AZ8222-2C-6DSE

AZ8222 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Bifurcated crossbar contacts Ultra-sensitivity, 84 mW pickup Life expectancy to 10 million operations High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 GENERAL DATA DPDT (2 Form C) Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 120 VDC or 240 VAC Rated Load UL Material Resistance 2.0 A at 30 VDC 1.0 A at 125 VAC Silver nickel, gold plated < 50 milliohms initially Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 2.0 A 30 VDC Res. 6 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms between open contacts 1500 Vrms contact set to contact set Insulation Resistance Dropout 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) standard -40°C (-40°F) to 80°C (176°F) sensitive -40°C (-40°F) to 85°C (185°F) ultra-sensitive -40°C (-40°F) to 105°C (221°F) 1.5 mm DA at 10–55 Hz 50 g 11 ms 1/2 sine P.B.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 5 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise 180 mW standard 100 mW sensitive 84 mW ultra-sensitive 1.2 W at 20°C (68°F) 34°C (61°F) standard 23°C (41°F) sensitive 19°C (34°F) ultra-sensitive Max. 105°C (221°F) Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Temperature Max. Solder Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. Max. Solvent Temp. Max. Immersion Time Weight 12/17/03W AZ8222 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Nominal Coil VDC 3 4.5 5 6 9 12 15 24 48 Nominal Coil VDC 3 4.5 5 6 9 12 15 24 Nominal Coil VDC 3 4.5 5 6 9 12 15 Max. Continuous VDC 4.5 6.0 8.0 10.0 14.5 18.5 22.0 35.5 56.0 Max. Continuous VDC 6.0 9.0 10.0 12.0 18.0 24.0 30.0 48.0 Max. Continuous VDC 7.0 10.4 11.5 13.8 20.8 27.7 34.6 Coil Resistance ± 10% 30 63 90 130 280 450 625 1600 4000 Coil Resistance ± 10% 45 101 125 180 405 720 1125 2880 Coil Resistance ± 10% 60 135 167 240 540 960 1500 Must Operate VDC 2.3 3.2 3.8 4.5 6.8 9.0 11.3 18.0 36.0 Must Operate VDC 2.3 3.2 3.8 4.5 6.8 9.0 11.3 18.0 Must Operate VDC 2.3 3.2 3.8 4.5 6.8 9.0 11.3 ORDER NUMBER AZ8222–2C–3DME AZ8222–2C–4.5DME AZ8222–2C–5DME AZ8222–2C–6DME AZ8222–2C–9DME AZ8222–2C–12DME AZ8222–2C–15DME AZ8222–2C–24DME AZ8222–2C–48DME SENSITIVE COIL SPECIFICATIONS ORDER NUMBER AZ8222–2C–3DSE AZ8222–2C–4.5DSE AZ8222–2C–5DSE AZ8222–2C–6DSE AZ8222–2C–9DSE AZ8222–2C–12DSE AZ8222–2C–15DSE AZ8222–2C–24DSE ULTRA-SENSITIVE COIL SPECIFICATIONS* ORDER NUMBER AZ8222–2C–3DSSE AZ8222–2C–4.5DSSE AZ8222–2C–5DSSE AZ8222–2C–6DSSE AZ8222–2C–9DSSE AZ8222–2C–12DSSE AZ8222–2C–15DSSE * Contact to contact dielectric strength is 500 Vrms. MECHANICAL DATA 0.795MAX [20.2] 0.394MAX [10.0] PCB Layout 8X Ø 0.035 [ Ø 0.9] 0.453MAX [11.5] 0.118 [3.0] 0.300 [7.62] 0.047 [1.2] 0.300 [7.62] 0.500 [12.7] 0.700 [17.78] 0.024 [0.6] 0.016 [0.4] 0.300 [7.62] 0.047 [1.2] 0.300 [7.62] 0.500 [12.7] 0.700 [17.78] Wiring Diagram 1 4 6 8 16 13 1 9 Viewed toward bottom Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/17/03W