Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0400ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 400MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
Series
0805
Size
H
Type
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
HOW TO ORDER
LP
APPLICATIONS
•
•
•
•
•
0400
Frequency
(MHz)
A
SubType
S
Termination
TR
B
Taped &
Reel
W
L
mm (inches)
L
W
T
FINAL QUALITY INSPECTION
A
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
OUT
GND
8
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
129
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0400ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 400MHz
R.Loss
@ 400MHz
Attenuation
LP0805H0400ASTR
400MHz
-0.6dB max.
-15dB
-30dB at 800MHz
-20dB at 1200MHz
TYPICAL ELECTRICAL PERFORMANCE
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0
130
200
400
600
800
1000
1200
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
1400
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0420ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 420MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
Series
0805
Size
H
Type
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
HOW TO ORDER
LP
APPLICATIONS
•
•
•
•
•
0420
Frequency
(MHz)
A
SubType
S
Termination
TR
mm (inches)
B
Taped &
Reel
W
L
L
W
T
FINAL QUALITY INSPECTION
A
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
OUT
GND
8
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
131
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0420ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 700MHz
R.Loss
@ 700MHz
Attenuation
LP0805H0420ASTR
420MHz
-0.6dB max.
-15dB
-30dB at 840MHz
-20dB at 1260MHz
TYPICAL ELECTRICAL PERFORMANCE
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0
132
200
400
600
800
1000
1200
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
1400
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0450ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 450MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
Series
0805
Size
H
Type
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
HOW TO ORDER
LP
APPLICATIONS
•
•
•
•
•
0450
Frequency
(MHz)
A
SubType
S
Termination
mm (inches)
TR
B
Taped &
Reel
W
L
W
L
T
A
FINAL QUALITY INSPECTION
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
OUT
GND
8
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by012422
reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
133
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0450ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 700MHz
R.Loss
@ 700MHz
Attenuation
LP0805H0450ASTR
450MHz
-0.6dB max.
-15dB
-28dB at 900MHz
-20dB at 1350MHz
TYPICAL ELECTRICAL PERFORMANCE
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0
134
200
400
600
800
1000
1200
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
1400
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0470ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 470MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
LP
Series
0805
Size
H
Type
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
0470
Frequency
(MHz)
A
SubType
S
Termination
mm (inches)
TR
B
Taped &
Reel
W
L
L
W
T
A
FINAL QUALITY INSPECTION
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
GND
OUT
GND
8
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
012422products –
– rf microwave
135
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0470ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 700MHz
R.Loss
@ 700MHz
Attenuation
LP0805H0470ASTR
470MHz
-0.7dB max.
-15dB
-28dB at 940MHz
-20dB at 1410MHz
TYPICAL ELECTRICAL PERFORMANCE
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0
136
200
400
600
800
1000
1200
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
1400
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0512ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 512MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
LP
Series
0805
Size
H
Type
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
0512
Frequency
(MHz)
A
SubType
S
Termination
TR
mm (inches)
B
Taped &
Reel
W
L
L
W
T
FINAL QUALITY INSPECTION
A
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
OUT
GND
8
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
012422products –
– rf microwave
137
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0512ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 700MHz
R.Loss
@ 700MHz
Attenuation
LP0805H0512ASTR
512MHz
-0.75dB max.
-12dB
-35dB at 1024MHz
-40dB at 1536MHz
TYPICAL ELECTRICAL PERFORMANCE
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
100
138
600
1100
1600
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
013122
– rf microwave products –
2100
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0700ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
APPLICATIONS
Small size: 0805
Frequency: 700MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
0700
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
B
W
mm (inches)
L
L
W
T
FINAL QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
A
T
B
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
TERMINALS AND LAYOUT (TOP VIEW)
D
0.60±0.05
(0.024±0.002)
F
G
J
K
M
N
P
IN
Orientation
Marking
OUT
GND
2
R
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
129
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0700ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
Frequency
I.Loss
@ 700MHz
R.Loss
@ 700MHz
Attenuation
LP0805H0700ASTR
700MHz
-0.4dB max.
