02014W104KAT2A

Surface Mount Ceramic Capacitor Products 110121 IMPORTANT INFORMATION/DISCLAIMER All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or made available on the website are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KYOCERA AVX’s knowledge of typical operating conditions for such applications, but are not intended to constitute and KYOCERA AVX specifically disclaims any warranty concerning suitability for a specific customer application or use. ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KYOCERA AVX with reference to the use of KYOCERA AVX’s products is given without regard, and KYOCERA AVX assumes no obligation or liability for the advice given or results obtained. Although KYOCERA AVX designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Unless specifically agreed to in writing, KYOCERA AVX has not tested or certified its products, services or deliverables for use in high risk applications including medical life support, medical device, direct physical patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control, flammable environments, or any other potentially life critical uses. Customer understands and agrees that KYOCERA AVX makes no assurances that the products, services or deliverables are suitable for any highrisk uses. Under no circumstances does KYOCERA AVX warrant or guarantee suitability for any customer design or manufacturing process. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 111919 – surface mount ceramic capacitor products – Surface Mount Ceramic Capacitor Products Table of Contents How to Order Part Number Explanation............................................................................... 1 C0G (NP0) Dielectric Automotive MLCC General Specifications................................................................................. 54 Capacitance Range...................................................................................... 56 General Specifications................................................................................... 3 Specifications and Test Methods.................................................................. 4 Capacitance Range........................................................................................ 5 APS for COTS+ High Reliability Applications U Dielectric MLCC with FLEXITERM® RF/Microwave C0G (NP0) Capacitors (RoHS) RF/Microwave C0G (NP0) Capacitors (Sn/Pb) RF/Microwave Automotive C0G (NP0) Capacitors (RoHS) AEC Q200 Qualified Ultra Low ESR.......................................................... 13 Designer Kits............................................................................................... 15 General Specifications................................................................................. 59 Capacitance Range...................................................................................... 60 General Specifications................................................................................. 63 Specifications and Test Methods................................................................ 64 Capacitance Range...................................................................................... 66 FLEXISAFE MLC Chips General Specifications and Capacitance Range.......................................... 68 X8R/X8L Dielectric General Specifications................................................................................. 16 Specifications and Test Methods................................................................ 18 X7R Dielectric General Specifications................................................................................. 19 Specifications and Test Methods................................................................ 20 Capacitance Range...................................................................................... 21 X7S Dielectric General Specifications................................................................................. 23 Specifications and Test Methods................................................................ 24 Capacitance Range...................................................................................... 25 Capacitor Array Capacitor Array (IPC)................................................................................... 69 Automotive Capacitor Array (IPC)................................................................ 73 Part & Pad Layout Dimensions.................................................................... 74 Low Inductance Capacitors Introduction................................................................................................. 75 LICC (Low Inductance Chip Capacitors) ..................................................... 77 IDC (InterDigitated Capacitors).................................................................... 81 LGA Low Inductance Capacitors.................................................................. 85 High Temperature MLCCs AT Series – 200ºC & 250°C Rated............................................................... 88 X5R Dielectric General Specifications................................................................................. 26 Specifications and Test Methods................................................................ 27 Capacitance Range...................................................................................... 28 Y5V Dielectric General Specifications................................................................................. 30 Specifications and Test Methods................................................................ 31 Capacitance Range...................................................................................... 32 MLCC Gold Termination — AU Series High Voltage MLC Chips For 600V to 5000V Applications.................................................................. 94 Tin/Lead Termination “B” - 600V to 5000V Applications............................. 99 FLEXITERM® - 600V to 5000V Applications............................................... 101 For 600V to 3000V Automotive Applications - AEC-Q200.......................... 106 MIL-PRF-55681/Chips CDR01 thru CDR06..................................................................................... 108 CDR31 thru CDR35..................................................................................... 110 General Specifications................................................................................. 33 Capacitance Range...................................................................................... 34 MLCC Medical Applications MLCC Tin/Lead Termination "B" (LD Series) Packaging of Chip Components...................................................... 119 C0G (NP0) – General Specifications............................................................ 40 Specifications and Test Methods........................................... 41 Capacitance Range................................................................. 42 X8R General Specifications............................................................ 44 Specifications and Test Methods........................................... 45 Capacitance Range................................................................. 46 X7R General Specifications............................................................ 47 Specifications and Test Methods........................................... 48 Capacitance Range................................................................. 49 X5R General Specifications............................................................ 51 Specifications and Test Methods........................................... 52 Capacitance Range................................................................. 53 MM Series ................................................................................................. 114 Embossed Carrier Configuration..................................................... 120 Paper Carrier Configuration.............................................................. 121 Basic Capacitor Formulas.................................................................. 122 General Description............................................................................. 123 Surface Mounting Guide.................................................................... 128 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. – surface mount ceramic capacitor products – How to Order Part Number Explanation Commercial Surface Mount Chips EXAMPLE: 08055A101JAT2A 0805 5 Size Voltage (L" x W") 0101* 0201 0402 0603 0805 1206 1210 1812 1825 2220 2225 *EIA 01005 4 = 4V 6 = 6.3V Z = 10V Y = 16V 3 = 25V D = 35V 5 = 50V 1 = 100V 2 = 200V 7 = 500V A 101 J* A Dielectric Capacitance Tolerance B = ±.10 pF Failure Rate A = NP0(C0G) C = X7R D = X5R F = X8R G = Y5V U = U Series W = X6S Z = X7S Contact Factory for Special Voltages F = 63V E = 150V V = 250V 9 = 300V 8 = 400V 2 Sig. Fig + No. of Zeros Examples: 100 = 10 pF 101 = 100 pF 102 = 1000 pF 223 = 22000 pF 224 = 220000 pF 105 = 1μF 106 = 10μF 107 = 100μF For values below 10 pF, use “R” in place of Decimal point, e.g., 9.1 pF = 9R1. C = ±.25 pF A = N/A D = ±.50 pF 4 = Automotive F = ±1% (≥ 10 pF) G = ±2% (≥ 10 pF) J = ±5% K = ±10% M = ±20% Z = +80%, -20% P = +100%, -0% T 2 A** Terminations Packaging Special Code T = Plated Ni and Sn 7 = Gold Plated U = Conductive Expoxy for Hybrid Applications Z = FLEXITERM® *X = FLEXITERM® with 5% min lead (X7R & X8R only) Available 2 = 7" Reel 4 = 13" Reel U = 4mm TR (01005) Contact Factory For Multiples A = Std K = 30K (0603 2mm pitch) 22K (0805/1206