AZ960-1C-6D

AZ960 MINIATURE POWER RELAY FEATURES • • • • • • 1 Form A or 1 Form C Standard and sensitive coils High in-rush capability All plastics rated 94V-0 UL, CUR file E44211 Epoxy sealed version available CONTACTS Arrangement Ratings SPST NO (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 30 VDC or 250 VAC UL, CUR 5 A at 250 VAC 1/10 GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at rated load 10 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) HP 125, 250 VAC Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 750 Vrms contact to contact Insulation Resistance Dropout 1000 megohms min. at 500 VDC, 20°C, 50% RH Greater than 5% of nominal coil voltage Minimum Load Material Resistance 5 VDC, 0.1 A Silver alloy < 100 milliohms initially (24 V, 1 A voltage drop method) Ambient Temperature Operating Standard: 40°C (-40°F) to 75°C (167°F) Sensitive: 40°C (-40°F) to 80°C (176°F) Storage Vibration 40°C (-40°F) to 105°C (221°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 250°C (482°F) 5 seconds 80°C (176°F) 30 seconds 8 grams COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Standard coil: 176 mW Sensitive coil: 129 mW 1.3 W at 20°C (68°F) 0.9 W at 40°C (104°F) At nominal coil voltage: Standard coil: 31°C (56°F) Sensitive coil: 23°C (41°F) 105°C (221°F) Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Max. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight Rev. 7/10/97 AZ960 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 14 18 24 48 Must Operate VDC 3.5 4.2 6.3 8.4 9.8 12.6 16.8 33.6 Max. Continuous VDC 9.5 11.4 17.1 22.8 26.6 34.2 45.6 91.2 Coil Resistance ±10% 69 100 225 400 544 900 1600 6400 ORDER NUMBER* AZ960–1C–5D AZ960–1C–6D AZ960–1C–9D AZ960–1C–12D AZ960–1C–14D AZ960–1C–18D AZ960–1C–24D AZ960–1C–48D SENSITIVE RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 14 18 24 48 Must Operate VDC 3.6 4.3 6.5 8.6 10.1 13.0 17.3 34.7 Max. Continuous VDC 11.4 13.7 20.6 27.3 32.0 41.1 54.3 109.5 Coil Resistance ±10% 100 145 325 575 790 1300 2310 9220 ORDER NUMBER* AZ960–1C–5DS AZ960–1C–6DS AZ960–1C–9DS AZ960–1C–12DS AZ960–1C–14DS AZ960–1C–18DS AZ960–1C–24DS AZ960–1C–48DS *Add suffix “E” for epoxy sealed version. Substitute “1A” in place of the “1C” to indicate 1 Form A. MECHANICAL DATA .807 (20.5) .413 (10.5) Term. No. Dimensions Tol.: ±0.005(0.13) 2, 3 .807 (20.5) 1, 4 5 .134 (3.4) .20 .50 (5.08) (12.70) .54 (1.36) .54 (1.36) .20 (5.08) .10 (2.54) 0.024 X 0.024 (0.6 X 0.6) 0.016 X 0.024 (0.4 X 0.6) 0.010 X 0.032 (0.25 X 0.8 ) .20 (5.08) .10 (2.54) .10 (2.54) .10 (2.54) .50 (12.7) .30 (7.62) .0571 (1.44) .054 (1.36) PC BOARD LAYOUT .047 (1.2) 3 places .039 (1.0) 2 places .039 (1.0) 2 places WIRING DIAGRAM 1 NC COM NO 4 3 4 2 1 COM NO 3 .047 (1.2) 2 places .20 (5.08) 2 .30 (7.62) .10 (2.54) .50 (12.7) .057 (1.44) .054 (1.36) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" Viewed toward terminals Rev. 7/10/97