLASTIC，UL94 V-0. COUPLING NUT：AL ALLOY，NICKEL PLATED. WAVE WASHER：STAINLESS STEEL. O-RING：NBR/SILICONE RUBBER. 2. SPECIFICATIONS： 2.1 RATED CURRENT： 2.1.1 STAMPED CONTACT 5A (MAX). 2.1.2 MACHINED CONTACT 7.5A (MAX). 2.2 RATED VOLTAGE：150V（AC/DC）. 2.3 OPERATING TEMPERATURE：SEE CHART. 2.4 DIELECTRIC WITHSTANDINGVOLTAGE：LESS THAN 2 MILLIAMPS CURRENT LEAKAGE@1500 VOLTS AC. 2.5 INSULATION RESISTANCE：5000 MEGOHMS MIN. 2.6 IP--CLASS：IP67. 2.7 MATING CYCLES DURABILITY：500 CYCLES MIN. 2.8 ROHS COMPLIANT. 3. SUITABLE CONTACTS ：20# CONTACTS. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ecomate® RM/RSSM/Aquarius™ - Contact Size 20 Options Crimp Contacts, Machined Part Number Male Female Crimp Contacts, Stamped & Formed AWG Wire Range (mm²) Plating Part Number Male Female AWG Wire Range (mm²) Plating Gold Flash MP20W23F MS20W23F 22-20 0.34-0.50 Gold Flash SP20W2F SS20W2F 22-20 0.34-0.50 MP20W23G5 MS20W23G5 22-20 0.34-0.50 Gold 5µ” SP20W2G5 SS20W2G5 22-20 0.34-0.50 Gold 5µ” MP20W23G10 MS20W23G10 22-20 0.34-0.50 Gold 10µ” SP20W2G10 SS20W2G10 22-20 0.34-0.50 Gold 10µ” MP20W23G15 MS20W23G15 22-20 0.34-0.50 Gold 15µ” SP20W2G15 SS20W2G15 22-20 0.34-0.50 Gold 15µ” MP20W23G30 MS20W23G30 22-20 0.34-0.50 Gold 30µ” SP20W2G30 SS20W2G30 22-20 0.34-0.50 Gold 30µ” Gold Flash MP24W23F MS24W23F 26-24 0.13-0.25 Gold Flash SP24W2F SS24W2F 26-24 0.14-0.25 MP24W23G5 MS24W23G5 26-24 0.13-0.25 Gold 5µ” SP24W2G5 SS24W2G5 26-24 0.14-0.25 Gold 5µ” MP24W23G10 MS24W23G10 26-24 0.13-0.25 Gold 10µ” SP24W2G10 SS24W2G10 26-24 0.14-0.25 Gold 10µ” MP24W23G15 MS24W23G15 26-24 0.13-0.25 Gold 15µ” SP24W2G15 SS24W2G15 26-24 0.14-0.25 Gold 15µ” MP24W23G30 MS24W23G30 26-24 0.13-0.25 Gold 30µ” SP24W2G30 SS24W2G30 26-24 0.14-0.25 Gold 30µ” MP28W23F MS28W23F 30-28 0.05-0.08 Gold Flash SP28W2F SS28W2F 30-28 0.05-0.08 Gold Flash MP28W23G5 MS28W23G5 30-28 0.05-0.08 Gold 5µ” SP28W2G5 SS28W2G5 30-28 0.05-0.08 Gold 5µ” MP28W23G10 MS28W23G10 30-28 0.05-0.08 Gold 10µ” SP28W2G10 SS28W2G10 30-28 0.05-0.08 Gold 10µ” MP28W23G15 MS28W23G15 30-28 0.05-0.08 Gold 15µ” SP28W2G15 SS28W2G15 30-28 0.05-0.08 Gold 15µ” MP28W23G30 MS28W23G30 30-28 0.05-0.08 Gold 30µ” SP28W2G30 SS28W2G30 30-28 0.05-0.08 Gold 30µ” Tooling, Machined Part Number QXRT20 Description Tooling, Stamped & Formed Part Number Contact Extraction Tool, #20 (Ø 1.0) Contact QXRT20 Description Contact Extraction Tool, #20 (Ø 1.0) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3958 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die for Stamped & Formed Contact Plating Options, All Symbol Misc Tooling, All Plating Part Number Description CA-4020-59 Sealing Plug, Size 16 & 20 T Tin Plated (for Stamped & Formed Contacts) S Silver Plated 5Um (for Machined Contacts) F Gold Plated Standard Quantity Order Options G5 Gold Plated (Thickness 5µ”) Machined Stamped & Formed G10 Gold Plated (Thickness 10µ”) Bulk Package, 500 Pieces Reel, 3000 Pieces G15 Gold Plated (Thickness 15µ”) G30 Gold Plated (Thickness 30µ”) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021