AZ2800-2C-120A

AZ2800 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Meets Class F construction Epoxy sealed versions available UL, CUR file E44211, VDE 40023442 CONTACTS GENERAL DATA Arrangement Ratings DPST-N.O. DPDT Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current:30 A N.O, 3 A N.C. Max. switched voltage: 600 VAC or 30 VDC* UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 30k cycles Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression) UL, CUR 3 A at 277 VAC General Use, 100k cycles N.C. VDE N.O. 20A 250VAC, N.C. 3A 250VAC *Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory. Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40°C (-40°F) to 95°C (203°F) AC: -40°C (-40°F) to 75°C (167°F) -40°C (-40°F) to 155°C (311°F) 0.062" DA at 10–55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Quick connect tabs Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Material Resistance Silver cadmium oxide, silver tin oxide