DDC122TU-7-F

DDC (LO-R1) U PART OBSOLETE - CONTACT US NPN PRE-BIASED DUAL TRANSISTOR Features OBSOLETE – PART DISCONTINUED Epitaxial Planar Die Construction Complementary PNP Types Available (DDA) Built-In Biasing Resistors Lead Free/RoHS Compliant (Note 3) "Green" Device (Note 4 and 5) A SOT-363 NXX YM • • • • • B C NXX YM Mechanical Data • • • • • • • • • Case: SOT-363 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin Solderable per MIL-STD202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe) Terminal Connections: See Diagram Marking Information: See Diagrams & Page 3 Ordering Information: See Page 3 Weight: 0.006 grams (approximate) P/N DDC122LU DDC142JU DDC122TU DDC142TU R1 (NOM) 0.22K 0.47K 0.22K 0.47K R2 (NOM) 10K 10K OPEN OPEN H K M J D 6 F L 5 4 6 2 Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal F 0.30 0.40 H 1.80 2.20 J  0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.25 5 4 R1 R2 R 1 1 Min 8° α 0° All Dimensions in mm R1 R2 MARKING N81 N82 N83 N84 Dim R1 3 1 R1, R2 2 3 R1 Only SCHEMATIC DIAGRAM Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Supply Voltage (6) to (1) and (3) to (4) Input Voltage (2) to (1) and (5) to (4) Input Voltage (1) to (2) and (4) to (5) Output Current DDC122LU DDC142JU DDC122TU DDC142TU All Symbol Value Unit VCC V VIN 50 -5 to +6 -5 to +6 VEBO (MAX) 5 V IC 100 mA V Power Dissipation (Note 1) Pd 200 mW Thermal Resistance, Junction to Ambient Air (Note 2) RθJA 625 °C/W Notes: 1. 2. 3. 4. 5. 150mW per element must not be exceeded. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DDC (LO-R1) U Document number: DS30424 Rev. 7 - 4 1 of 4 www.diodes.com June 2021 © Diodes Incorporated DDC (LO-R1) U Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic DDC122LU DDC142JU DDC122LU DDC142JU Input Voltage DDC122LU DDC142JU Input Current Output Current DDC122LU DDC142JU DC Current Gain Gain-Bandwidth Product* Symbol Min Typ Max Unit Vl(off) 0.3 0.3 Test Condition   V VCC = 5V, IO = 100µA Vl(on)   2.0 2.0 V VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA VO(on)   V IO/Il = 5mA/0.25mA Il   IO(off) Gl  56 56 fT  mA VI = 5V  0.3V 28 13 0.5 µA VCC = 50V, VI = 0V    VO = 5V, IO = 10mA 200  MHz VCE = 10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic R1- Only Symbol Min Typ Max Unit Collector-Base Breakdown Voltage BVCBO 50   V IC = 50µA Collector-Emitter Breakdown Voltage BVCEO 40   V IC = 1mA BVEBO 5   V IE = 50µA IE = 50µA ICBO   0.5 µA VCB = 50V IEBO    0.5 0.5 µA VEB = 4V VCE(sat)   0.3 V IC = 5mA, IB = 0.25mA hFE 100 100 250 250 600 600  IC = 1mA, VCE = 5V fT  200  Emitter-Base Breakdown Voltage DDC122TU DDC142TU Collector Cutoff Current DDC122TU DDC142TU Emitter Cutoff Current Collector-Emitter Saturation Voltage DDC122TU DDC142TU DC Current Transfer Ratio Gain-Bandwidth Product* Test Condition MHz VCE = 10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only 250 Pd, POWER DISSIPATION (mW) OBSOLETE – PART DISCONTINUED Output Voltage R1, R2 Types 200 150 100 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve (150mW per element must not be exceeded). DDC (LO-R1) U Document number: DS30424 Rev. 7 - 4 2 of 4 www.diodes.com June 2021 © Diodes Incorporated DDC (LO-R1) U OBSOLETE – PART DISCONTINUED Ordering Information (Note 6) Note: Device Packaging Shipping DDC122LU-7-F SOT-363 3000/Tape & Reel DDC142JU-7-F SOT-363 3000/Tape & Reel DDC122TU-7-F SOT-363 3000/Tape & Reel DDC142TU-7-F SOT-363 3000/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information NXX = Product Type Marking Code See Page 1 Diagrams YM = Date Code Marking Y = Year ex: I = 2021 M = Month ex: 9 = September NXXYM Date Code Key Year Code Month Code DDC (LO-R1) U 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 I J K L M N O P R S T Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 2 3 4 5 6 7 8 9 O N D Document number: DS30424 Rev. 7 - 4 3 of 4 www.diodes.com June 2021 © Diodes Incorporated DDC (LO-R1) U IMPORTANT NOTICE OBSOLETE – PART DISCONTINUED 1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended applications, (c) ensuring their applications, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. Copyright © 2021 Diodes Incorporated www.diodes.com DDC (LO-R1) U Document number: DS30424 Rev. 7 - 4 4 of 4 www.diodes.com June 2021 © Diodes Incorporated