AP1601M10A

AP1601 Step-Up DC/DC Converter Features -A Guaranteed Start-Up from less than 0.9 V. -High Efficiency. -Low Quiescent Current. -Less Number of External Components needed. -Low Ripple and Low Noise. -Space Saving Packages: MSOP-8L and MSOP-10L. General Description The AP1601 is a high efficiency step-up DC/DC converter for applications using 1 to 4 NiMH battery cells. Only three external components are required to deliver a fixed output voltage of 3.3V or 5V. The AP1601 starts up from less than 0.9V input with 1mA load. Pulse Frequency Modulation scheme brings optimized performance for applications with light output loading and low input voltages. The output ripple and noise are lower compared with the circuits operating in PSM mode. The PFM control circuit operating in 100KHz (max.) switching rate results in smaller passive components. The space saving MSOP packages make the AP1601 an ideal choice of DC/DC converter for space conscious applications, like pagers, electronic cameras, and wireless microphones. Applications -Pagers. -Cameras. -Wireless Microphones. -Pocket Organizers. -Battery Backup Suppliers. -Portable Instruments. Pin Assignments Pin Descriptions Name Description Use a resistor network to set the output voltage from +2.0V to +5.5V. If FB=Vout, Vout=3.3V fix voltage FB=GND, Vout=5V fix voltage Low-Battery Comparator Input. Internally set to trip at +1.30V. Open-Drain Low-Battery Comparator Output. Connect LBO to OUT through a 100kΩ resistor. Output is low when VLBI is 80% of VOUT) for operating mode. Drive low (