-20dB
-35dB at 1400MHz
-30dB at 2100MHz
-30dB at 2800MHz
TYPICAL ELECTRICAL PERFORMANCE
130
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0750ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
HOW TO ORDER
LP
0805
H
APPLICATIONS
Small size: 0805
Characteristic impedance: 50Ω
Frequency band: Band 13 746-756MHz
Operating / Storage temp: -40°C – +85°C
Low profile
Rugged construction
Taped and reeled
RoHS compliant
•
•
•
•
•
DIMENSIONS (TOP VIEW)
0750
A
S
TR
mm (inches)
B
Series
Size
Type
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
Frequency
(MHz)
SubType
Termination
W
L
Taped &
Reel
L
W
T
A
T
B
FINAL QUALITY INSPECTION
A
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR, 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.25
(0.031±0.010)
0.56±0.10
(0.022±0.004)
0.35±0.15
(0.014±0.006)
TERMINALS AND LAYOUT (TOP VIEW)
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
Orientation
Marking
OUT
GND
P
IN
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
131
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0750ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
Frequency
(MHz)
Band 13 DL
LP0805H0750ASTR
(746-756MHz)
Part Number
I.Loss
max
VSWR
max.
-0.4dB
1.7
Attenuation
(dB)
2d Harmonic 1492-1512MHz: -37dB
3d Harmonic 2238-2268MHz: -33dB
TYPICAL ELECTRICAL PERFORMANCE
132
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0780ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 780MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
0780
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
B
FINAL QUALITY INSPECTION
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINALS AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
4
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
133
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0780ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H0780ASTR
I.Loss
@ 780MHz
-0.4dB max.
R.Loss
@ 780MHz
Attenuation
-20dB
-35dB at 1560MHz
-40dB at 2340MHz
-20dB at 3120MHz
TYPICAL ELECTRICAL PERFORMANCE
134
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0942ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 942MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
0942
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
mm (inches)
F
G
J
K
M
N
P
R
D
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
TERMINALS AND LAYOUT (TOP
VIEW)
IN
Orientation
Marking
OUT
GND
6
RECOMMENDED PAD LAYOUT:
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
135
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H0942ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H0942ASTR
I.Loss
@ 942MHz
-0.4dB max.
R.Loss
@ 942MHz
Attenuation
-20dB
-35dB at 1884MHz
-40dB at 2826MHz
-35dB at 3768MHz
TYPICAL ELECTRICAL PERFORMANCE
136
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1000ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 1000MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
1000
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
Z
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
137
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1000ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H1000ASTR
I.Loss
@ 1000MHz
-0.7dB max.
R.Loss
@ 1000MHz
Attenuation
-20dB
-35dB at 2000MHz
-40dB at 3000MHz
-35dB at 4000MHz
-30dB at 5000MHz
TYPICAL ELECTRICAL PERFORMANCE
138
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1250ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 1250MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
1250
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
7
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
139
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1250ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H1250ASTR
I.Loss
@1250MHz
-0.7dB max.
R.Loss
@ 1250MHz
Attenuation
-25dB
-20dB at 1750MHz
-35dB at 2500MHz
-40dB at 3750MHz
-30dB at 5000MHz
TYPICAL ELECTRICAL PERFORMANCE
140
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1800ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 1800MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
1800
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
B
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
141
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1800ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H1800ASTR
Frequency
1800MHz
I.Loss
@1800MHz
R.Loss
@ 1800MHz
Attenuation
-25dB
-35dB at 2520MHz
-35dB at 3600MHz
-25dB at 5400MHz
-0.8dB max.
TYPICAL ELECTRICAL PERFORMANCE
142
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1900ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 1900MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
1900
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
B
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
143
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H1900ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H1900ASTR
Frequency
1900MHz
I.Loss
@1900MHz
R.Loss
@ 1900MHz
Attenuation
-20dB
-35dB at 2660MHz
-35dB at 3800MHz
-25dB at 5700MHz
-0.75dB max.
