AZ2280-1A-6DF

AZ2280 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Quick-connect leads for contacts and coil 1 Form A, B and C contacts available AC and DC coils available Expoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 TÜV pending GENERAL DATA CONTACTS Arrangement Ratings SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 840 W or 8310 VA Max. switched current: 30 A (Form A) 15 A (Form B) Max. switched voltage: 277 VAC, 28 VDC UL, CUR 1 Form A 30 A at 277 VAC, General Use [1][2] 2 Hp at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 30 A at 28 VDC [1] 20/60 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form B 15 A at 277 VAC, General Use [1] 10 A at 28 VDC [1] 0.5 HP at 250 VAC [1] 0.25 HP at 125 VAC [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form C 30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2] 20/10 A (N.O./N.C.) at 28 VDC[1] 2/0.5 HP (N.O./N.C.) at 250 VAC[1][2] 1/0.25 HP (N.O./N.C.) at 125 VAC[1][2] 20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1] Material Resistance Silver cadmium oxide [1], silver tin oxide [2] < 50 milliohms initially (24 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals 1000 megohms min. at 500 VDC, 20°C 50% RH DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage -55°C (-67°F) to 85°C (185°F) -55°C (-67°F) to 155°C (311°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 36 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 500 mW AC: 1.4 VA DC: 1.7 W at 20°C (68°F) AC: 2.7 VA at 20°C (68°F) 38°C (68°F) Max. 155°C (311°F) Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 6/13/06W AZ2280 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 5 6 9 12 15 18 24 48 110 Nominal Coil VAC 12 24 120 208 220/240 277 Must Operate VDC 3.75 4.50 6.75 9.00 11.25 13.5 18.00 36.00 82.5 Must Operate VAC 10.2 20.4 102.0 176.8 187.0 235.4 Max. Continuous VDC 6.4 7.8 12.2 15.4 19.8 24.1 32.0 62.6 146.6 Max. Continuous VAC 13.8 27.6 138.0 239.0 276.0 318.5 Nominal Current mA ± 10% 185 150 93 77 59 47 36 19 8.2 Nominal Coil Power VA 2.3 2.1 2.3 2.2 2.2/2.6 2.2 Coil Resistance ± 10% 27 40 97 155 256 380 660 2560 13450 Coil Resistance ± 10% 25 100 2,500 11,000 13,490 15,000 ORDER NUMBER* AZ2280–1A–5DF AZ2280–1A–6DF AZ2280–1A–9DF AZ2280–1A–12DF AZ2280–1A–15DF AZ2280–1A–18DF AZ2280–1A–24DF AZ2280–1A–48DF AZ2280-1A-110DF COIL SPECIFICATIONS – AC Coil 50/60 Hz ORDER NUMBER* AZ2280–1A–12AF AZ2280–1A–24AF AZ2280–1A–120AF AZ2280–1A–208AF AZ2280–1A–240AF AZ2280–1A–277AF *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. For 0.110 coil terminals change “F” to “KF.” MECHANICAL DATA 1.08 (27.5) 0.25 x 0.032 ±0.003 3 places 1.09 (27.8) 1.27 (32.4) 1.98 1.71 (50.2) (43.5) 0.187 x 0.02* ±0.003 2 places 0.14 (3.5) * "K" = 0.110 x .02 WIRING DIAGRAM (Top View) 3 2 4 2 3 2 4 1 5 1 5 1 5 1 FORM A 1 FORM B 1 FORM C Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 6/13/06W