AZ8461P2-1.5

AZ8461 AZ MICROMINIATURE POLARIZED RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • High dielectric and surge voltage: 2.5 KV surge (per Bellcore TA–NWT–001089) 1.5 KV surge (per FCC Part 68) 1,000 Vrms, open contacts • Monostable and bistable (latching) versions available • Low power consumption: 79 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed for automatic wave soldering and cleaning • UL file E43203; CSA file 700339 • All plastics meet UL94 V–0, 30 min. oxygen index CONTACTS Arrangement Ratings DPDT (2 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 60 W or 62.5 VA Max. switched current: 2.0 A Max. switched voltage: 220 VDC or 250 VAC Rated Load UL/CSA Material Resistance 0.5 A at 125 VAC 2.0 A at 30 VDC Silver palladium (movable) Silver palladium, gold plated (stationary) < 50 milliohms initially at 6 V, 1 A Dielectric Strength (at sea level) Dropout Insulation Resistance GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Bounce (typical) Capacitance Minimum operations 1 x 108 at 3Hz 1 x 105 at 0.5 A, 125 VAC, Res. 2 x 105 at 1.0 A, 30 VDC, Res. 3 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression) At 10 mA contact current 1 ms at operate or release < 1.5 pF at 10 KHz (open contacts, adjacent contacts) < 2 pF at 10 KHz (contact to coil) See table Greater than 10% of nominal coil voltage 109 ohms min. at 25°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 95°C (203°F) (3–12 VDC) -40°C (-40°F) to 90°C (194°F) (24 VDC) -40°C (-40°F) to 85°C (185°F) (48 VDC) -40°C (-40°F) to 115°C (239°F) Operational, 20 g, 10–55 Hz Non-destructive, 30 g, 10–55 Hz Operational, 50 g min., 11 ms Non-destructive, 100 g min., 11 ms 260°C (500°F) for 5 seconds 80°C (176°F) 30 seconds 1.5 grams P.B.T. polyester Tinned copper alloy, P.C. COIL (Polarized) Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise 79 mW (3–12 VDC) 113 mW (24 VDC) Ambient Temperature Operating Storage 0.8 W at 20°C (68°F) At nominal coil voltage 20°C (36°F) (3–12 VDC) 30°C (54°F) (24 VDC) Max. 115°C (239°F) Vibration Shock Max. Solder Temp. Time Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. 4/30/04W AZ8461 AZ RELAY ORDERING DATA STANDARD VERSION Nominal Coil VDC 1.5 3 4.5 5 6 9 12 18 24 Nominal Coil VDC 1.5 3 4.5 5 6 9 12 18 24 Nominal Coil VDC 1.5 3 4.5 5 6 9 12 18 24 Max. Continuous VDC 3.6 7.2 10.8 12.0 14.4 21.6 28.8 36.0 48.0 Max. Continuous VDC 4.2 8.5 12.7 14.1 17.0 25.5 33.9 41.6 55.4 Max. Continuous VDC 3.0 6.0 9.0 10.0 12.0 18.0 24.0 29.4 39.2 Coil Resistance ± 10% 16.1 64.3 145 178 257 579 1028 1620 2880 Coil Resistance ± 10% 22.5 90 203 250 360 810 1440 2160 3840 Coil Resistance ± 10% 11.25 45 101 125 180 405 720 1080 1920 Must Operate VDC 1.13 2.25 3.38 3.75 4.50 6.75 9.00 13.50 18.00 Set Voltage 1.13 2.25 3.38 3.75 4.50 6.75 9.00 13.50 18.00 Set/Reset Voltage 1.13 2.25 3.38 3.75 4.50 6.75 9.00 13.50 18.00 ORDER NUMBER AZ8461–1.5 AZ8461–3 AZ8461–4.5 AZ8461–5 AZ8461–6 AZ8461–9 AZ8461–12 AZ8461–18 AZ8461–24 SINGLE COIL LATCHING VERSION ORDER NUMBER AZ8461P1–1.5 AZ8461P1–3 AZ8461P1–4.5 AZ8461P1–5 AZ8461P–-6 AZ8461P1–9 AZ8461P1–12 AZ8461P1–18 AZ8461P1–24 DUAL COIL LATCHING VERSION ORDER NUMBER AZ8461P2–1.5 AZ8461P2–3 AZ8461P2–4.5 AZ8461P2–5 AZ8461P2–6 AZ8461P2–9 AZ8461P2–12 AZ8461P2–18 AZ8461P2-24 INITIAL DIELECTRIC STRENGTH (minimum) VRMS, 1 min. 1,000 1,000 1,500 (1000(1)) Peak (V) 1,500 1,500 2,500 (1500(1)) SURGE Rise Time (µS) 10 2 2 Decay Time* (9µS) (1/2 peak) 160 160 10 Between open contacts Between contact sets Between coil and contacts (1) Dual coil * Decay time measured from beginning of surge. 4/30/04W AZ8461 Mechanical Data Non-latching type Single coil latching type .59 [15.0 .30 [7.5] ORIENTATION MARK 1 3 4 5 .59 [15.0] Ø.031 Ø0.8] (-) .39 [9.8] (+) .30 [7.5] .200 [5.08] Reset Set (-) 12 10 9 8 .118 [3.0] 0.20 [0.5] .043 [1.1] .200 [5.08] .100 [2.54] .008 [0.2] Deenergized or reset condition .046 [1.16] .200 [5.08] .043 [1.1] .046 [1.16] .200 [5.08] .100 1 [2.54] Wiring Diagram Viewed toward terminals PC Board Layout Viewed toward terminals Double coil latching type .59 [15.0] .30 [7.5] ORIENTATION MARK .59 [15.0] 1 3 4 5 6 10- Ø .031 [ Ø 0.8] (+) .39 [9.8] (+) Reset (-) 12 10 9 8 7 Set (-) .30 [7.5] .200 [5.08] .118 [3.0] 0.20 [0.5] .043 [1.1] [5.08] .100 [2.54] [2.54] [2.54] .008 [0.2] .043 [1.1] [1.16] .200 [5.08] [2.54] .100 [2.54] .100 [2.54] .046 [1.16] .200 [5.08] Wiring Diagram Viewed toward terminals PC Board Layout Viewed toward terminals Maximum Switching Capacity 2.0 Cont. Current 1.0 0.5 AC RESISTIVE LOAD 0.3 DC RESISTIVE LOAD 0.1 0 30 100 200 Contact Voltage 4/30/04W