SPG1316E-H

Semiconductor SPG1316E-H High Brightness Chip LED Features • • • • • 1.6mm(L)×0.8mm(W) small size surface mount type Thin package of 0.55mm(H) thickness Transparent clear lens optic Low power consumption type chip LED Emitting light green (530nm) • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) Applications • • • • LCD backlighting Keypad backlighting Symbol backlighting Front panel indicator lamp Outline Dimensions unit : mm KSD-O8G011-001 1 SPG1316E-H Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Operating temperature range Storage temperature range 2 1 (Ta=25oC) Symbol PD IF IFP Topr Tstg Rating 64 20 50 -25∼80 -30∼100 Unit mW mA mA ℃ ℃ 240℃ for 10 seconds * Soldering temperature Tsol *1. Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150℃ to 185℃ within 120 seconds soldering 240℃ within 10 seconds Gradual cooling (Avoid quenching) Temp (℃) 240 Peak Temp max. 240℃ Preheating area 150~185℃, 90±30sec 185 150 max. 3℃/sec max. 4℃/sec Time from 25℃ to Peak Temperature max. 6min 0 60 150 180 240 Time (sec) max. -6℃/sec max. 10sec Solder area 220℃, max. 60sec 25 Electrical / Optical Characteristics Characteristic Forward voltage (Ta=25oC) Symbol VF IV Test Condition IF= 5mA IF= 5mA IF= 5mA IF= 5mA Min 2.6 33 524 - Typ 35 ±65 ±70 Max 3.2 95 536 - Unit V mcd nm nm deg *4Luminous intensity Peak wavelength Spectrum bandwidth λP ∆λ θ1/2 X Y *3Half angle IF= 5mA KSD-O8G011-001 2 SPG1316E-H *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% (The test result of IF=5mA is only for reference) ● VF / IV / λP Grade Classification (Ta=25℃) Test Condition @IF = 5mA Forward Voltage [V] 2 : 2.6~2.8 Luminous Intensity [mcd] A : 33~43 c : 524~530 B : 43~56 3 : 2.8~3.0 C : 56~73 4 : 3.0~3.2 d : 530~536 D : 73~95 Peak Wavelength [nm] (Do not use to combine grade classification. It must be used separately grade classification) KSD-O8G011-001 3 SPG1316E-H Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Forward Current IF [mA] Forward Voltage VF [V] Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Relative Intensity [%] Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5-1 Radiation Diagram(X) Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] Relative Luminous Intensity Iv [%] KSD-O8G011-001 4 SPG1316E-H The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O8G011-001 5