TYPICAL ELECTRICAL PERFORMANCE
144
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H2400ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 1900MHz
Sharp attenuation slope
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
2400
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
D
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
145
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H2400ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H2400ASTR
Frequency
2400MHz
I.Loss
@2400MHz
R.Loss
@ 2400MHz
Attenuation
-30dB
-30dB at 3360MHz
-25dB at 4800MHz
-30dB at 7200MHz
-0.9dB max.
TYPICAL ELECTRICAL PERFORMANCE
146
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H2900ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
Frequency: 1700-2900MHz
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
HOW TO ORDER
LP
0805
H
2900
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
RECOMMENDED PAD LAYOUT:
mm (inches)
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
OUT
K
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
M
0.54±0.25
(0.021±0.010)
N
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
F
G
J
P
R
D
GND
V
TERMINATION
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012422
– rf microwave products –
157
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H2900ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H2900ASTR
Frequency
2900MHz
I.Loss
@2900MHz
R.Loss
@ 2900MHz
Attenuation
-20dB
-30dB at 4060MHz
-30dB at 5800MHz
-35dB at 6500MHz
-1dB max.
TYPICAL ELECTRICAL PERFORMANCE
158
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
013122
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H3500ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
•
Small size: 0805
Frequency: 3500MHz
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
3500
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
R
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
149
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H3500ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H3500ASTR
Frequency
3500MHz
I.Loss
@3500MHz
R.Loss
@3500MHz
Attenuation
-20dB
-35dB at 4900MHz
-30dB at 7000MHz
-30dB at 10500MHz
-0.85dB max.
TYPICAL ELECTRICAL PERFORMANCE
150
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H4000ASTR – SMD Termination
ITF TECHNOLOGY
The ITF SMD Filter is based on thin-film multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged construction for reliable automatic
assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high
frequency wireless systems.
FEATURES
•
•
•
•
•
•
•
Frequency: 4000MHz
Characteristic impedance: 50Ohm
Operating / Storage temp: -40°C – +100°C
Low profile
Rugged construction
Taped and reeled
Power handling: 8W
HOW TO ORDER
APPLICATIONS
•
•
•
•
•
Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LAN’s
DIMENSIONS (TOP VIEW)
LP
0805
H
4000
A
S
TR
Series
Size
Type
Frequency
(MHz)
SubType
Termination
Taped &
Reel
mm (inches)
L
B
W
L
W
T
A
FINAL QUALITY INSPECTION
B
T
Finished parts are 100% tested for electrical parameters and visual/
mechanical characteristics. Each production lot is evaluated on a sample
basis for:
• Static Humidity: 85°C, 85% RH, 160 hours
• Endurance: 125°C, IR , 4 hours
2.03±0.10
(0.080±0.004)
1.55±0.10
(0.061±0.004)
0.80±0.10
(0.031±0.004)
0.56±0.25
(0.022±0.010)
0.35±0.15
(0.014±0.006)
A
TERMINATION
RECOMMENDED PAD LAYOUT:
mm (inches)
F
G
J
K
M
N
P
R
D
TERMINAL AND LAYOUT (TOP VIEW)
IN
Orientation
Marking
2.50±0.05
(0.098±0.002)
1.50±0.05
(0.059±0.002)
0.19±0.05
(0.007±0.002)
3.48±0.05
(0.137±0.002)
0.54±0.25
(0.021±0.010)
4.48±0.05
(0.776±0.002)
0.25±0.05
(0.010±0.002)
0.85±0.05
(0.033±0.002)
0.60±0.05
(0.024±0.002)
OUT
GND
3
Nickel/ Lead free Solder coating (Sn100) compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and manual.
GND
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
151
Thin-Film RF/Microwave Filters
Low Pass 0805 High Performance SMD 8W
LP0805H4000ASTR – SMD Termination
ELECTRICAL CHARACTERISTICS
P/N
LP0805H4000ASTR
Frequency
4000MHz
I.Loss
@4000MHz
R.Loss
@4000MHz
Attenuation
-20dB
-40dB at 5600MHz
-35dB at 8000MHz
-35dB at 10000MHz
-25dB at 12000MHz
-0.8dB max.
TYPICAL ELECTRICAL PERFORMANCE
152
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081320
– rf microwave products –
工商网监
湘ICP备2023018690号
