X0060L7575AHF

X0060L7575AHF Rev D Ultra Low Profile 0603 RF Crossover Description: The (patent pending) is an ultra-small low profile crossover that enables the transition of two intersecting RF traces in an easy to use industry standard SMT package. The 0603 crossover is ideal for any critical applications where layout and available space are a premium and resorting to addition PWB layers and larger overall footprints are unacceptable. With low insertion loss and high isolation packaged with cost in mind, this novel component delivers. The X0060L7575AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. Features: • 0 – 2500 MHz. • 0.7mm Height Profile • 75 Ohm RF-RF Crossover • All Wireless Frequencies • Low Insertion Loss • High Isolation • Surface Mountable • Tape & Reel • Non-conductive Surface • RoHS Compliant • Halogen Free ROOM (25°C) Parameter Frequency Port Impedance Return Loss Insertion Loss Isolation (cross-talk) 0 – 700 MHz 700 - 1700 MHz 1700 - 2500 MHz Power Handling Operating Temperature Min. Typ. 0 19 44 40 38 -55 75 21 0.1 Max Unit 2500 0.15 MHz Ω dB dB 2 +85 dB dB dB Watts ºC 52 47 43 Outline Drawing: 1 X0060L7575AHF Rev D Typical Performance: 500 MHz to 3000 MHz S12 Return Loss 0 0 -3 -0.1 -6 -0.2 -9 -0.3 -12 -0.4 [dB] [dB] -15 -18 -0.5 -21 -0.6 -24 -0.7 -27 Frequency [MHz] 3000 2500 2000 1500 1000 3000 2500 2000 1500 -1 1000 -0.9 -36 500 -33 500 -0.8 -30 Frequency [MHz] Isolation 0 -5 -10 -15 [dB] -20 -25 -30 -35 -40 -45 3000 2500 2000 1500 1000 500 -50 Frequency [MHz] 2 X0060L7575AHF Rev D Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Solder Resist 3x Transmission lines 12x .04 Plated thru holes to ground 6x .31 3x .21 12x .04 PART ORIENTATION TOP DOWN 6x .36 4x .14 3 X0060L7575AHF Rev D Packaging and Ordering Information: Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 .81 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .25 Contact us: rf&s_support@ttm.com 4