AZ991-1CH-48D

AZ991 MINIATURE PC BOARD RELAY FEATURES • • • • • • • • Contacts rated at 3, 5 or 10 Amps Meets FCC Part 68.302 1500 lightning surge Meets FCC Part 68.304 1000 V dielectric 0.240" (6.1 mm) min. between coil and contact Low cost DC coils to 48 VDC Flux-tight available UL, CUR file E44211 GENERAL DATA Life Expectancy Mechanical Electrical SPDT (1 Form C) (Form A available on request) Resistive load: Max. switched power: 90 W or 831 VA Max. switched current: 3 A Max. switched voltage: 30 VDC or 277 VAC UL Rating: 3 A at 30 VDC or 277 VAC Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 30 VDC or 277 VAC UL Rating: 5 A at 30 VDC or 277 VAC 1/10 HP 277 VAC Max. switched power: 300 W or 1250 VA Max. switched current: 10 A Max. switched voltage: 30 VDC or 125 VAC UL Rating: 5 A at 30 VDC or 10 A 125 VAC Silver cadmium oxide < 100 milliohms initially Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 10 A 120 VAC Res. 6 ms at nominal coil voltage 2 ms at nominal coil voltage CONTACTS Arrangement Ratings Light Duty Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 750 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 1000 V dielectric Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals 100 megohms min. at 500 VDC, 20°C 50% RH Greater than 10% of nominal coil voltage -40°C (-13°F) to 70°C (158°F) -55°C (-67°F) to 105°C (221°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (500°F) 5 seconds 80°C (176°F) 30 seconds 10 grams Medium Duty Heavy Duty Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 256 mW 1.1 W at 20°C (68°F) ambient 0.86 W at 40°C (104°F) ambient 30°C (54°F) at nominal coil voltage Max. 105°C (267°F) Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. 2. 3. 4. 5. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed version available upon request. Tape should be pulled off after wave solder and cleaning. Specifications subject to change without notice. 12/15/03W AZ991 RELAY ORDERING DATA STANDARD RELAYS: Light Duty (3 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Max. Continuous VDC 8.4 10.0 15.1 20.2 40.3 80.7 Coil Resistance ± 10% 63 90 202 360 1,440 5,760 Must Operate VDC 4.0 4.8 7.2 9.6 19.2 38.4 MECHANICAL DATA ORDER NUMBER* AZ991–1C–5D AZ991–1C–6D AZ991–1C–9D AZ991–1C–12D AZ991–1C–24D AZ991–1C–48D 0.87 (22) 0.55 (14) STANDARD RELAYS: Medium Duty (5 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Max. Continuous VDC 8.4 10.0 15.1 20.2 40.3 80.7 Coil Resistance ± 10% 63 90 202 360 1,440 5,760 Must Operate VDC 4.0 4.8 7.2 9.6 19.2 38.4 0.72 (18.2) .019 (0.5) 0.15 (3.9) .040 (1.1) .012 (0.3) .040 (1.1) ORDER NUMBER* AZ991–1CH–5D AZ991–1CH–6D AZ991–1CH–9D AZ991–1CH–12D AZ991–1CH–24D AZ991–1CH–48D 0.15 0.30 0.30 (3.9) (7.62) (7.62) 0.18 (4.45) 0.18 (4.45) 0.02 .035 (0.51) (0.89) STANDARD RELAYS: Heavy Duty (10 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.4 Coil Resistance ± 10% 63 90 202 360 1,440 5,760 Must Operate VDC 4.0 4.8 7.2 9.6 19.2 38.4 0.40 (10.16) ORDER NUMBER* AZ991–1CT–5D AZ991–1CT–6D AZ991–1CT–9D AZ991–1CT–12D AZ991–1CT–24D AZ991–1CT–48D 6 10.0 9 15.1 12 20.2 24 40.3 48 80.7 * Add suffix “L” for flux-tight version PC BOARD LAYOUT 0.3 (7.62) 0.3 (7.62) Maximum Switching Capacity 5 Coil Temperature Rise vs. Coil Power 5A 3A 80 Coil Temperature Rise ˚C 0.4 (10.16) 0.18 (4.45) 0.18 (4.45) 3 AC RESISTIVE LOAD 1.5A 0A Current 50 5 — 0.05 dia. holes (5 — 1.3 dia. holes) 1 DC RESISTIVE LOAD Viewed toward terminals 40 0.5 WIRING DIAGRAM 30 1 N.O. 4 20 30 50 100 Voltage 200 250 100 11 0 130 150 % of Nominal Coil Voltage (at 20˚C) 2 5 N.C. Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/15/03W