HEDM-5640

HEDM-55xx/560x & HEDS-55xx/56xx Quick Assembly Two and Three Channel Optical Encoders Data Sheet HEDM-55xx/560x HEDS-550x/554x, HEDS-560x/564x Description The HEDS-5500/5540, HEDS-5600/5640, HEDM-5500/5540 and HEDM-5600 are high performance, low cost, two and three channel optical incremental encoders. These encoders emphasize high reliability, high resolution, and easy assembly. Each encoder contains a lensed LED source, an integrated circuit with detectors and output circuitry, and a codewheel which rotates between the emitter and detector IC. The outputs of the HEDS-5500/5600 and HEDM-5500/ 5600 are two square waves in quadrature. The HEDS-5540/5640 and HEDM-5540 also have a third channel index output in addition to the two channel quadrature. This index output is a 90 electrical degree, high true index pulse which is generated once for each full rotation of the codewheel. The HEDS series utilizes metal codewheels, while the HEDM series utilizes a film codewheel allowing for resolutions to 1024 CPR. These encoders may be quickly and easily mounted to a motor. For larger diameter motors, the HEDM-5600, and HEDS-5600/5640 feature external mounting ears. The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers. Standard resolutions between 96 and 1024 counts per revolution are presently available. Consult local Avago sales representatives for other resolutions. Features • Two channel quadrature output with optional index pulse • Quick and easy assembly • No signal adjustment required • External mounting ears available • Low cost • Resolutions up to 1024 counts per revolution • Small size –40°C to 100°C operating temperature • T TL compatible • Single 5 V supply Applications The HEDS-5500, 5540, 5600, 5640, and the HEDM-5500, 5540,5600 provide motion detection at a low cost, making them ideal for high volume applications. Typical applications include printers, plotters, tape drives, positioning tables, and automatic handlers. Note: Avago Technologies encoders are not recommended for use in safety critical applications. Eg. ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed. ESD WARNING: NORMAL HANDLING PRECAUTIONS SHOULD BE TAKEN TO AVOID STATIC DISCHARGE. Package Dimensions HEDS-5500/5540, HEDM-5500/5540 *Note: For the HEDS-5500 and HEDM-5500, Pin #2 is a No Connect. For the HEDS-5540 and HEDM-5540, Pin #2 is CH. I, the index output. HEDS-5600/5640, HEDM-5600 *Note: For the HEDS-5600 and HEDM-5600, Pin #2 is a No Connect. For the HEDS-5640, Pin #2 is CH. I, the index output. 2 Theory of Operation The HEDS-5500, 5540, 5600, 5640, and HEDM-5500, 5540, 5600 translate the rotary motion of a shaft into either a two- or a three-channel digital output. As seen in the block diagram, these encoders contain a single Light Emitting Diode (LED) as its light source. The light is collimated into a parallel beam by means of a single polycarbonate lens located directly over the LED. Opposite the emitter is the integrated detector circuit. This IC consists of multiple sets of photodetectors and the signal processing circuitry necessary to produce the digital waveforms. The codewheel rotates between the emitter and detector, causing the light beam to be interrupted by the pattern of spaces and bars on the codewheel. The photodiodes which detect these interruptions are arranged in a pattern that corresponds to the radius and design of the codewheel. These detectors are also spaced such that a light period on one pair of detectors