S393

Semiconductor S393 Dual Voltage Comparator Description The S393 consists of two independent voltage comparators designed to operate from a single power supply over a wide voltage range. Features • • • • • • • • Single Supply Operation: 2V to 36V. Dual Supply Operation: ±1V to ±18V. Allow Comparison of Voltages Near Ground Potential. Low Current Drain 800uA Typ. Compatible with all Forms of Logic. Low Input Bias Current: 25nA Typ. Low Input Offset Current: ±5nA Typ. Low Offset Voltage: ±1mV Typ. Applications • Transducer amplifier • DC gain blocks • Conventional operational amplifiers Ordering Information Type NO. S393 Marking S393 Package Code SOP-8 Outline Dimensions unit : mm Block Diagram B A A KSI-8003-002 1 S393 Absolute maximum ratings Characteristic Supply voltage Differential input voltage Input voltage Power Dissipation Operating temperature Storage temperature Symbol VCC VIND VIN PD Topr Tstg Ratings 36 or ±18 36 -0.3 ~ +36 300 -40 ~ +85 -65 ~ 150 Unit V V V mW °C °C Electrical Characteristics (Unless otherwise specified. VCC = 5V and –40 °C ≤ Ta ≤ +85 °C) Characteristic Input Offset Voltage Input Offset Current Input Bias Current Input Common Mode Voltage Range Supply Current Large Signal Voltage Gain Output Voltage (‘L’ Level) Response Time Output Sink Current Symbol VIOS IIOS IIB VICR ICC AV Test Condition VO = 1.4V Rs = 0Ω VCC = 30V, RL = ∞, All Channel VCC = 15V RL = 15 KΩ VIN+= 0V, VIN-= 1V ISINK≤ 4mA RL = 5.1 KΩ, CL = 15pF VO ≤ 1.5V VIN+ = 0V, VIN- = 1V V O = 5V VIN+ = 1V, VIN- = 0V Min. Typ. Max. 0 50 ±1 ±5 Unit mV nA nA V mA V/mV ±5 25 200 ±50 250 VCC –1.5 2.5 - VSAT tRES ISINK 6 150 1.3 16 400 - mV uS mA Output Leakage Current ILeak - 0.1 - nA KSI-8003-002 2 S393 Electrical Characteristic Curves Fig. 1 VCC-ICC Fig. 2 VCC-IIB Fig. 3 VOL-ISINK Fig. 4 PD-Ta Fig. 5 VIN,VOUT-trsp Fig. 6 VIN,VOUT-trsp Ω Ω KSI-8003-002 3 S393 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSI-8003-002 4