ACMD-6207-TR1

ACMD-6207 LTE Band 7 Duplexer with Balanced Rx Port Data Sheet Description Features The Avago ACMD-6207 is a highly miniaturized duplexer designed for use in LTE Band 7 (2500 – 2570 MHz UL, 2620 – 2690 MHz DL) handsets and mobile data terminals. • Miniature Size - 1.6 x 2.0 mm size - 0.9 mm height - Standard 1.6 x 2.0 mm PCB footprint Low Insertion Loss in the Tx channel minimizes current drain from the power amplifier, while low Rx channel Insertion Loss improves receiver sensitivity. The Rx port is balanced to preserve CMR and simplify the interface to baseband chipsets. The ACMD-6207 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. The ACMD-6207 is designed with Avago Technologies’ innovative Film Bulk Acoustic Resonator (FBAR) technology, which makes possible ultra-small, high-Q filters at a fraction of their usual size. The excellent power handling capability of FBAR bulk-mode resonators supports the high output power levels used in mobile communications applications, while adding virtually no distortion. The ACMD-6207 also utilizes Avago Technologies’ advanced Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled into a molded chip-on-board module with an overall size of only 1.6 x 2.0 mm and maximum height of 0.90 mm. The ACMD-6207 is compatible with standard 1.6 x 2.0 mm duplexer PCB footprints. Functional Block Diagram Ant Port 3 (Pin 4) Rx (Balanced) Port 2 (Pins 6, 7) Tx Port 1 (Pin 1) • Balanced Rx Port, 100 Ω • No external matching required • High Isolation • High Power Rating - +31 dBm Abs Max Tx Power • Environmental - RoHS Compliant - Halogen free - TBBPA Free Specifications • Rx Band Performance, 2620-2690 MHz, – 20 to +85°C - Insertion Loss: 3.0 dB Max - Rx Noise Blocking: 50 dB Min • Tx Band Performance, 2500-2570 MHz, – 20 to +85°C - Insertion Loss: 3.0 dB Max - Tx Interferer Blocking: 55 dB Min Applications Handsets or data terminals operating in the Band 25 frequency range. ACMD-6125 Electrical Specifications [2], Z0=50 Ω, TC [1] as indicated. – 20°C Symbol Parameter Units Min Max +25°C Min Typ [3] +85°C Max Min Max Antenna Port to Receive Port ZRx Impedance of Balanced Rx Port, Real Part Ohms 100 S23 Insertion Loss in Receive Band 2620 – 2690 MHz dB 3.0 1.8 3.0 3.0 DS23 Amplitude Imbalance in Receive Band 2620 – 2690 MHz dB ±1.8 ±0.6 ±1.8 ±1.8 DS23Ø Phase Imbalance in Receive Band 2620 – 2690 MHz deg ±8 ±5.1 ±8 ±8 S23 Attenuation in Transmit Band 2500 – 2570 MHz dB 45 45 63 45 S23 Attenuation, 50 – 2380 MHz dB 40 40 63 40 S23 Attenuation, 2380 – 2450 MHz (Wi-Fi Low) dB 40 40 55 40 S23 Attenuation, 2450 – 2484 MHz (Wi-Fi High) dB 35 35 62 35 S23 Attenuation, 2775 – 8500 MHz dB 18 18 48 18 S22 Return Loss (SWR) of Rx Port in Rx Band (100 W), 2620 – 2690 MHz dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) S33 Return Loss (SWR) of Ant Port in Rx Band 2620 – 2690 MHz dB 9 (2.1) 9 19 (1.3) (2.1) 9 (2.1) 2.1 1.4 3.0 2.4 Transmit Port to Antenna Port S31 Insertion Loss in Transmit Band 2500 – 2510 MHz 2510 – 2570 MHz dB S31 Attenuation in Receive Band 2620 – 2690 MHz dB 45 45 60 45 S31 Attenuation, 50 – 1565 MHz dB 45 45 61 45 S31 Attenuation 1565 – 1574 MHz (GPS Low Band) dB 45 45 48 45 S31 Attenuation, 1574 – 1577 MHz (GPS L1 Band) dB 45 45 48 45 S31 Attenuation, 1577 – 1585 MHz (Wideband GPS High) dB 45 45 48 45 S31 Attenuation, 1597 – 