corresponds to a dark period on the adjacent pair of detectors. The photodiode outputs are then fed through the signal processing circuitry resulting in A, A, B and B (also I and I in the HEDS5540/5640 and HEDM-5540). Comparators receive these signals and produce the final outputs for channels A and B. Due to this integrated phasing technique, the digital output of channel A is in quadrature with that of channel B (90 degrees out of phase). In the HEDS-5540/5640 and HEDM-5540, the output of the comparator for I and I is sent to the index processing circuitry along with the outputs of channels A and B. The final output of channel I is an index pulse PO which is generated once for each full rotation of the codewheel. This output PO is a one state width (nominally 90 electrical degrees), high true index pulse which is coincident with the low states of channels A and B. Definitions Count (N): The number of bar and window pairs or counts per revolution (CPR) of the codewheel. One Cycle (C): 60 electrical degrees (°e), 1 bar and window pair. One Shaft Rotation: 60 mechanical degrees, N cycles. Position Error (∆Θ): The normalized angular difference between the actual shaft position and the position indicated by the encoder cycle count. Cycle Error (∆C): An indication of cycle uniformity. The differ¬ence between an observed shaft angle which gives rise to one electrical cycle, and the nominal angular increment of 1/N of a revolution. Pulse Width (P): The number of electrical degrees that an output is high during 1 cycle. This value is nominally 180°e or 1/2 cycle. Pulse Width Error ( ∆P): The deviation, in electrical degrees, of the pulse width from its ideal value of 180°e. State Width (S): The number of electrical degrees between a transition in the output of channel A and the neighbouring transition in the output of channel B. There are 4 states per cycle, each nominally 90°e. State Width Error ( ∆S): The deviation, in electrical degrees, of each state width from its ideal value of 90°e. Phase (φ): The number of electrical degrees between the center of the high state of channel A and the center of the high state of channel B. This value is nominally 90°e for quadrature output. Phase Error (∆φ): The deviation of the phase from its ideal value of 90°e. Block Diagram Note: Circuitry for CH I is only for HEDS-5540, 5640 and HEDM 5540 Three Channel Encoder  Absolute Maximum Ratings Parameter Storage Temperature, TS Operating Temperature, TA Supply Voltage, VCC Output Voltage, VO Output Current per Channel, IOUT Vibration Shaft Axial Play Shaft Eccentricity Plus Radial Play Velocity Acceleration HEDS-55XX/56XX -40°C to 100°C -40°C to 100°C -0.5 V to 7 V -0.5 V to VCC -1.0 mA to 5 mA 20 g, 5 to 1000 Hz ± 0.25 mm (± 0.010 in.) 0.1 mm (0.004 in.) TIR 0,000 RPM 250,000 rad/sec2 HEDM-550X/560X -40°C to +70°C -40°C to +70°C -0.5 V to 7 V -0.5 V to VCC -1.0 mA to 5 mA 20 g, 5 to 1000 Hz ± 0.175 mm (± 0.007 in.) 0.04 mm (0.0015 in.) TIR 0,000 RPM 250,000 rad/sec2 HEDM-5540 -40°C to 100°C -40°C to 100°C -0.5 V to 7 V -0.5 V to VCC -1.0 mA to 5 mA 20 g, 5 to 1000 Hz ± 0.175 mm (± 0.007 in.) 0.04 mm (0.0015 in.) TIR 0,000 RPM 250,000 rad/sec2 Direction of Rotation: When the codewheel rotates in the counter¬clockwise direction (as viewed from the encoder end of the motor), channel A will lead channel B. If the codewheel rotates in the clockwise direction, channel B will lead channel A. Index Pulse Width (PO): The number of electrical degrees that an