HSMD-S690

High Performance Surface Mount Chip LEDs Technical Data SunPower Series HSMx-S660 Series HSMx-S670 Series HSMx-S690 Series Features Description • High Brightness AlInGaP Material • Industry Standard 2.00 x 1.25 mm Package • Industry Standard 1.6 x 0.8 mm (Low Profile) Package • Right Angle Package • Three Colors Available • Diffused Optics • Compatible with IR Solder Process • Available in 8 mm Tape on 7” (178 mm) Diameter Reels These chip-type LEDs utilize aluminum indium gallium phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The 590 nm amber, 605 nm orange, and 626 nm red colors are available in three compact, low profile packages. Applications • Keypad Backlighting • LCD Backlighting • Symbol Backlighting • Front Panel Indicator The HSMx-S670 is the industry standard 2.0 x 1.25 mm package, and is an excellent all around package. The HSMx-S690 is the industry standard 1.6 x 0.8 mm package. Its low 0.7 mm profile and wide viewing angle make this LED excellent for backlighting applications. The HSMx-S660 right angle, 3.0 x 2.0 x 1.0 mm LED is optimum for side lighting applications where direct backlighting is not practical. All packages are compatible with IR and convective reflow soldering processes. Device Selection Guide Footprint (mm) [1][2] Amber 590 nm Orange 605 nm Red 626 nm 1.6 x 0.8 x 0.7 HSMA-S690 HSMD-S690 HSMC-S690 2.0 x 1.25 x 0.8 HSMA-S670 HSMD-S670 HSMC-S670 3.0 x 2.0 x 1.0 HSMA-S660 HSMD-S660 HSMC-S660 Notes: 1. Dimensions in mm. 2. Tolerance ± 0.1 mm unless otherwise noted. 2 Package Dimensions 0.1 0.8 + - 0.05 1.25 ANODE ANODE 0.7 0.8 0.3 0.2 0.40 0.35 (0.13) (0.28) 2.0 1.3 1.2 1.2 1.1 1.6 1 3 2 CATHODE MARK 0.35 0.40 POLARITY MARK CATHODE HSMx-S670 Series 2 1 3 CATHODE MARK CATHODE HSMx-S690 Series 3.0 1 1.0 0.3 0.3 FRONT VIEW 2.0 R0.8 2 2.0 3 1.0 TOP VIEW 0.25 0.25 (0.88) CATHODE ANODE R0.45 PIN CONNECTION MARK TO REINFORCE SOLDERING (NON-PIN CONNECTION) Notes: 1. Dimensions are in millimeters (inches). 2. Tolerance, unless otherwise specified, ± 0.1 mm (± 0.004 inch). REAR VIEW HSMx-S660 Series Absolute Maximum Ratings at TA = 25ºC Parameter HSMx-S660 HSMx-S670 HSMx-S690 Units 30 30 30 mA Power Dissipation 81 81 81 mW Reverse Voltage (IR = 100 µA) 5 5 5 V Operating Temperature Range -40 to +85 -40 to +85 -40 to +85 ºC Storage Temperature Range -40 to +100 -40 to +100 -40 to +100 ºC DC Forward Current [1][2][3][4] Notes: 1. Derate linearly as shown in Figure 4. 2. Drive currents between 1 mA and 30 mA are recommended for best long term performance. 3. Operating at currents below 1 mA is not recommended. Please contact your Agilent representative for further information. 4. Maximum temperature for tape and reel packaging is 60°C. POLARITY MARK 3 Optical Characteristics at TA = 25ºC Luminous Intensity IV (mcd) @ IF = 20 mA[1] Min. Typ. Peak Wavelength λpeak (nm) Typ. Color, Dominant Wavelength λd[2] (nm) Typ. Viewing Luminous Angle 2θ1/2 Efficacy Degrees [3] ηV Typ. (lm/W) Part Number Color HSMA-S660 Amber 16.0 65.0 592 590 155 480 HSMA-S670 Amber 16.0 65.0 592 590 165 480 HSMA-S690 Amber 16.0 65.0 592 590 165 480 HSMD-S660 Orange 16.0 65.0 609 605 155 370 HSMD-S670 Orange 16.0 65.0 609 605 165 370 HSMD-S690 Orange 16.0 65.0 609 605 165 370 HSMC-S660 Red 16.0 50.0 630 626 155 197 HSMC-S670 Red 16.0 50.0 630 626 165 197 HSMC-S690 Red 16.0 50.0 630 626 165 197 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominate wavelength λd is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristics at TA = 25ºC Forward Voltage V F (Volts) @ I F = 20 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 µA Min. Capacitance C (pF), VF = 0, f = 1 MHz Typ. Thermal Resistance RθJ-PIN (ºC/W) Part Number Color HSMA-S660 HSMA-S670 HSMA-S690 Amber Amber Amber 1.9 1.9 1.9 2.4 2.4 2.4 5 5 5 45 45 45 600 300 300 HSMD-S660 HSMD-S670 HSMD-S690 Orange Orange Orange 1.9 1.9 1.9 2.4 2.4 2.4 5 5 5 45 45 45 600 300 300 HSMC-S660 HSMC-S670 HSMC-S690 Red Red Red 1.9 1.9 1.9 2.4 2.4 2.4 5 5 5 45 45 45 600 300 300 4 Yellow/Amber Color Bins[1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 594.5 594.5 597.0 Tolerance: ± 0.5 nm. Orange Color Bins[1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 597.0 600.0 600.0 603.0 603.0 606.0 606.0 609.0 609.0 612.0 612.0 615.0 Tolerance: ± 1 nm. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins. 5 Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Bin ID A B C D E F G H J K L M N P Q R S T U V W X Y Min. 0.11 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00 Max. 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00 4500.00 Tolerance ± 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins. 6 1.0 ORANGE AMBER RELATIVE INTENSITY RED 0.5 0 550 594 600 607 630 650 700 WAVELENGTH – nm IF – FORWARD CURRENT – mA Figure 1. Relative Intensity vs. Wavelength. 100 50 20 10 5 2 1 0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF – FORWARD VOLTAGE – V RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 IF – DC FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. Forward Current. IF MAX. – MAXIMUM FORWARD CURRENT – mA Figure 2. Forward Current vs. Forward Voltage. 35 30 25 20 RθJ-A = 600 °C/W 15 RθJ-A = 500 °C/W 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum Forward Current vs. Ambient Temperature. 7 20° 10° 0° 1.0 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° NORMALIZED INTENSITY 30° 40° 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT – DEGREES Figure 5. Relative Luminous Intensity vs. Angular Displacement for HSMx-S660. 1.0 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT – DEGREES Figure 6. Relative Luminous Intensity vs. Angular Displacement for HSMx-S670. 1.0 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT – DEGREES Figure 7. Relative Luminous Intensity vs. Angular Displacement for HSMx-S690. 8 0.9 2.4 0.2 0.8 0.8 0.9 5.0 2.0 HSMX-S690 SERIES RWS CENTER 3.4 1.5 1.1 MOUNTING EXAMPLE EMITTED DIRECTION 1.3 HSMX-S670 SERIES HSMX-S660 SERIES Figure 8. Recommended Solder Patterns. 10 to 20 SEC. 255 °C (+5/-0) TEMPERATURE 217 °C 3 °C/SEC. MAX. 6 °C/SEC. MAX. 140 - 160 °C 60 to 150 SEC. MAX. 120 SEC. TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 9. Recommended Pb-Free IR Reflow Profile. 9 180 Ø (7.08) 21.0 (0.83) 2.0 (0.08) USER FEED DIRECTION 60.0 Ø (2.36) Ø 13.0 (0.51) LABEL CATHODE SIDE 60° 60° 1.5 TYP. (0.06) PRINTED LABEL NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES). Figure 10. Reeling Orientation. Figure 11. Reel Dimensions. 4.00 ± 0.10 (0.157 ± 0.004) 1.50 + 0.10 0 Ø (0.059 + 0.004) 0 CATHODE 1.30 ± 0.10 (0.051 ± 0.004) 0.20 ± 0.05 (0.008 ± 0.002) 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE 1) DIM. B (SEE TABLE 1) 2.00 ± 0.05 (0.079 ± 0.002) 8.00 ± 0.30 (0.315 ± 0.012) USER FEED DIRECTION 4.00 ± 0.10 (0.157 ± 0.004) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER DIM. A DIM. B ± 0.10 (0.004) ± 0.10 (0.004) HSMX-S670 SERIES 2.25 (0.089) 1.45 (0.057) HSMX-S690 SERIES 1.85 (0.073) 1.00 (0.039) Figure 12. Tape Dimensions HSMx-S670, HSMx-S690. CATHODE HOLE FOR HSMX-S690 SERIES CARRIER TAPE COVER TAPE 13.0 (0.51) 10.0 (0.39) 10 1.50 + 0.10 0 Ø (0.059 + 0.004) 0 4.00 ± 0.10 (0.157 ± 0.004) 1.20 CATHODE 2.0 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) 3.35 (0.15) 8.00 ± 0.30 (0.315 ± 0.012) 2.3 (0.08) (Ø1.1) CATHODE HOLE USER FEED DIRECTION 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) Figure 13. Tape Dimensions HSMx-S660. END THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. 150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 14. Tape Leader and Trailer Dimensions. Storage Condition: 5 to 30˚ C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 +/– 5˚C for 20 hours. CATHODE HOLE www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-7964EN October 2, 2003 5989-0164EN