1607 MHz (GLONASS) dB 45 45 47 45 S31 Attenuation, 1607 – 1680 MHz dB 40 40 47 40 S31 Attenuation, 1805 – 1880 MHz (Band 3 Rx) dB 40 40 47 40 S31 Attenuation, 2110 – 2170 MHz (Band 1 Rx) dB 40 40 56 40 S31 Attenuation, 2402.5 – 2461.5 MHz (Wi-Fi Bands 1 – 9) dB 40 40 48 40 S31 Attenuation, 2447.5 – 2481.5 MHz (Wi-Fi Bands 10 – 13) dB 35 35 46 35 S31 Attenuation in Tx 2nd Harmonic Band 5000 – 5140 MHz dB 35 35 47 35 S31 Attenuation, 5150 – 5850 MHz dB 20 20 42 20 S31 Attenuation, 7500 – 7710 MHz dB 25 25 27 25 S11 Return Loss (SWR) of Tx Port in Tx Band 2500 – 2570 MHz dB 10 (1.9) 10 20 (1.2) (1.9) 10 (1.9) S33 Return Loss (SWR) of Ant Port in Tx Band 2500 – 2570 MHz dB 10 (1.9) 10 20 (1.2) (1.9) 10 (1.9) 3.0 2.4 3.0 2.4 Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band 2620 – 2690 MHz dB 50 50 60 50 S21 Tx-Rx Differential Isolation in Transmit Band, 2500 – 2570 MHz dB 55 55 61 55 S21 Tx-Rx Common Mode Isolation in Transmit Band, 2500 – 2570 MHz dB 55 55 60 55 Notes: 1. TC is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +27 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time. 4. Integrated Insertion Loss over any 1.25 MHz channel within the band. 2 Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C –65 to +125 Maximum RF Input Power to Tx Port dBm +31 Parameter Unit Value Operating temperature, Tc [3] , Tx Power ≤ 29 dBm, CW °C –40 to +100 Operating temperature, Tc [3] , Tx Power ≤ 30 dBm, CW °C –40 to +85 Maximum Recommended Operating Conditions [2] Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. 3. TC is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board. 3 ACMD-6207 Typical Performance at Tc = 25°, Rx Z0 = 100 Ω, all other Z0 = 50 Ω 0 0 -0.5 -1.0 -1.0 Insertion Loss (dB) Insertion Loss (dB) -0.5 -1.5 -1.5 -2.0 -2.0 -2.5 -3.0 2500 -2.5 2510 2520 2530 2540 Frequency (MHz) 2550 2560 2570 Figure 1. Tx–Ant Insertion Loss. -3.0 2620 2630 2640 2650 2660 Frequency (MHz) 2670 2680 2690 Figure 2. Ant–Rx Insertion Loss. 0 0 -10 -5 -20 Attenuation (dB) -10 Return Loss (dB) -30 -40 -15 -50 -20 -60 -25 -70 -80 2400 2450 2500 2550 2600 2650 Frequency (MHz) 2700 2750 2800 Figure 3. Tx Rejection in Rx Band and Rx Rejection in Tx Band. -30 2400 2450 2500 2550 2600 2650 Frequency (MHz) 2700 2750 2800 2700 2750 2800 Figure 4. Tx and Rx Port Return Loss. 0 0 -10 -5 -20 Return Loss (dB) Attenuation (dB) -10 -30 -40 -15 -50 -20 -60 -25 -70 -80 2400 2450 2500 Figure 5. Tx–Rx Isolation. 4 2550 2600 2650 Frequency (MHz) 2700 2750 2800 -30 2400 2450 2500 2550 2600 2650 Frequency (MHz) Figure 6. Antenna Port Return Loss. ACMD-6207 Typical Performance at Tc = 25°, Rx Z0 = 100 Ω, all other Z0 = 50 Ω 0 0 -10 -20 -20 Attenuation (dB) Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 -80 2000 4000 6000 Frequency (MHz) 8000 Figure 7. Tx–Ant and Ant–Rx Wideband Insertion Loss, 100 – 8500 MHz -80 1560 1610 -20 2000 2500 Attenuation (dB) -20 Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 200 400 600 800 1000 Frequency (MHz) 1200 1400 Figure 9. Tx–Ant Low Frequency Rejection, 100 – 1600 MHz 1600 -80 500 1000 1500 Frequency (MHz) Figure 10. Ant–Rx Low Frequency Rejection, 100 – 2500 MHz 0 0 -10 -20 -20 Attenuation (dB) Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 3000 4000 5000 6000 Frequency (MHz) Figure 11. Ant–Rx Rejection, 2775 – 8500. 