AQ149M111MAJME

RF/Microwave Capacitors RF/Microwave Multilayer Capacitors (MLC) AQ Series These porcelain and ceramic dielectric multilayer capacitor (MLC) chips are best suited for RF/ Microwave applications typically ranging from 10 MHz to 4.2 GHz. Characteristic is a fine grained, high density, high purity dielectric material impervious to moisture with heavy internal palladium electrodes. These characteristics lend well to applications requiring: 1) high current carrying capabilities; 2) high quality factors; 3) very low equivalent series resistance; 4) very high series resonance; 5) excellent stability under stresses of changing voltage, frequency, time and temperature. MECHANICAL DIMENSIONS: Case L W AQ11 A 1J 10 T AQ12 AQ13 bw AQ14 inches (millimeters) Length (L) Width (W) Thickness (T) Band Width (bw) .055±.015 (1.40±.381) .055 + .015 - .010 (1.40+ .381 - .254) .110±.020 (2.79±.508) .110 + .020 - .010 (2.79 +.889 -.254) .055±.015 (1.40±.381) .055±.015 (1.40±.381) .110±.020 (2.79±.508) .110±.010 (2.79±.508) .020/.057 (.508/1.45) .020/.057 (.508/1.45) .030/.102 (.762/2.59) .030/.102 (.762/2.59) .010 + .010 -.005 (.254 +.254 -.127) .010 + .010 -.005 (.254 +.254 -.127) .015±.010 (.381±.254) .015±.010 (.381±.254) HOW TO ORDER 11 AQ E M Case Size AVX Style J EIA Capacitance Code in pF. First two digits = significant figures or “R” for decimal place. Third digit = number of zeros or after “R” significant figures. Voltage Code 5 = 50V 1 = 100V E = 150V 2 = 200V 9 = 300V 7 = 500V Temperature Coefficient Code PACKAGING T ME Packaging* Code A = Not Applicable M = +90±20ppm/°C (AQ11/12/13/14) A = 0±30ppm/°C (AQ11/12/13/14) C = 15% (“J” Termination only) (AQ12/14) A Failure Rate Code Capacitance (See Chart) AQ 100 Capacitance Tolerance Code B = ±.1 pF C = ±.25 pF D = ±.5 pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% N = ±30% 3A = 13” Reel Unmarked ME = 7” Reel Marked RE = 13” Reel Marked WE = Waffle Pack Marked BE = Bulk Marked Termination Style Code 7 = Ag/Ni/Au (AQ11/13 only) J = Nickel Barrier Sn/Pb (60/40) - (AQ12/14 only) T = 100% Tin (AQ12/14 only) Not RoHS Compliant Standard Packaging = Waffle Pack (maximum quantity is 80) TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3). —8mm carrier —7” reel: ≤0.040” thickness = 2000 pcs ≤0.075” thickness = 2000 pcs —13” reel: ≤0.075” thickness = 10,000 pcs LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 080520 427 RF/Microwave Capacitors RF/Microwave Multilayer Capacitors (MLC) AQ Series ELECTRICAL SPECIFICATIONS AQ11, AQ12, AQ13, AQ14 M&A C Temperature Coefficient (TCC) (M) +90 ± 20 PPM/ºC ( -55ºC to +125ºC) (M) +90 ± 30 PPM/ºC ( +125ºC to +175ºC) (A) 0 ± 30 PPM/ºC ±15% (-55ºC to 125ºC) Capacitance Range (M) 0.1 pF to 1000 pF (A) 0.1 pF to 5100 pF 0.001μF to 0.1μF Operating Temperature 0.1 pF to 330 pF: from -55ºC to +175ºC 360 pF to 5100 pF: from -55ºC to +125ºC -55°C to +125°C M Dielectric A & B Case Greater than 10,000 at 1 MHz 2.5% @ 1kHz A Dielectric B Case Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz Greater than 2,000 at 1 KHz 0.1 - 200 pF 220 - 1000 pF 1100 - 5100 pF A Dielectric A Case Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz 0.1 - 100 pF 110 - 1000 pF Insulation Resistance (IR) 0.1 pF to 470 pF 106 Megohms min. @ 25ºC at rated WVDC 5 10 Megohms min. @ 125ºC at rated WVDC 510 pF to 5100 pF 105 Megohms min. @ 25ºC at rated WVDC 104 Megohms min. @ 125ºC at rated WVDC 104 Megohms min. @ 25ºC at rated WVDC 103 Megohms min. @ 125ºC at rated WVDC Working Voltage (WVDC) See Capacitance Values table See Capacitance Values table Dielectric Withstanding Voltage (DWV) 250% of rated WVDC for 5 secs (for 500V rated 150% of rated voltage) 250% of rated WVDC for 5 secs Quality Factor (Q) Aging Effects None