MSA-0386-TR1G

MSA-0386 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet Description Features The MSA-0386 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount plastic package. This MMIC is designed for use as a general purpose 50  gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications.  Lead-free Option Available The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility.  Unconditionally Stable (k>1) 86 Plastic Package Typical Biasing Configuration Rbias VCC t7 V RFC (Optional) 4 Cblock IN 1 MSA 2 Cblock 3 OUT Vd = 5 V  Cascadable 50  Gain Block  3 dB Bandwidth: DC to 2.4 GHz  12.0 dB Typical Gain at 1.0 GHz  10.0 dBm Typical P1 dB at 1.0 GHz  Surface Mount Plastic Package  Tape-and-Reel Packaging Option Available MSA-0386 Absolute Maximum Ratings Thermal Resistance [2]: jc = 115°C/W Absolute Maximum [1] Parameter Device Current 70 mA Power Dissipation [2, 3] 400 mW RF Input Power +13 dBm Junction Temperature 150° C Storage Temperature -65 to 150° C Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25° C. 3. Derate at 9.5 mW/°C for TC > 116° C. Electrical Specifications[1], TA = 25° C Symbol Parameters and Test Conditions: Id = 35 mA, ZO = 50  Units GP Power Gain (|S21|2) f = 0.1 GHz f = 1.0 GHz dB f = 0.1 to 1.6 GHz dB +0.7 GHz 2.4 Min. Typ. 10.0 12.5 12.0 GP Gain Flatness f3 dB 3 dB Bandwidth[2] VSWR Input VSWR f = 0.1 to 3.0 GHz 1.5:1 Output VSWR f = 0.1 to 3.0 GHz 1.7:1 NF 50  Noise Figure f = 1.0 GHz dB 6.0 P1dB Output Power at 1 dB Gain Compression f = 1.0 GHz dBm 10.0 IP3 Third Order Intercept Point f = 1.0 GHz dBm 23.0 tD Group Delay f = 1.0 GHz psec 140 Vd Device Voltage V dV/dT Device Voltage Temperature Coefficient mV/°C 4.0 5.0 Max. 6.0 -8.0 Notes: 1. The recommended operating current range for this device is 20 to 40 mA. Typical performance as a function of current is on the following page. Ordering Information Part Numbers No. of Devices Comments MSA-0386-BLK 100 Bulk MSA-0386-BLKG 100 Bulk MSA-0386-TR1 1000 7" Reel MSA-0386-TR1G 1000 7" Reel MSA-0386-TR2 4000 13" Reel MSA-0386-TR2G 4000 13" Reel Note: Order part number with a “G” suffix if lead-free option is desired. 2 MSA-0386 Typical Scattering Parameters (ZO = 50 , TA = 25° C, Id = 35 mA) Freq. GHz S11 Mag Ang dB Mag Ang dB Mag Ang Mag Ang 0.1 0.11 174 12.5 4.22 175 -18.3 0.122 1 0.13 -11 0.2 0.11 169 12.5 4.20 170 -18.2 0.124 2 0.13 -20 0.4 0.11 159 12.4 4.16 159 -18.1 0.124 5 0.14 -41 0.6 0.10 149 12.2 4.09 149 -17.9 0.128 8 0.15 -60 0.8 0.10 142 12.1 4.00 139 -17.6 0.131 9 0.16 -78 1.0 0.09 137 11.9 3.93 129 -17.4 0.136 11 0.18 -93 1.5 0.09 139 11.2 3.61 106 -16.6 0.149 14 0.20 -129 2.0 0.12 149 10.3 3.28 83 -15.3 0.171 13 0.23 -157 2.5 0.18 150 9.4 2.95 66 -14.4 0.190 12 0.26 -176 3.0 0.25 142 83 2.60 48 -13.7 0.207 9 0.29 167 3.5 0.32 133 7.2 2.29 31 -13.2 0.219 3 0.30 152 4.0 0.40 124 6.0 2.01 15 -13.0 0.224 -1 0.31 142 5.0 0.53 106 3.7 1.53 -13 -12.8 0.228 -11 032 128 3 S21 S12 S22 Typical Performance, TA = 25° C (unless otherwise noted) 14 60 12 50 40 8 Id (mA) Gp (dB) 10 Id = 20 mA Id = 35 mA Id = 50 mA 6 4 10 Gain Flat to DC 0.1 0.3 0.5 1.0 FREQUENCY (GHz) 3.0 11 4 5 6 8 12 P1 dB (dBm) 10 9 9 Id = 35 mA 6 NF 7 NF (dB) 3 Vd (V) Id = 50 mA P1 dB (dBm) Gp (dB) P1 dB 3 6 -25 0 +25 +55 TEMPERATURE (C) 0 0.1 +85 Figure 3. Output Power at 1 dB Gain Compression, NF and Power Gain vs. Case Temperature, f = 1.0 GHz, Id = 35 mA. 7.0 NF (dB) 2 15 GP 11 Id = 20 mA Id = 35 mA Id = 50 mA 6.0 5.5 5.0 0.1 1 18 12 6.5 0 Figure 2. Device Current vs. Voltage. 13 5 0 6.0 Figure 1. Typical Power Gain vs Frequency, TA = 25° C. 0.2 0.3 0.5 1.0 FREQUENCY (GHz) Figure 5. Noise Figure vs. Frequency. 4 30 20 2 0 TC = +85° C TC = +25° C TC = –25° C 2.0 Id = 20 mA 0.2 0.3 0.5 1.0 FREQUENCY (GHz) 2.0 Figure 4. Output Power at 1 dB Gain Compression vs. Frequency. 4.0 86 Plastic Package Dimensions 0.51 ±0.13 (0.020 ±0.005) GROUND RF OUTPUT AND DC BIAS 1 CL 3 2.34 ±0.38 (0.092 ±0.015) A03 45° RF INPUT GROUND 1.52 ±0.25 (0.060 ±0.010) 4 2 2.67 ±0.38 (0.105 ±0.15) 5° TYP. 0.66 ±0.13 (0.026 ±0.005) 2.16 ±0.13 (0.085 ±0.005) 0.203 ±0.051 (0.006 ±0.002) 8° MAX 0° MIN 0.30 MIN (0.012 MIN) Dimensions are in millimeters (inches) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-2751EN AV02-3581EN - June 11, 2012