5 1600 0 -10 -80 1580 1590 Frequency (MHz) Figure 8. Tx–Ant Rejection in GPS/GLONASS Bands. 0 -80 1570 7000 8000 -80 1610 1620 1630 1640 1650 Frequency (MHz) Figure 12. Tx–Ant Rejection, 1607 – 1680 MHz 1660 1670 1680 ACMD-6207 Typical Performance at Tc = 25°, Rx Z0 = 100 Ω, all other Z0 = 50 Ω 0 0 -10 -20 -20 Attenuation (dB) Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 -80 1810 1820 1830 1840 1850 Frequency (MHz) 1860 1870 1880 Figure 13. Tx–Ant Rejection, 1805 – 1880 MHz -80 2110 2130 2140 2150 Frequency (MHz) 2160 2170 Figure 14. Tx–Ant Rejection, 2110 – 2170 MHz 0 0 -10 -20 -20 Attenuation (dB) Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 -80 2400 2420 2440 Frequency (MHz) 2460 2480 Figure 15. Tx–Ant Rejection in Wi-Fi Bands, 2400 – 2482 MHz -80 5000 5040 5060 5080 5100 Frequency (MHz) 5120 5140 0 -10 -20 -20 Attenuation (dB) Attenuation (dB) -10 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 -80 5020 Figure 16. Tx–Ant Rejection at Tx 2nd Harmonic, 5000 – 5140 MHz 0 5200 5300 5400 5500 5600 Frequency (MHz) Figure 17. Tx–Ant Rejection, 5150 – 5850 MHz 6 2120 5700 5800 -80 7500 7550 7600 7650 Frequency (MHz) Figure 18. Tx–Ant Rejection, 7500 – 7710 MHz 7700 ACMD-6207 Typical Performance at Tc = 25°, Rx Z0 = 100 Ω, all other Z0 = 50 Ω 0.8 1 0.8 1.5 0.6 1 1.5 0.6 2 2 0.4 0.4 3 3 4 0.2 5 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 4 0.2 5 10 20 50 10 2050 -50 -20 -10 -0.2 -5 -4 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 -0.2 -5 -4 -3 -3 -0.4 -0.4 -2 -0.6 -0.8 -2 -0.6 -1.5 -1 -0.8 Figure 19. Tx Port Impedance in Tx Band. 0.8 1 -1.5 -1 Figure 20. Rx Port Impedance in Rx Band (Zo = 100 ohms). 0.8 1.5 0.6 1 1.5 0.6 2 2 0.4 0.4 3 3 4 4 0.2 5 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 0.2 5 10 20 50 10 2050 -50 -20 -10 -0.2 -5 -4 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 -5 -4 -3 -0.4 -2 -0.6 -0.8 -1 Figure 21. Ant Port Impedance in Tx Band. -1.5 10 20 50 10 2050 -50 -20 -10 -0.2 -3 -0.4 7 10 20 50 10 2050 -50 -20 -10 -2 -0.6 -0.8 -1 Figure 22. Ant Port Impedance in Rx Band. -1.5 1.850 2.00 ±0.075 ANT (GND) RX-A 1.60 ±0.075 GND (9) (2) (6) TX (1) GND PIN 1 MARK (8) 0.33 (3X) TOP VIEW SIDE VIEW Notes: 1. Dimensions in millimeters 2. Tolerance, unless otherwise noted: X.XX ± 0.05 mm X.XXX ± 0.025 mm 3. Dimensions nominal unless otherwise noted 4. Angles 45° nominal 5. Contact areas are gold plated BOTTOM VIEW Pin Connections: 1 Tx 4 Ant 6 Rx-B 7 Rx-A 2, 3, 5, 8, 9 GND 0.30 (REF) 0.30 0.60 (REF) 0.15 X 45° (ALIGNED TO PIN 1) 0.08 (0.13 MAX) 0.08 (0.13 MAX) 0.33 PADS 1-8 CENTER PAD 9 Figure 24. Pad Detail PIN 1 MARK GND Tx (Pin 1) GND MYW XXXX Rx-A (Pin 7) Rx-B (Pin 6) (GND) GND GND ANT (Pin 4) Figure 25. Product Marking and Pin Orientation (7) 0.60 Figure 23. Package Outline Drawing 8 (5) 0.725 GND RX-B (4) (3) 1.4 50 GND 0.075 ±0.050 ALL AROUND 0.925 0.825 ±0.075 “A” = Avago Technologies M = ACMD-6207 Y = Year, last digit W = Work Week * XXXX = Lot Number *Refer to Appendix A for Work Week Cross Reference 0.30 (3X) Figure 26. PCB Layout. Figure 27. ACMD-6207 Superposed on PCB Pattern.  