index output is high during one full shaft rotation. This value is nominally 90°e or 1/4 cycle. Output Waveforms 4 Recommended Operating Conditions Parameter Temperature HEDS Series Temperature HEDM Series 5500/5600 5540 Supply Voltage Load Capacitance Count Frequency Shaft Perpendicularity Plus Axial Play (HEDS Series) Shaft Eccentricity Plus Radial Play (HEDS Series) Shaft Perpendicularity Plus Axial Play (HEDM Series) Shaft Eccentricity Plus Radial Play(HEDM Series) Sym. TA TA TA VCC CL f Min. -40 -40 -40 4.5 Typ. Max. 100 70 100 Units °C °C °C Volts pF kHz mm (in.) mm (in.) TIR mm (in.) Notes non-condensing atmosphere Ripple < 100 mVp-p 2.7 kΩ pull-up Velocity (rpm) x N/60 6.9 mm (0.27 in.) from mounting surface 6.9 mm (0.27 in.) from mounting surface 6.9 mm (0.27 in.) from mounting surface 5.0 5.5 100 100 ± 0.25 (±0.010) 0.04 (0.0015) ± 0.175 (±0.007) 0.04 (0.0015) mm (in.) 6.9 mm (0.27 in.) TIR from mounting surface Note: The module performance is guaranteed to 100 kHz but can operate at higher frequencies. 2.7 kΩ pull-up resistors required for HEDS5540/5640 and HEDM-5540. Encoding Characteristics Part No. HEDS-5500 HEDS-5600 (Two Channel) Description Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error Index Pulse Width CH.I rise after -40°C to +100°C CH.A or CH. B fall CH.I fall after -40°C to +100°C CH.A or CH. B rise Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error Index Pulse Width CH.I rise after -40°C to +100°C CH.A or CH. B fall CH.I fall after -40°C to +100°C CH.A or CH. B rise Sym. ∆P ∆S ∆Φ ∆Θ ∆C ∆P ∆S ∆Φ ∆Θ ∆C ∆P ∆S ∆Φ ∆Θ ∆C Po t1 t2 ∆P ∆S ∆Φ ∆Θ ∆C Po t1 t2 Min Typ.* 7 5 2 10  10 10 2 10  5 5 2 10  90 100 150 10 10 2 10 6 90 1000 00 Max. 45 45 20 40 5.5 45 45 15 40 7.5 45 5 15 40 5.5 125 250 1000 45 45 15 40 12 10 1500 1500 Units °e °e °e min. of arc °e °e °e °e min. of arc °e °e °e °e min. of arc °e °e ns ns °e °e °e min. of arc °e °e ns ns HEDM-5500 HEDM-5600 (Two Channel) HEDS-5540 HEDS-5640 (Three Channel) 55 -00 70 HEDM-5540 (Three Channel) 50 200 0 Note: See Mechanical Characteristics for mounting tolerances. *Typical values specified at VCC = 5.0 V and 25°C. 5 Electrical Characteristics Electrical Characteristic over Recommended Operating Range Part No. HEDS-5500 HEDS-5600 Parameter Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time Sym. ICC VOH VOL tr tf ICC VOH VOL tr tf ICC VOH VOL tr tf ICC VOH VOL tr tf Min 2.4 Typ.* 17 Max. 40 0.4 Units mA V V ns ns Notes IOH = -40�A max �A A IOL= .2mA CL= 25 pF RL = 11 kΩ pull-up IOH = -200�A max �A A IOL= .86mA CL= 25 pF RL = 2.7 kΩ pull-up IOH = -40�A max �A A IOL= .86mA CL= 25 pF RL = .2 kΩ pull-up IOH = -200�A max �A A IOL= .86mA CL= 25 pF RL = 2.7 kΩ pull-up 200 50 0 2.4 57 85 0.4 180 40 0 2.4 57 85 0.4 180 40 0 2.4 57 85 0.4 200 80 HEDS-5540 HEDS-5640 HEDM-5500 HEDM-5600 HEDM-5500 HEDM-5600 Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time mA V V ns ns mA V V ns ns mA V V ns ns HEDM-5540 Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time * Typical values specified at VCC = 5.0V and 25ºC 6 Mechanical Characteristics Parameter Codewheel Fits These Standard Shaft Diameters Symbol Dimension 24 568 5/2 1/8 /16 1/4 Tolerance[1] +0.000 -0.015 +0.0000 -0.0007 ± 0.5 (± 0.02) ± 0.1 (± 0.005) ± 0.1 (± 0.005) ± 0.1 (± 0.005) Units mm in g-cm2 (oz-in-s2) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) (in.) Moment of Inertia Required Shaft Length[2] Bolt Circle[] J 0.6 (8.0 x 10-6) 14.0 (0.55) 2 screw mounting  screw mounting external