AZ9621-1A-6D

AZ9621 10 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • • Extremely low cost Epoxy sealed version available High temperature (105°C) version available Creepage/Clearance 4mm/3mm Class F insulation (155°C) standard UL, CUR file E44211 VDE file pending GENERAL DATA Life Expectancy Mechanical Electrical 5 x 106 5 x 104 at 10 A 250 VAC Res. CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 2500 VA Max. switched current: 10 A AC Max. switched voltage: 250 VAC 1 Form A (standard temperature version) 10 A at 250 VAC, General Purpose, 50k cycles 1 Form A (high temperature version) 10 A at 250 VAC, General Purpose, 30k cycles 1 Form C (standard temperature version) 10 A (N.O.), 5 A (N.C.) at 250 VAC, General Purpose, 30k cycles 1 Form C (high temperature version) 10 A (N.O.), 4 A (N.C.) at 250 VAC, General Purpose, 30k cycles VDE (pending) Operate Time (Typical) 15 ms Release Time (Typical) 15 ms (with no coil suppression) Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Immersion Time 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Std. Temp. -40°C (-40°F) to 105°C (221°F) High Temp. -40°C (-40°F) to 155°C (311°F) >4g at 30-400 Hz >10g (functional) >30g (destructive) P.E.T. polyester Tinned copper alloy, P.C. 260°C (500°F) 5 seconds 30 seconds 5.6 g UL/CUR 1 Form A 10 A at 250 VAC, 30k cycles 1 Form C 10 A (N.O.), 4 A (N.C.) at 250 VAC, 30k cycles Silver nickel < 100 milliohms initially (24 V, 1 A method) Material Resistance COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise Temperature 200 mW 1.8 W at 20°C (68°F) 33°C (59.4°F) at nominal coil voltage Max. 155°C (311°F) Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 9/28/05W AZ9621 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 22 24 36 Max. Continuous VDC 8.0 10.0 14.5 18.5 26.0 34.0 35.5 53.3 Coil Resistance ±10% 70 100 225 400 900 1345 1600 3600 Must Operate VDC 3.75 4.50 6.75 9.00 13.50 16.5 18.0 27.0 ORDER NUMBER* 1 Form A AZ9621–1A–5D AZ9621–1A–6D AZ9621–1A–9D AZ9621–1A–12D AZ9621–1A–18D AZ9621–1A–22D AZ9621–1A–24D AZ9621–1A–36D 1 Form C AZ9621–1C–5D AZ9621–1C–6D AZ9621–1C–9D AZ9621–1C–12D AZ9621–1C–18D AZ9621–1C–22D AZ9621–1C–24D AZ9621–1C–36D * Add suffix “E” for epoxy sealed version. Add suffix “K” for high temperature version. MECHANICAL DATA Form A .601 MAX [15.25] .601 MAX [15.25] Form C .601 MAX [15.25] .601 MAX [15.25] Wiring Diagram 2 5 1 3 .797 MAX [20.25] .797 MAX [20.25] Form A .150 [3.80] .020 [0.50] .020 [0.50] .012 [0.30] .039 [1.00] .150 [3.80] .020 [0.50] .020 [0.50] .012 [0.30] .039 [1.00] .197 [5.00] 2 4 5 1 3 Form C .295 [7.50] .394 [10.00] .295 [7.50] .197 [5.00] .246 [6.25] .197 [5.00] .246 [6.25] .197 [5.00] .049 [1.25] Viewed toward terminals TERMINAL DISTANCE TERMINAL DISTANCE Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 9/28/05W