MBR1045

PART OBSOLETE MBR1030 – MBR1050 Pb OBSOLETE – PART DISCONTINUED 10A SCHOTTKY BARRIER RECTIFIER Features Mechanical Data         Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Case: TO-220AC Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: Type Number Weight: 2.24 grams (approximate)      Base Cathode 1 1 Cathode 3 Anode Package Pin Out Configuration Ordering Information (Note 3) Part Number MBR10xx* Case TO-220AC Packaging 50/Tube * xx = Device type, e.g. MBR1045 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information MBR10xx MBR10xx = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 13 = 2013) WW = Week (01 - 53) YYWW AB MBR1030 – MBR1050 Document number: DS23009 Rev. 11 - 4 1 of 4 www.diodes.com June 2015 © Diodes Incorporated MBR1030 – MBR1050 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20%. Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 7) RMS Reverse Voltage Average Rectified Output Current (Note 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load @TC = +125°C Symbol MBR 1030 MBR 1035 MBR 1045 MBR 1050 Unit VRRM VRWM VR 30 35 45 50 V VR(RMS) 21 24.5 31.5 35 V IO 10 A IFSM 150 A Thermal Characteristics Characteristic Symbol Typical Thermal Resistance Junction to Case (Note 5) Operating and Storage Temperature Range Electrical Characteristics Forward Voltage Drop MBR 1035 MBR 1045 MBR 1050 Unit RθJC 2.5 °C/W TJ, TSTG -65 to +150 °C Symbol MBR 1030 MBR 1035 MBR 1045 MBR 1050 Unit @ IF = 10A, TC = +25°C @ IF = 10A, TC = +125°C VFM 0.84 0.57 0.95 0.70 V @TC = +25°C @TC = +125°C IRM 0.1 15 0.1 25 mA Peak Reverse Current at Rated DC Blocking Voltage (Note 7) Typical Total Capacitance (Note 5) Notes: MBR 1030 (@TA = +25°C, unless otherwise specified.) Characteristic 400 CT pF 4. Thermal resistance junction to case mounted on heatsink. 5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 6. RoHS revision 13.2.2003. High temperature solder exemptions applied, see EU Directive Annex Note 7. 7. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) 10 I(AV), AVERAGE FORWARD CURRENT (A) OBSOLETE – PART DISCONTINUED Characteristic 8 6 4 2 0 0 50 100 150 TC, CASE TEMPERATURE ( °C) Figure 1 Forward Current Derating Curve MBR1030 – MBR1050 Document number: DS23009 Rev. 11 - 4 2 of 4 www.diodes.com 50 MBR1030 - MBR1045 10 MBR1050 / MBR1060 1.0 0.1 0.2 0.4 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics June 2015 © Diodes Incorporated 1,000 250 TJ = 25°C f = 1.0MHz CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 300 200 150 100 50 0 1 IR, INSTANTANEOUS REVERSE CURRENT (mA) 10 100 NUMBER OF CYCLES AT 60Hz Figure 3 Max Non-Repetitive Surge Current 100 0.1 1.0 10 VR, DC REVERSE VOLTAGE (V) Figure 4 Typical Total Capacitance 100 10 TJ = 125°C 1.0 T J = 75°C 0.1 TJ = 25°C 0.01 0.001 0 40 60 80 100 120 140 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Figure 5 Typical Reverse Characteristics Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A E Q TO220AC Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 0.61 D 14.22 - 16.51 D1 8.39 9.01 e1 5.08 E 9.66 - 10.66 H1 5.85 6.85 L 12.70 - 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm A1 SEATING PLANE P H1 D D1 L1 b2 L OBSOLETE – PART DISCONTINUED MBR1030 – MBR1050 b c A2 e1 MBR1030 – MBR1050 Document number: DS23009 Rev. 11 - 4 3 of 4 www.diodes.com June 2015 © Diodes Incorporated MBR1030 – MBR1050 IMPORTANT NOTICE OBSOLETE – PART DISCONTINUED DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com MBR1030 – MBR1050 Document number: DS23009 Rev. 11 - 4 4 of 4 www.diodes.com June 2015 © Diodes Incorporated