AZ943H-1CT-48D

AZ943H 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • • High performance Low seated height 4.5 kV surge withstand Flux tight and sealed versions available Class B insulation (130°C) standard Class F insulation (155°C) available UL, CUR File E43203 GENERAL DATA Life Expectancy Mechanical Electrical 1 x 107 1 x 105 at 10 A 277 VAC Res. 10 ms max. 5 ms max. (with no coil suppression) CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form A 15 A at 125 VAC, general use 10A at 277 VAC, general use, 100,000 cycles TV - 5 120 VAC 1/2 HP at 125 VAC 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) 1 Form C 10 A at 277 VAC, general use, 100,000 cycles 1/2 HP at 125 VAC N.O. 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) 10 A/7A N.O./N.C. at 30 VDC resistive Material Resistance Silver tin oxide (gold plating available) Operate Time Release Time Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 90°C(194°F) Class B -40°C(-40°F) to 110°C(230°F) Class F -40°C(-40°F) to 130°C(266°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 g UL/CUR < 100 milliohms initially (24 V, 1 A method) Terminals Max. Solder Temp. Max. Solder Time COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise Temperature 203 mW 1.8 W at 20°C (68°F) Class B 2.4 W at 20°C (68°F) Class F 32°C (58°F) at nominal coil voltage Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 12/22/08 AZ943H RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 48 Must Operate VDC 3.8 4.5 6.8 9.0 13.5 18.0 36.0 Max Continuous VDC 11.2 13.4 20.1 26.8 40.2 53.4 107.3 Coil Resistance ±10% 70 100 225 400 900 1,600 6,400 ORDER NUMBER* AZ943H–1CT–5D AZ943H–1CT–6D AZ943H–1CT–9D AZ943H–1CT–12D AZ943H-1CT-18D AZ943H–1CT–24D AZ943H–1CT–48D * Substitute “1AT” in place of “1CT” to indicate 1 Form A contact. Add suffix “E” for epoxy sealed versions. Add suffix “G” for gold plated contacts. To indicate Class F version, add suffix “F”. MECHANICAL DATA Outline Dimensions .758 MAX [19.25] .610 MAX [15.49] PC Board Layout 5XØ.051 [Ø1.30] .134 [3.40] .059 [1.49] .628 MAX [15.95] .185 [4.70] .017 [0.43] .472 [12.00] .236 [6.00] .480 [12.20] .559 [14.20] 4x.016 [0.40] .014 [0.36] 4x.032 [0.80] .039 [1.00] VIEWED TOWARD TERMINALS Wiring Diagram 3 2 2 3 5 FORM "A" 5 FORM "C" 4 VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/22/08