RH21

SMPS Capacitors (RH Style) RH - Surface Mount ‘J’ Lead Range 0.047 μF to 47.0 μF Low ESR/ESL 25V to 500 VDC X7R Dielectric -55ºC to +125ºC This range of uncoated MLC capacitors are processed for input and output filter capacitors in high frequency DC-DC convertor applications above 10 Watts e.g. telecomms and instrumentation, where high volume and low cost is required. These products are available in surface mount ‘J’ leaded versions and can be supplied in bulk and tape/reel packaging. ELECTRICAL SPECIFICATIONS Temperature Coefficient CECC 30 000, (4.24.1) X7R: C Temperature Characteristic - ± 15%, -55ºC to +125ºC Capacitance Test Measured at 1 VRMS max at 1KHz Dissipation Factor 25°C 2.5% max at 1KHz, 1 VRMS max Insulation Resistance 25°C 100K megohms or 1000 megohms-μF, whichever is less Dielectric Withstanding Voltage 25°C (Flash Test) 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 150% rated voltage) Life Test (1000 hrs) CECC 30 000 (4.23) 200% rated voltage at +125ºC. (500 Volt units @ 120% rated voltage) Thermal Shock IEC 68.2.14 -55ºC to +125ºC, 5 cycles Resistance to Solder Heat IEC 68.2.20 Typical ESR (mΩ) 3 μF, 100V X7R ESR @ 100KHz ESR @ 500KHz ESR @ 1MHz 17 12 14 DIMENSIONS Style RH21 RH22 RH31 RH32 RH41 RH42 RH51 RH52 RH61 RH62 millimeters (inches) H max S ± 0.1 (±0.004) h 1.50 ±0.30 (0.059 ±0.012) 1.50 ±0.30 (0.059 ±0.012) 1.78 ±0.25 (0.070 ±0.010) 1.78 ±0.25 (0.070 ±0.010) 1.60 ±0.10 (0.062 ±0.004) 1.60 ±0.10 (0.062 ±0.004) 1.60 ±0.10 (0.062 ±0.004) 1.60 ±0.10 (0.062 ±0.004) 1.60 ±0.10 (0.062 ±0.004) 1.60 ±0.10 (0.062 ±0.004) L max 7.62 (0.300) 7.62 (0.300) 7.62 (0.300) 7.62 (0.300) 9.20 (0.362) 9.20 (0.362) 10.7 (0.421) 10.7 (0.421) 14.9 (0.586) 14.9 (0.586) W max No. of leads per side 2 2 3 3 3 3 4 4 5 5 5.40 (0.213) 4.60 (0.181) 2.50 (0.098) 5.40 (0.213) 7.50 (0.295) 2.50 (0.098) 7.00 (0.270) 5.08 (0.200) 5.08 (0.200) 7.00 (0.270) 8.13 (0.320) 5.08 (0.200) 8.70 (0.342) 4.90 (0.192) 5.08 (0.200) 8.70 (0.342) 8.20 (0.323) 5.08 (0.200) 10.7 (0.421) 4.90 (0.192) 7.62 (0.300) 10.7 (0.421) 8.20 (0.323) 7.62 (0.300) 13.6 (0.535) 4.90 (0.192) 10.2 (0.400) 13.6 (0.535) 8.20 (0.323) 10.2 (0.400) DIMENSIONS millimeters (inches) L Max. W Max. 0.6 (0.024) ±0.1 (0.004) M1 H Max. h 2.54 (0.100) ±0.05 (0.002) Non-Accum. Bend Radius 90° ±5° S 1.4 (0.055) Typ. 1.65 (0.065) ±0.15 (0.006) M1 = M2 ±0.5 (0.020) M2 0.25 (0.010)Typ. 46 SMPS Capacitors (RH Style) RH - Surface Mount ‘J’ Lead Range X7R STABLE DIELECTRIC RH21/RH22 Style Cap μF 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.78 0.82 1 1.2 1.5 1.8 2.2 3 3.3 3.9 4.7 6.8 8.2 10 12 15 18 22 33 47 25 50 100 200 500 50 RH31/RH32 Style 100 200 RH41/RH42 Style Voltage DC 500 50 100 200 500 50 RH51/RH52 Style 100 200 500 50 RH61/RH62 Style 100 200 500 RH31 RH32 RH31 RH41 RH32 RH31 RH31 RH32 RH21 RH32 RH42 RH21 RH22 RH41 RH42 RH41 RH42 RH41 RH42 RH51 RH52 RH51 RH62 RH52 RH61 RH61 RH62 RH51 RH51 RH61 RH62 RH61 RH62 RH21 RH22 RH52 RH22 RH52 For availability of further parts in the RH21/RH22 Series, contact manufacturing. PACKAGING Style RH21 RH22 RH31 RH32 RH41 RH42 RH51 RH52 RH61 RH62 Qty/Reel 13" 800 500 800 500 800 see note 750 see note 500 see note Max. Qty/Waffle Pack 270 270 108 108 108 100 88 88 42 42 Note: T&R is not yet available. Contact manufacturing for further information as this will be available in the future. HOW TO ORDER RH 31 5 C 225 M A Specification Code A = Non customized 3 Package Code 3 = Waffle Pack A = Tape & Reel 0 Lead Dia. Code A 3 Style Size Voltage Dielectric Capacitance Capacitance Code Code Code Code Code Tolerance 3 = 25V C = X7R (2 significant K = ±10% (see table above) 5 = 50V 1 = 100V 2 = 200V 7 = 500V digits + no. of zeros) eg. 105 = 1 μF 104 = 0.1 μF M = ±20% Lead Space Lead Style Code Code 3 = ‘J’ Lead 0 = Standard A = Standard R = RoHS Compliant 47