AZ9741-1C-6D

AZ9741 40 AMP MINI-ISO AUTOMOTIVE RELAY FEATURES • • • • • • • • PCB terminals 40 Amp contact rating High operating temperature (125°C) Resistor or diode parallel to coil available Epoxy sealed versions available SPST (1 Form A), SPDT (1 Form C) ISO/TS 16949, ISO14001 Tested in accordance with SAE J2544 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 630 W (SPST) 630 W (N.O.) 473 W (N.C.) Max. switched current: 40 A (SPST) 40 A (N.O.) 30 A (N.C.) Max. switched voltage: 75 VDC Material Resistance Silver tin oxide < 100 milliohms initially (6V, 1 A voltage drop method) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 40 A 14 VDC Res. 7 ms at nominal coil voltage 5 ms at nominal coil voltage Dielectric Strength 500 Vrms coil to contact (at sea level for 1 min.) 500 Vrms contact to contact Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 100 megohms min. at 500 VDC, 20°C 50% RH Greater than 10% of nominal coil voltage -55°C (-67°F) to 125°C (257°F) -55°C (-67°F) to 200°C (392°F) 0.062" DA at 10-40 Hz 15 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 secomds 31 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 0.68 W Shock Enclosure Terminals 4.8 W at 20°C (68°F) 75°C (135°F) at nominal coil voltage Max. 200°C (392°F) Max. Solder Temp. Max. Solder Time Max Solvent Temp. Max Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 5/30/07W AZ9741 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil Must Operate Max. Continuous Coil Resistance VDC VDC VDC ± 10% 6 3.9 10.1 22.5 12 7.8 20.2 90 24 15.6 40.5 360 *Add suffix “E” for epoxy sealed version. Add suffix “R” for resistor across coil (6V=180 ohms, 12V=680 diode across coil (anode on #85). ORDER NUMBER* SPST AZ9741–1A–6D AZ9741–1A–12D AZ9741–1A–24D ohms, 24V=2700 ohms). SPDT AZ9741–1C–6D AZ9741–1C–12D AZ9741–1C–24D Add suffix D2 for MECHANICAL DATA Outline Dimensions PC Board Layout 4x.055 [1.40] PCB Version 30 1.043MAX [26.50] 1.043MAX [26.50] 5x.102 [2.60] 85 .331 [8.40] 87 .661 [16.80] 86 .705 [17.90] 0.965MAX [24.50] FORM A 4x.055 [1.40] .031 [0.80] .098 [2.50] 5x.102 [2.60] .083 [2.1] .248 [6.30] .126 [3.20] .390 [9.90] 85 30 .374 [9.50] 87a 86 Wiring Diagrams 86(+) 87 30 85(-) 30 85(-) 86(+) 87a 30 85(-) 5x.102 [2.60] .662 [16.8] 86(+) 87a 87 FORM B 5x.055 [1.40]] 30 FORM A FORM B FORM C .331 [8.40] 85 87a 86 .705 [17.90] .315 [8.00] 87 .661 [16.80] FORM C Viewed Toward Terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/30/07W