5NS471MBDCC

Disc Ceramic Capacitors Professional Ceramic Capacitors - Class I, II and III MIL-STD-202F The professional ceramic disc capacitors were specially developed for applications in severe environmental conditions, high humidity, temperature, gas, vapor and solvents. The capacitors are flame retardant epoxy coated, meeting UL 94-V0 flammability specifications. The capacitors are 100% screened on following electrical parameters: Capacitance, loss factor, test voltage. After the 100% test, the capacitors are audited on its electrical and mechanical parameters with following AQL: Electrical parameters: 0.065% level II Mechanical parameters: 0.65% level II The capacitors withstand the following reliability essays: Terminal strength: method 211 – condition A Resistance to solvents: method 215 Resistance to soldering heat: method 210 – condition B Solderability: method 208 Thermal shock: method 107 – condition A Humidity (steady state): method 103 – condition D Life (at elevated ambient temperature): method 108 – condition D Operating temperature and storage: -55... +125º C Ø mm = 0.6 ± 0.1 (0.024) (0.004) Ø mm = 0.8 ± 0.1 (0.031) (0.004) Preferred lead spacing F = 5 (0.197) millimeters (inches) Lead Spacing Digit 8 F 2.5 (0.100) D — 5 (0.200) A O 6 (0.250) E X 7.5 (0.300) B R 10 (0.400) C W DIMENSIONS Digit 9 (ø) D±2 (0.079) millimeters (inches) T max. Available Lead Spacing A NP0 1pF... 2.7 pF 4.0 (0.157) 3.0 (0.118) A,B,D,E,O,R A N1500 5.6pF... 8.2 pF 4.0 (0.157) 3.0 (0.118) A,B,D,E,O,R 4.0 (0.157) 3.0 (0.118) A,B,D,E,O,R 5.0 (0.197) 6.0 (0.236) 7.0 (0.276) 8.0 (0.315) 9.0 (0.354) 10.0 (0.394) 11.0 (0.433) 13.0 (0.512) 15.0 (0.591) 19.0 (0.748) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.5 (0.138) 3.5 (0.138) 4.0 (0.157) A,B,D,E,O,R,X A,B,C,D,E,O,R,X A,B,C,D,E,O,R,X A,B,C,D,E,O,R,X A,B,C,E,O,R,X A,B,C,E,O,R,X A,B,C,E,O,R,W B,C,R,W B,C,R,W B,C A Others B C D E F G H J K M (E), (X), (W): upon request 23 Disc Ceramic Capacitors General Specifications - Class III Professional DIELECTRIC - CLASS III A thin dielectric layer is grown on a disc of conductive ceramic. Very large capacitances can be obtained due to reduced thickness of this barrier layer and its inherently high dielectric constant. Due its small dimensions, they are a less expensive replacement of multilayer ceramic or polyester capacitors. DIMENSIONS Digit 9 of P.N. (ø) D±2 (0.079) millimeters (inches) T max. Available Lead Spacing A 4.0 (0.157) 3.0 (0.118) A,B,D,E,O,R B 5.0 (0.197) 3.0 (0.118) A,B,D,E,O,R,X C 6.0 (0.236) 3.0 (0.118) A,B,C,D,E,O,R,X D 7.0 (0.276) 3.0 (0.118) A,B,C,D,E,O,R,X E 8.0 (0.315) 3.0 (0.118) A,B,C,D,E,O,R,X F 9.0 (0.354) 3.0 (0.118) A,B,C,E,O,R,X G 10.0 (0.394) 3.0 (0.118) A,B,C,E,O,R,X H 11.0 (0.433) 3.0 (0.118) A,B,C,E,O,R,W J 13.0 (0.512) 3.5 (0.138) K 15.0 (0.591) Ø = 0.6 ± 0.1 (0.024) (0.004) 4.0 (0.157) Preferred lead spacing F = 5 (0.197) millimeters (inches) Lead Spacing F 2.5 (0.100) D — B,C,R,W 5 (0.200) A O B,C,R,W 6 (0.250) E X (E), (X), (W): upon request 7.5 (0.300) B R 10 (0.400) C W PERFORMANCE CHARACTERISTICS CLASS III Measured at 1.0 kHz / 0.1 Vrms / 25ºC CR ≤ 22 nF → Y5V, Y5U ≤ 7.5% CR > 22 nF → Y5V, Y5P ≤ 5.0% Dissipation Factor Y5P → ±20% / -20 +50% Y5U → ±20% / -20 +80% Y5V → ±20% / -20 +80% Capacitance Tolerance Climatic Category 55 / 085 / 56 Insulation Y5P ≥12 MΩ Resistance @ VR Y5U 4.7 nF...100 nF → ≥ 10 MΩ 200 nF → ≥ 1 MΩ Y5V ≥ 100 MΩ Dielectric Strength NOTE: Charging Between leads Vt = 1.25 VR current limited to 50 mA Body insulation VR = 25V Vt = 100V (DC) VR = 50V Vt = 150V (DC) Operating Temperature Range (ºC) -55... +125 Epoxy Coated Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied. 26 Digit 8 of P.N. Disc Ceramic Capacitors Dimension Table Barrier Layer Capacitors - Class III Professional EPOXY COATED – CAPACITANCE VS. DISC DIAMETER Class III ∆ C/C (max.) ±12% Temp. Coefficient Digits 1,2,3 of P.N. Rated Voltage (VR) CR (pF) 4,700 10,000 22,000 33,000 47,000 50,000 68,000 100,000 200,000 Range -30... +85ºC ∆ C/C (max.) +30 -65% Y5P Range -30... +85ºC Y5U millimeters (inches) ∆ C/C (max.) +22 -85% Range -30... +85ºC Y5V 6WF 6WH 6YF 6YH 6ZH 25 50 25 50 50 4.0 (0.157) 6.0 (0.236) 7.0 (0.276) 8.0 (0.315) 4.0 (0.157) 6.0 (0.236) 8.0 (0.315) 9.0 (0.354) 11.0 (0.433) — 13.0 (0.512) 15.0 (0.591) — 4.0 (0.157) 4.0 (0.157) 5.0 (0.197) 6.0 (0.236) 6.0 (0.236) 7.0 (0.276) 7.0 (0.276) 8.0 (0.315) 13.0 (0.512) — 10.0 (0.394) 11.0 (0.433) 13.0 (0.512) — Y5U, Y5V - Preferences 4.0 (0.157) 5.0 (0.197) 7.0 (0.276) Diameter (φ) = 9th Part Number Digit 27 Disc Ceramic Capacitors Ordering Code HOW TO ORDER 5 O Q 222 General Purpose 5A = NP0 / I *5B = P100 / I *5C = N150 / I *5D = N220 / I *5E = N330 / I *5F = N470 / I 5G = N750 / I 5H = N1500 / I *5I = N2200 / I *5J = N4700 / I 5K = SL 5M = Y5E / II 5N = Y5F / II 5O = Y5P / II *5P = Y5R / II *5Q = Y5T / II 5S = Y5U / II 5T = Y5V / II 5U = Z5V / II *5V = Z4V / III 5W = Y5P / III 5Y = Y5U / III 5Z = Y5V / III Professional Switch Mode Safety 6A = NP0 / I *6B = P100 / I *6C = N150 / I *6D = N220 / I *6E = N330 / I *6F = N470 / I 6G = N750 / I *6H = N1500 / I *6I = N2200 / I 6J = N4700 / I 61 = SAFETY 62 = SAFETY 65 = SAFETY 67 = Y5U / SM 68 = Y5V / SM 6L = Y5P / SM 6M = X5E / II 6N = X5F / II 6O = X5P / II *6P = X5R / II *6Q = X5T / II 6S = X5U / II 6T = X5V / II 6U = Z5V / II *6V = Z4V / III 6W = Y5P / III 6Y = Y5U / III 6Z = Y5V / III Rated Voltage (dc) D = 16V F = 25V H = 50V K = 100V N = SAFETY O = SAFETY Q = 500V R = 1000V S = 2000V T = 3000V U = 4000V V = SAFETY W = 5000V *X = 6000V *Y = 7500V Capacitance 222 = 2.2 nF *Upon Request 4 Capacitance = TPC code 1 pF = 1R0 1.2pF = 1R2 1.5pF = 1R5 1.8pF = 1R8 2.2pF = 2R2 2.7pF = 2R7 3.9pF = 3R9 4.7pF = 4R7 5.6pF = 5R6 6.8pF = 6R8 8.2pF = 8R2 10pF = 100 12pF = 120 15pF = 150 18pF = 180 22pF = 220 27pF = 270 33pF = 330 39pF = 390 47pF = 470 56pF = 560 68pF = 680 82pF = 820 Capacitance = TPC code 100pF = 101 120pF = 121 150pF = 151 180pF = 181 220pF = 221 270pF = 271 330pF = 331 390pF = 391 470pF = 471 560pF = 561 680pF = 681 820pF = 821 1nF = 102 1.2nF = 122 1.8nF = 182 2.2nF = 222 2.7nF = 272 3.3nF = 332 3.9nF = 392 4.7nF = 472 5.6nF = 562 6.8nF = 682 8.2nF = 822 10nF = 103 15nF = 153 22nF = 223 33nF = 333 47nF = 473 100nF = 104 200nF = 204 Disc Ceramic Capacitors Ordering Code M A E Tolerance C = ±0.25 pF D = ±0.50 pF J = ±5% K = ±10% M = ±20% S = -20+50% Z = -20+80% P = 0+100% A A Packaging Capacitor Diameter ± 2 (0.079) A = 4 (0.157) B = 5 (0.197) C = 6 (0.236) D = 7 (0.276) E = 8 (0.315) F = 9 (0.354) G = 10 (0.394) H = 11 (0.433) J = 13 (0.512) K = 15 (0.591) M* = 19 (0.748) Cardboard Strips A= Bulk E = 5 (0.197) ± 1 (0.039) free wire length C = 10 (0.394) ± 1 (0.039) free wire length D = 25 (0.984) ± 1 (0.039) free wire length Taping Avisert Reel Panasert *Wire 0.8 (0.031) recommended H Lead Forming inches 2.5 ±0.5 +0.6 5 -0.2 +0.6 6 -0.2 +1 7.5 -0.5 +0.5 10 -1.0 +1 12.5 -0.5 .1 ± .025 D – – .2 ± .025 A O N .25 ± .025 E X – .3 ± .05 B R Q .4 ± .05 C W – .5 ± .05 P – – L Avisert Ammo Pack mm L I M M J L L Panasert K M M Finishing Diam ≤9 (0.354) and F = 5.00 (0.197) For every other: Coating does not surpass the bend Low Voltage A = Phenolic General Q = Waxed phenolic ( Purpose ) S = Epoxy (Professional) cap. diameter ≤ 8 (0.315) D = Epoxy (Professional) cap. diameter > 8 (0.315) High Voltage F = Measured from the center of leads 0.6 ± 0.1 (0.024) (0.004) 0.8 ± 0.1 I = Epoxy wire diameter (0.031) (0.004) L = Phenolic wire diameter 0.6 ± 0.1 (0.024) (0.004) C = Epoxy wire diameter Please note that not all code combinations are either possible or available. 5 Disc Ceramic Capacitors Marking DIG. 2 Logo: Only in diam. ≥ 6mm O TC / Class General Purpose A = NP0 / I *B = P100 / I *C = N150 / I *D = N220 / I *E = N330 / I *F = N470 / I G = N750 / I H = N1500 / I *I = N2200 / I *J = N4700 / I K = SL M = Y5E / II N = Y5F / II O = Y5P / II P = Y5R / II Q = Y5T / II S = Y5U / II T = Y5V / II U = Z5V / II V = Z4V / III *W = Y5P / II *X = Y5R / II Y = Y5U / II Z = Y5V / II *Upon Request Professional A = NP0 / I B = P100 / I C = N150 / I D = N220 / I E = N330 / I F = N470 / I G = N750 / I H = N1500 / I I = N2200 / I J = N4700 / I 7 = Y5U / SM 8 = Y5V / SM L = Y5P / SM M = X5E / II N = X5F / II O = X5P / II P = X5R / II Q = X5T / II S = X5U / II T = X5V / II U = Z5V / II V = Z4V / III W = Y5P / III X = Y5R / III Y = Y5U / III Z = Y5V / III 222 OQM DIG. 3 Q DIG. 7 M Rated Voltage D = 16V F = 25V H = 50V K = 100V Q = 500V R = 1000V S = 2000V T = 3000V U = 4000V W = 5000V X = 6000V Y = 7500V Tolerance C = ±0.25pF D = ±0.5pF J = ±5% K = ±10% M = ±20% S = -20 +50% Z = -20 +80% P = 0 +100% Capacitance 1pF = 109 1.2pF = 129 1.5pF = 159 1.8pF = 189 2.2pF = 229 2.7pF = 279 3.9pF = 399 4.7pF = 479 5.6pF = 569 6.8pF = 689 8.2pF = 829 10pF = 100 12pF = 120 15pF = 150 18pF = 180 22pF = 220 27pF = 270 39pF = 390 47pF = 470 56pF = 560 68pF = 680 82pF = 820 Safety Front Capacitance As above EIA 100pF = 101 120pF = 121 150pF = 151 180pF = 181 220pF = 221 270pF = 271 390pF = 391 470pF = 471 560pF = 561 680pF = 681 820pF = 821 1nF = 102 1.2nF = 122 1.8nF = 182 2.2nF = 222 2.7nF = 272 3.9nF = 392 4.7nF = 472 5.6nF = 562 6.8nF = 682 8.2nF = 822 10nF = 103 15nF = 153 22nF = 223 33nF = 333 47nF = 473 100nF = 104 200nF = 204 Type 61V 61V 471M TC – Temperature coefficient. DIG – for better understanding, check pages 3 and 4. 620 65N Tolerance As above Back: (Approval marks) 28 Disc Ceramic Capacitors Packaging IDENTIFICATION AND TRACEABILITY On all TPC ceramic capacitors packages, you will find a bar code label with the following information: Lot number Manufacturing date Quantity of parts per packaging Product part number TAPED PARTS QUANTITY TABLE millimeters (inches) Rated Voltage (Vr) Diameter D Quantities Ammopack Vr