mounting ears 19.05 (0.750) 20.90 (0.82) 46.0 (1.811) M 2.5 or (2-56) M 1.6 or (0-80) M 2.5 or (2-56) 0. (0.10) (2-56) Mounting Screw Size[4] 2 screw mounting  screw mounting external mounting ears Encoder Base Plate Thickness Hub Set Screw Notes: 1. These are tolerances required of the user. 2. The HEDS-55X5 and 56X5, HEDM-5505, 5605 provide an 8.9 mm (0.5 inch) diameter hole through the housing for longer motor shafts. See Ordering Information. . The HEDS-5540 and 5640 must be aligned using the aligning pins as specified in Figure , or using the alignment tool as shown in “Encoder Mounting and Assembly”. See also “Mounting Considerations.” 4. The recommended mounting screw torque for 2 screw and external ear mounting is 1.0 kg-cm (0.88 in-lbs). The recommended mounting screw torque for  screw mounting is 0.50 kg-cm (0.4 in-lbs). Electrical Interface To insure reliable encodingperformance, the HEDS5540/5640 and HEDM-5540 three channel encoders require 2.7 kΩ (± 10%) pull-up resistors on output pins 2, , and 5 (Channels I, A, and B) as shown in Figure 1. These pullup resistors should be located as close to the encoder as possible (within 4 feet). Each of the three encoder outputs can drive a single TTL load in this configuration. The HEDS5500, 5600, and HEDM-5500, 5600 two channel encoders do not normally require pull-up resistors. However, .2 kΩ pull-up resistors on output pins  and 5 (Channels A and B) are recommended to improve rise times, especially when operating above 100 kHz frequencies. Figure 1. Pull-up Resistors on HEDS-5X40 and HEDM-5540 Encoder Outputs. 7 Mounting Considerations The HEDS-5540 and 5640 three channel encoders and the HEDM Series high resolution encoders must be aligned using the aligning pins as specified in Figure , or using the HEDS-8910 Alignment Tool as shown in Encoder Mounting and Assembly. The use of aligning pins or alignment tool is recommended but not required to mount the HEDS-5500 and 5600. If these two channel encoders are attached to a motor with the screw sizes and mounting tolerances specified in the mechanical characteristics section without any additional mounting bosses, the encoder output errors will be within the maximums specified in the encoding characteristics section. The HEDS-5500 and 5540 can be mounted to a motor using either the two screw or three screw mounting option as shown in Figure 2. The optional aligning pins shown in Figure  can be used with either mounting option. The HEDS-5600, 5640, and HEDM-5600 have external mounting ears which may be used for mounting to larger motor base plates. Figure 4 shows the necessary mounting holes with optional aligning pins and motor boss. Figure 2. Mounting Holes. Figure 3. Optional Mounting Aids. Figure 4. Mounting with External Ears. 8 Encoder Mounting and Assembly 1a. For HEDS-5500 and 5600: Mount encoder base plate onto motor. Tighten screws. Go on to step 2. 1b. For HEDS-5540, 5640 and HEDM-5500, 5600, 5540 : Slip alignment tool onto motor shaft. With alignment tool in place, mount encoder baseplate onto motor as shown above. Tighten screws. Remove alignment tool. 1c. It is recommended that adhesive* is applied to the screw-baseplate interface to prevent screw loosening due to effect of high temperature on plastic 2. Snap encoder body onto base plate locking all 4 snaps. a. Push the hex wrench into the body of the encoder to ensure that it is properly seated into the code wheel hub set screws. Then apply a downward force on the