DDTA122TU-7

DDTA (LO-R1) UDDTA U PART OBSOLETE - CONTACT US PNP PRE-BIASED TRANSISTOR NEW PRODUCT OBSOLETE – PART DISCONTINUED Features • • • • • Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistors Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 & 4) • • • • • • • Dim Min Max A 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal G E 0.30 0.40 H G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.18 α 0° 8° 3 OUT B C Mechanical Data • • • SOT-323 A 2 Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe) Marking Information: See Table Below and Page 3 Ordering Information: See Page 3 Weight: 0.006 grams (approximate) IN 1 GND K M J D L E All Dimensions in mm OUT 3 P/N DDTA122LU DDTA142JU DDTA122TU DDTA142TU R1 (NOM) 0.22KΩ 0.47KΩ 0.22KΩ 0.47KΩ R2 (NOM) 10KΩ 10KΩ OPEN OPEN C Type Code P81 P82 P83 P84 B R1 IN B 1 C OUT 3 R2 2 E 1 E 2 GND (+) GND(+) IN Equivalent Inverter Circuit Schematic and Pin Configuration Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Supply Voltage, (3) to (2) Input Voltage, (1) to (2) Input Voltage, (2) to (1) Output Current DDTA122LU DDTA142JU DDTA122TU DDTA142TU Value Unit VCC V VIN -50 +5 to -6 +5 to -6 VEBO (MAX) -5 V V IC -100 mA Power Dissipation (Note 1) Pd 200 mW Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W Tj, TSTG -55 to +150 °C Operating and Storage Temperature Range Notes: 1. 2. 3. 4. All Symbol Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DDTA (LO-R1) UDDTA U Document number: DS30402 Rev. 7 - 4 1 of 4 www.diodes.com June 2021 © Diodes Incorporated DDTA (LO-R1) UDDTA U Electrical Characteristics Characteristic DDTA122LU DDTA142JU DDTA122LU DDTA142JU Output Voltage DDTA122LU DDTA142JU Input Current Output Current DDTA122LU DDTA142JU DC Current Gain Gain-Bandwidth Product* Symbol Min Typ Vl(off) -0.3 -0.3 Max Unit   V VCC = -5V, IO = -100µA -2.0 -2.0 V VO = -0.3V, IO = -20mA VO = -0.3V, IO = -20mA V IO/Il = -5mA/-0.25mA Vl(on)   VO(on)   Il   IO(off)  56 56  Gl fT Test Condition mA VI = -5V  -0.3V -28 -13 -0.5 µA VCC = -50V, VI = 0V    VO = -5V, IO = -10mA 200  MHz VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics Characteristic Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage DDTA122TU DDTA142TU Collector Cutoff Current DDTA122TU DDTA142TU Emitter Cutoff Current Collector-Emitter Saturation Voltage DDTA122TU DDTA142TU DC Current Transfer Ratio R1- Only Types @TA = 25°C unless otherwise specified Collector-Base Breakdown Voltage Gain-Bandwidth Product* Symbol Min Typ Max Unit BVCBO -50   V IC = -50µA Test Condition BVCEO -40   V IC = -1mA BVEBO -5   V IE = -50µA IE = -50µA ICBO   -0.5 µA VCB = -50V IEBO    -0.5 -0.5 µA VEB = -4V VCE(sat)   -0.3 V IC = -5mA, IB = -0.25mA hFE 100 100 250 250 600 600  IC = -1mA, VCE = -5V fT  200  MHz VCE = -10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only 250 Pd, POWER DISSIPATION (mW) NEW PRODUCT OBSOLETE – PART DISCONTINUED Input Voltage R1, R2 Types @TA = 25°C unless otherwise specified 200 150 100 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve DDTA (LO-R1) UDDTA U Document number: DS30402 Rev. 7 - 4 2 of 4 www.diodes.com June 2021 © Diodes Incorporated DDTA (LO-R1) UDDTA U Notes: 5. Device Packaging Shipping DDTA122LU-7-F SOT-323 3000/Tape & Reel DDTA142JU-7-F SOT-323 3000/Tape & Reel DDTA122TU-7-F SOT-323 3000/Tape & Reel DDTA142TU-7-F SOT-323 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXX Date Code Key Year Code Month Code 2021 I XXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: I = 2021 M = Month ex: 9 = September YM NEW PRODUCT OBSOLETE – PART DISCONTINUED Ordering Information (Note 4 & 5) 2022 J 2023 K 2024 2025 2026 2027 L M N O Jan Feb Mar Apr May Jun Jul 1 2 3 4 5 6 7 DDTA (LO-R1) UDDTA U Document number: DS30402 Rev. 7 - 4 3 of 4 www.diodes.com Aug Sep Oct Nov Dec 8 9 O N D June 2021 © Diodes Incorporated DDTA (LO-R1) UDDTA U IMPORTANT NOTICE NEW PRODUCT OBSOLETE – PART DISCONTINUED 1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended applications, (c) ensuring their applications, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. Copyright © 2021 Diodes Incorporated www.diodes.com DDTA (LO-R1) UDDTA U Document number: DS30402 Rev. 7 - 4 4 of 4 www.diodes.com June 2021 © Diodes Incorporated