A circuit board layout using the principles illustrated in the figure above is recommended to optimize performance of the ACMD-6207. It is important to maximize isolation between the Tx and Rx ports. High isolation is achieved by: (1) maintaining a continuous ground plane around the I/O connections and duplexer mounting area, (2) surrounding the I/O ports with sufficient ground vias to enclose the connections in a “Faraday cage”, and (3) preferably transitioning the balanced Rx traces to the 3rd metal layer. The ground vias under the ACMD-6207 mounting area are also needed to provide adequate heat sinking for the device. 0.600 0.330 (3X) 0.300 (3X) 1.450 1.850 Notes: 1. Dimensions in mm Figure 28. PCB Land Print. 9 0.662 0.395 0.614 0.100 X 45° (X2) 0.530 0.200 0.700 0.435 * 0.310 0.145 * 0.575 0.575 FOOTPRINT CENTER Notes: 1. Dimensions in mm 0.760 0.760 Figure 29. PCB Detail, Metal Dimensions. The transmission line dimensions shown are designed to achieve an impedance of 50 ohms for a 75µm thick PCB layer with a dielectric constant of 3.4. If other PCB materials or thicknesses are used, the two dimensions indicated with an “*” (line width and spacing) can be adjusted to retain a Zo of 50 ohms. 10 1.480 1.130 0.840 1X5 VIA ARRAY 0.310 PITCH 0.530 0.250 0.525 0.400 0.155 1.150 1X4 VIA ARRAY 0.310 PITCH 1.490 1.840 Notes: 1. Dimensions in mm 2. Via pattern symmetrical about vertical center line 3. All vias Ø 0.25 mm, filled 0.400 Figure 30. PCB Detail, Dimensions for Symmetrical Via Pattern. 0.525 0.400 0.838 0.990 0.530 0.840 Notes: 1. Dimensions in mm 2. All vias Ø 0.25 mm, filled 1.130 1.480 Figure 31. PCB Detail, Dimensions for Asymmetrical Via Pattern. 11 0.840 1.130 1.480 1.150 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 ø 1.50 + 0.10 1.75 ± 0.10 8.00 3.50 ± 0.05 +0.30 −0.10 ø 0.60 +0.05 −0.10 0.254 ± 0.02 3° MAX 5° MAX 1.12 ± 0.05 1.80 ± 0.05 A. 2.16 ± 0.05 K. B. Figure 32. SMD Tape Packing SPROCKET HOLES PACKAGE PIN 1 ORIENTATION MYW XXX X MYW XXX X POCKET CAVITY Figure 33. Orientation in Tape 12 TAPE WIDTH FRONT VIEW 1.5 min. 13.0 ± 0.2 21.0 ± 0.8 NOTES: 1. Reel shall be labeled with the following information (as a minimum). a. manufacturers name or symbol b. Avago Technologies part number c. purchase order number d. date code e. quantity of units 2. A certificate of compliance (c of c) shall be issued and accompany each shipment of product. 3. Reel must not be made with or contain ozone depleting materials. 4. All dimensions in millimeters (mm) BACK VIEW Shading indicates thru slots 18.4 max. 178 +0.4 -0.2 50 min. 25 min wide (ref) Slot for carrier tape insertion for attachment to reel hub (2 places 180° apart) 12.4 +2.0 -0.0 Figure 34. SMT Reel Drawing 13 Package Moisture Sensitivity Feature Moisture Sensitivity Level (MSL) at 260°C Test Method Performance JESD22-A113D Level 3 300 250 Temperature, °C 200 150 100 50 Tested profile shown. 0 0 50 100 150 200 250 Time, seconds Figure 35. Verified SMT Solder Profile Ordering Information Part Number No. of Devices Container ACMD-6207-BLK 100 Tape Strip or Anti-static Bag ACMD-6207-TR1 3000 178 mm (7-inch) Reel 14 300 PROFILE.GRF PROFILE. WMF 6 February 2003 R. Waugh Appendix A – Package Marking Cross Reference Marking “W” Work Week Marking “W” (cont) Work Week (cont) 1 1 S 27 2 2 T 28 3 3 U 29 4 4 V 30 5 5 W 31 6 6 X 32 7 7 Y 33 8 8 Z 34 9 9 a 35 A 10 b 36 B 11 c 37 C 12 d 38 D 13 e 39 E 14 f 40 F 15 g 41 G 16 m 42 H 17 n 43 J 18 q 44 K 19 r 45 L 20 t 46 M 21 < 47 N 22 > 48 O 23 / 49 P 24 \ 50 Q 25 ( 51 R 26 ) 52 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-4282EN - September 2, 2013