end of the hex wrench. This sets the code wheel gap by levering the code wheel hub to its upper position. b. While continuing to apply a downward force, rotate the hex wrench in the clockwise direction until the hub set screw is tight against the motor shaft (The recommended torque to tighten the setscrew is 1518 ozf.inch). The hub set screw attaches the code wheel to the motor’s shaft. c. Remove the hex wrench by pulling it straight out of the encoder body. 4. Use the center screwdriver slot, or either of the two side slots, to rotate the encoder cap dot clockwise from the one dot position to the two dot position. Do not rotate the encoder cap counterclockwise beyond the one dot position. The encoder is ready for use! 9 Connectors Manufacturer AMP Avago (designed to mechanically lock into the HEDS-5XXX, HEDM-5X0X Series) Molex Part Number 10686-4 640442-5 HEDS-8902 (2 ch.) with 4-wire leads HEDS-890 ( ch.) with 5-wire leads 2695 series with 2759 series term. Figure 5. HEDS-8902 nd 8903 connectors Protective Silicon Cover Protective Silicon Rubber cover gives an extra protection for HEDS-5xx0 and HEDM-5xx0 family when operating in dusty environment. The protective silicon cover is installed to HEDS-5xx0 or HEDM-5xx0 prior to the connector to the encoder is installed. Part Number Material Used With Temperature Range HEDS-8907-001 Silicon Rubber- Semi transparent-ESD protective material -40ºC to 100ºC 7.20 .283 HEDS-5xx0 and HEDM-5xx0 31.40 1.236 14.00 .551 42.50 1.673 1. Dimensions are in millimeters Inches 2. All tolerances are within ±0.5 16.50 .650 10 Typical Interfaces HEDS–55XX OR HEDS-56XX OR HEDM-5X0X CH. A CH. B HCTL-20xx QUADRATURE DECODER/ COUNTER HOST PROCESSOR HEDS–55XX OR HEDS-56XX OR HEDM-5X0X CH. A CH. B HCTL-1100 MOTION CONTROL IC HOST PROCESSOR Ordering Information Encoders with Film Codewheels HEDM-5 Mounting Type 5 - Standard 6 - External Mounting Ears Outputs 0 - 2 Channel 4 - 3 Channel 0 Option Resolution (Cycles/Rev) B - 1000 CPR J - 1024 CPR Shaft Diameter 2 mm 06 3 mm 11 1/8 in. 14 5/32 in. 12 3/16 in. 13 Through Hole 0 - None 5 - 8.9 mm (0.35 in.) 01 02 03 04 05 - - 1/4 in. 4 mm 5 mm 6 mm 8 mm HEDS-8910 0 Alignment Tool (Included with each order of HEDM-550X/560X two channel encoders and HEDM-554X three Channel encoders) HEDS-5 Mounting Type 5 - Standard 6 - External Mounting Ears Outputs 0 - 2 Channel 4 - 3 Channel Through Hole 0 - None 5 - 8.9 mm (0.35 in.) Option Resolution (Cycles/Rev) (HEDS-550X, 560X 2 Channel) S - 50 CPR F - 256 CPR K - 96 CP G - 360 CPR C - 100 CPR H - 400 CPR D - 192 CPR A - 500 CPR E - 200 CPR I - 512 CPR (HEDS-554X, 564X 3 Channel) G - 360 CPR S - 50 CPR H - 400 CPR K - 96 CPR A - 500 CPR C - 100 CPR I - 512 CPR E - 200 CPR F - 256 CPR Shaft Diameter 2 mm 06 3 mm 11 1/8 in. 14 5/32 in. 12 3/16 in. 13 01 02 03 04 05 - - 1/4 in. 4 mm 5 mm 6 mm 8 mm HEDS-8910 0 Alignment Tool (Included with each order of HEDS-554X/564X three channel encoders) 11 01 02 03 04 05 06 11 12 13 14 HEDM-5500 B J HEDM-5505 B J HEDM-5540 B HEDM-5545 B HEDM-5600 B J HEDM-5605 B J HEDS-5500 A C E F G H I K S HEDS-5505 A C E F G H I K HEDS-5540 A C E F G H I * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * HEDS-5645 * * * * * * * * * * * * * * * * * * * * * HEDS-5640 HEDS-5605 * * * * * * * * * * * * * * * HEDS-5600 * * * * * * * * * HEDS-5545 A C H I A C E G H I A C E F G H I A E F H A C E G H I 01 02 03 04 05 06 11 12 13 14 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-1046EN - February 29, 2008