AZ2270-1A-12DF

AZ2270 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • • Quick-connect leads for contacts 1 Form A, B and C contacts available AC and DC coils available High dielectric strength version available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 TÜV pending GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. 15 msec max. at nominal coil voltage 10 msec max. at nominal coil voltage (without suppression) 1500 Vrms contact to contact 2500 Vrms contact to coil 4000 Vrms contact to coil (“T” version) 1000 megohms min. at 20°C, 500 VDC 50% RH DC: > 10% of nominal coil voltage AC: > 20% of nominal coil voltage -55°C (-67°F) to 85°C (185°F) -55°C (-67°F) to 155°C (311°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C., Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. CONTACTS Arrangement Ratings SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 840 W or 8310 VA Max. switched current: 30 A (Form A) 15 A (Form B) Max. switched voltage: 277 VAC, 28 VDC UL, CUR 1 Form A 30 A at 277 VAC, General Use [1][2] 2 Hp at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 30 A at 28 VDC [1] 20/60 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form B 15 A at 277 VAC, General Use [1] 10 A at 28 VDC [1] 0.5 HP at 250 VAC [1] 0.25 HP at 125 VAC [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form C 30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2] 20/10 A (N.O./N.C.) at 28 VDC[1] 2/0.5 HP (N.O./N.C.) at 250 VAC[1][2] 1/0.25 HP (N.O./N.C.) at 125 VAC[1][2] 20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1] Material Resistance Silver cadmium oxide [1], silver tin oxide [2] < 50 milliohms initially (24 V, 1 A voltage drop method) Operate Time Release Time Dielectric Strength (at sea level for 1 min.) Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 36 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Max. Temperature DC: 500 mW AC: 1.4 VA DC: 1.7 W at 20°C AC: 2.7 VA at 20°C 155°C (311°F) Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 9/26/06W AZ2270 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 5 6 9 12 15 18 24 48 70 110 Must Operate VDC 3.75 4.50 6.75 9.0 11.3 13.5 18.0 36.0 52.0 82.5 Max. Continuous VDC 6.4 7.8 12.2 15.4 19.8 24.1 32.0 62.6 93.0 146.0 Nominal Current mA ± 10% 185 150 93 77 59 47 36 19 27 20 Coil Resistance ± 10% 27 40 97 155 256 380 660 2,560 5,500 13,450 ORDER NUMBER* AZ2270–1A–5DF AZ2270–1A–6DF AZ2270–1A–9DF AZ2270–1A–12DF AZ2270–1A–15DF AZ2270–1A–18DF AZ2270–1A–24DF AZ2270–1A–48DF AZ2270–1A–70DF AZ2270–1A–110DF COIL SPECIFICATIONS – AC Coil 50/60 Hz Nominal Coil VAC 12 24 120 208 220/240 277 Must Operate VAC 10.2 20.4 102.0 166.0 187.0 220.0 Max. Continuous VAC 13.8 27.6 138.0 239.0 276.0 318.0 Nominal Coil Power VA 2.3 2.1 2.3 2.2 2.2/2.6 2.2 Coil Resistance ± 10% 25 100 2,500 11,000 13,490 15,000 ORDER NUMBER* AZ2270–1A–12AF AZ2270–1A–24AF AZ2270–1A–120AF AZ2270–1A–208AF AZ2270-1A–240AF AZ2270-1A–277AF *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “ -1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. For 4000 Vrms dielectric strength change “F” to “TF.” MECHANICAL DATA 1.083 [27.50] 0.130 [3.30] 1.094 [27.80] .240 [6.10] 0.398 [10.10] 1.276 [32.40] 0.906 [23.00] 0.299 [7.60] .130 [3.30] 2x .032 x .062 [0.81 x 1.57] .045 SQ [1.14 SQ] 0.339 [8.60] 2 x .025 SQ [0.64 SQ] PC BOARD LAYOUT .150 [3.81] .700 [17.78] 3 x ø.082 [ ø.2.10] WIRING DIAGRAMS 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 3 3 1 FORM C (SPDT) .400 [10.16] .900 [22.86] .300 [7.62] 2 4 4 2 4 2 x ø.043 [ø1.10] 1 5 1 5 1 5 .400 [10.16] VIEWED TOWARDS TERMINALS VIEWED TOWARDS TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 9/26/06W