AOZ8221NI-05L

One-line Bi-directional TVS Diode AOZ8221 General Description The AOZ8221 is a one-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and ESD. This device incorporates one TVS diode in an ultra-small SOD523 package. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). The AOZ8221 comes in an RoHS compliant SOD523 package and is rated over a -40°C to +85°C ambient temperature range. The ultra-small 1.6 x 0.8 x 0.6mm SOD523 package makes it ideal for applications where PCB space is a premium. The small size and high ESD protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and ESD. Features ● ESD protection for high-speed data lines: – Exceeds: IEC 61000-4-2 (ESD) ±24kV (air), ±24kV (contact) – Human Body Model (HBM) ±30kV ● ● ● ● ● Small package saves board space Low insertion loss Low clamping voltage Low operating voltage: 5.0V Pb-free device Applications ● ● ● ● ● ● Portable handheld devices Keypads, data lines, buttons Notebook computers Digital Cameras Portable GPS MP3 players Typical Application Signal Line Pin Configuration Bidirection Protection of Single Line Rev. 1.7 January 2009 www.aosmd.com Page 1 of 6 AOZ8221 Ordering Information Part Number AOZ8221NI-05L Ambient Temperature Range -40°C to +85°C Package SOD523 Environmental RoHS Compliant Green Product All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards. Parts marked as Green Products (with “L” suffix) use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter VP – VN Peak Pulse Current (IPP), tP = 8/20µs Storage Temperature (TS) ESD Rating per IEC61000-4-2, ESD Rating per IEC61000-4-2, ESD Rating per Human Body Contact(1) Air(1) 5V 5A Rating -65°C to +150°C ±24kV ±24kV ±30kV Model(2) Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ. Maximum Operating Ratings Parameter Junction Temperature (TJ) Rating -40°C to +85°C Electrical Characteristics TA = 25°C unless otherwise specified. Symbol IPP VCL VRWM IR VBR Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Symbol IT IF VF Ppk CJ Test Current Parameter Forward Current Forward Voltage @ IF Peak Power Dissipation Max. Capacitance @ VR = 0 and f = 1MHz Electrical Characteristics TA = 25°C unless otherwise noted, VF = 0.9V Max. @ IF = 10mA for all types Device AOZ8221NI-05L Device Marking H VRWM (V) Max. 5.0 VBR (V) Max. 6.0 IR (µA) Max. 0.1 VF (V) Typ. 1.0 VCL Max. IPP = 1A 11.00 IPP = 5A 13.00 IPP = 12A 16.00 CJ (pF) Typ. 13 Rev. 1.7 January 2009 www.aosmd.com Page 2 of 6 AOZ8221 Typical Performance Characteristics Clamping Voltage vs. Peak Pulse Current 20 Clamping Voltage, VCL (V) 18 Insertion Loss (dB) 16 14 12 10 8 (tperiod = 100ns, tr = 1ns) 5 0 -5 -10 -15 -20 -25 I/O – Gnd Insertion Loss (S21) vs. Frequency (Vp = 3.3V) 0 2 4 6 8 10 12 1 10 100 Frequency (MHz) 1000 10000 Peak Pulse Current, IPP (A) Capacitance vs. Reverse Bias 16 14 Input Capacitance (pF) 12 10 8 6 4 2 0 1.0 2.0 3.0 4.0 5.0 Input Voltage (V) Rev. 1.7 January 2009 www.aosmd.com Page 3 of 6 AOZ8221 Package Dimensions, SOD523 E1 L b D B E A aaa CAB TOP VIEW BOTTOM VIEW View ‘C’ A C Seating Plane A1 SIDE VIEW c VIEW ‘C’ RECOMMENDED LAND PATTERN 0.40 1.40 Dimensions in millimeters Symbols A A1 b c D E E1 L aaa Min. 0.50 0.00 0.25 0.07 0.70 1.10 1.50 0.25 Nom. 0.60 — 0.30 — 0.80 1.20 1.60 0.30 0.08 Max. 0.70 0.05 0.35 0.20 0.90 1.30 1.70 0.40 Dimensions in inches Symbols A A1 b c D E E1 L aaa Min. 0.020 0.00 0.010 0.003 0.028 0.043 0.059 0.010 Nom. 0.024 — 0.012 — 0.031 0.047 0.063 0.012 0.003 Max. 0.028 0.002 0.014 0.008 0.035 0.051 0.067 0.016 0.40 UNIT: mm Notes: 1. All Dimensions are in millimeters. 2. Dimensions are inclusive of plating. 3. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. 4. The cathode mark is optional. 5. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 3 mils each. Rev. 1.7 January 2009 www.aosmd.com Page 4 of 6 AOZ8221 Tape and Reel Dimensions, SOD523 Tape B - B’ Section K0 B1 Max. 2° B0 P0 T A0 A1 Max 2° E2 E E3 P1 P2 D0 D1 E1 UNIT: mm A - A’ Section T 0.18 ±0.1 B0 1.95 ±0.1 B1 1.4 ±0.1 A0 0.9 ±0.1 A1 0.39 ±0.1 K0 0.73 ±0.1 D0 ø1.5 ±0.1 D1 ø0.50 ±0.05 E 8.0 ±0.2 E1 1.75 ±0.1 E2 3.5 ±0.05 E3 2.75 P0 2.0 ±0.1 Feeding Direction P1 4.0 ±0.1 P2 2.0 ±0.05 Package SOD523 Reel W1 S G N K V H R Arbor Hole Detail A Back View W Section: B - B’ UNIT: mm Tape Size 8mm Reel Size ø180 M ø180.00 ±0.5 N ø60.50 W 9.0 ±0.30 W1 11.40 ±1.00 H ø13.00 +0.50/-2.0 K 10.60 S 2.00 ±0.50 G ø9.00 R 5.00 V 18.00 Leader/Trailer and Orientation Empty Cathode Trailer Tape 300mm min. Rev. 1.7 January 2009 Components Tape Orientation in Pocket Leader Tape 500mm min. Page 5 of 6 www.aosmd.com AOZ8221 Part Marking HM Product Number Code Date Code This datasheet contains preliminary data; supplementary data may be published at a later date. Alpha & Omega Semiconductor reserves the right to make changes at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Rev. 1.7 January 2009 www.aosmd.com Page 6 of 6