DSR6U600D1

DSR6U600D1 6A DIODESTAR RECTIFIER Features NEW PRODUCT • • • Mechanical Data TM DIODESTAR is a Proprietary Process for High Voltage Rectifiers which Delivers: • Ultra-Fast Reverse Recovery (trr < 30ns) Giving a Rapid Switching Response • Soft Recovery for Low EMI Noise • Excellent High Temperature Stability • High Forward Surge Capability Enables High Efficiency as the Boost Diode in PFC Circuits Lead Free Finish, RoHS Compliant (Note 1) • • Case: DPAK (TO252-3L) Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.4 grams (approximate) • • • 3 Top View Package Pin Out Configuration Ordering Information (Note 2) Part Number DSR6U600D1-13 Notes: Case DPAK (TO252-3L) Packaging 2500 pieces/reel 1. No purposefully added lead. 2. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information DSR 6U600 YYWW AB DSR6U600D1 Document number: DS33405 Rev. 3 - 2 DSR6U600 = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 08 = 2008) WW = Week (01 - 53) 1 of 4 www.diodes.com October 2010 © Diodes Incorporated DSR6U600D1 Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO Value Unit 600 V 6 A IFSM 60 A Symbol Value Unit RθJS RθJA TJ, TSTG 10 47 ºC/W -65 to +175 ºC Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 3) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Electrical Characteristics Characteristic Forward Voltage Drop Leakage Current (Note 4) @TA = 25°C unless otherwise specified Symbol VF IR Reverse Recovery Time trr Softness Factor Reverse Recovery Current Reverse Recovery Charges Junction Capacitance S IRM Qrr CJ Notes: Min - Typ 2.1 21 Max 2.6 50 25 - 33 45 - 0.5 4.3 220 30 - Unit V μA ns A nC pF Test Condition IF = 6A, TJ = 25ºC VR = 600V, TJ = 25ºC IF = 0.5A, IR = 1A, IRR = 0.25A IF = 1A, VR = 30V, di/dt = 50A/μs IF = 6A, dl/dt = 200A/μs, VR = 400V, TJ = 125ºC 4.0V, 1MHz 3. Device mounted on Polymide substrate, 1" * 1", 2oz, copper, double-sided, PC boards. 4. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) 12 10 PD, POWER DISSIPATION (W) NEW PRODUCT Maximum Ratings @TA = 25°C unless otherwise specified 8 6 4 2 0 0 10 T A = 150°C 1 0.1 Document number: DS33405 Rev. 3 - 2 TA = 85°C TA = 25°C 0.01 0.001 0.0001 2 4 6 8 10 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation DSR6U600D1 TA = 125°C 2 of 4 www.diodes.com 0 0.4 0.8 1.2 1.6 2.0 2.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.2 Typical Forward Characteristics October 2010 © Diodes Incorporated 100 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (µA) 1,000 1,000 TA = 150°C TA = 125°C 10 T A = 85°C 1 TA = 25°C 0.1 0.01 0 100 10 100 200 300 400 500 600 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 9 0 5 10 15 20 25 30 35 40 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 0 120 240 360 480 600 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 175 TA, DERATED AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) NEW PRODUCT DSR6U600D1 Based on Lead Temp (TL) 8 7 6 5 4 3 2 1 Note 3 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 150 125 100 75 50 25 0 Package Outline Dimensions E A b3 c2 L3 A2 D E1 H L4 A1 L e 2X b2 3X b DSR6U600D1 Document number: DS33405 Rev. 3 - 2 a 3 of 4 www.diodes.com TO252-3L Dim Min Max Typ A 2.19 2.39 2.29 A1 0.00 0.13 0.08 A2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c2 0.45 0.58 0.531 D 6.00 6.20 6.10 D1 5.21 − − e 2.286 − − E 6.45 6.70 6.58 E1 4.32 − − H 9.40 10.41 9.91 L 1.40 1.78 1.59 L3 0.88 1.27 1.08 L4 0.64 1.02 0.83 a 0° 10° − All Dimensions in mm October 2010 © Diodes Incorporated DSR6U600D1 NEW PRODUCT Suggested Pad Layout Dimensions Z X1 X2 Y1 Y2 C E1 X2 Y2 C Z Value (in mm) 11.6 1.5 7.0 2.5 7.0 6.9 2.3 Y1 X1 E1 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDING TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com DSR6U600D1 Document number: DS33405 Rev. 3 - 2 4 of 4 www.diodes.com October 2010 © Diodes Incorporated