AP1509-SL-13

AP1509 150kHz, 2A PWM BUCK DC-DC CONVERTER Description Pin Assignments The AP1509 series are monolithic ICs designed for a step-down DC-DC converter and have the ability of driving a 2A load without an additional transistor, which saves board space. (Top View) The external shutdown function can be controlled by logic level and VIN 1 Output 2 8 GND 7 GND then go into standby mode. The internal compensation makes feedback control have good line and load regulation without external AP1509 design. Regarding protected function, thermal shutdown prevents FB 3 6 GND SD 4 5 GND overtemperature operating from damage, and current limit works against overcurrent operating of the output switch. If current limit function occurs, and VFB is below 0.5V, the switching frequency is SOP-8L reduced. The AP1509 series operates at a switching frequency of 150kHz thus allowing smaller-sized filter components than what is required with lower frequency switching regulators. Other features include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The output version included fixed 3.3V, 5V, 12V, and an adjustable type. The chips are available in a standard 8-lead SO-8 package. Features Applications • • • • • • • • • • • • • • • • Output Voltage: 3.3V, 5V, 12V, and Adjustable Output Version Adjustable Version Output Voltage Range of 1.23V to 18V+4% 150kHz +15% Fixed Switching Frequency Voltage Mode Non-Synchronous PWM Control Thermal-Shutdown and Current-Limit Protection ON/OFF Shutdown Control Input Operating Voltage up to 22V Output Load Current: 2A Low Power Standby Mode Built-in Switching Transistor On Chip Totally Lead-Free & Fully RoHS Compliant (Note 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Notes: Simple High-Efficiency Step-Down Regulator On-Card Switching Regulators Positive to Negative Converter 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain