PT7M6130CLC4EX

PT7M6118-6150 CL/CH/NL Low Power Voltage Detector Features Description        The PT7M61xx serials of ultra-low-power voltage detectors monitor battery, power-supply and system voltages. Each circuit includes a precision bandgap reference, a comparator, internally trimmed resistor networks that set specified trip thresholds, and an internal 1% and 5% threshold hysteresis circuit. Output is asserted when VCC falls below the internal VTH- and remains asserted until VCC rises above VTH+ (VTH+ = VTH- × 1.05). These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from +1.8V to +5V in 100mV increments. The series are voltage detectors with a propagation delay of 17µs. The family is available with three output stage options: push-pull with active-low output, push-pull with active- high output, and open drain with active-low output. These devices specified over the -40°C to +85°C temperature range. Highly accurate: 1.5% (25°C) Low power consumption: 1μA @ 3.6V Vcc Detect voltage range: 1.8 to 5V in 100mV increments Operating voltage range: 1.2V ~ 5.5V Operating temperature range: -40°C to + 85°C Detect voltage accuracy over temperature: 2.5%  Typ Output configuration: N-channel open drain or CMOS Pin Configuration All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 1 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL Pin Description Name Type Description RST O 111 Reset Output (PT7M61xxCL/NL): RST is asserted when VCC drops below voltage threshold VTH-. Active low. RST O Reset Output (PT7M61xxCH). RST is asserted when VCC drops below voltage threshold VTH-. Active high. GND P Ground VCC P Supply Voltage. Block Diagram Block Diagram of PT7M61xxCL/CH Vcc - RST / (RST) + (RST is for 61xxCH only) GND Reference Voltage 1.25V Block Diagram of PT7M61xxNL Vcc RST + GND Reference Voltage 1.25V All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 2 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL Maximum Ratings Storage Temperature ............................................................-65oC to +150oC Ambient Temperature with Power Applied.......................... -40oC to +85oC Supply Voltage to Ground Potential (Vcc to GND) ..............-0.3V to +6.0V DC Input Voltage (All inputs except Vcc and GND)......-0.3V to VCC+0.3V DC Output Current (All outputs) ..........................................................20mA Power Dissipation .......................................... 320mW (Depend on package) Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other condi-tions above those indicated in the operational sec-tions of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. DC Electrical Characteristics (VCC = 1.2V to 5.5V, TA= -40~85ºC, unless otherwise noted. Typical values are at T A = +25ºC) Description Supply Voltage Supply Current Output high Sym. Open-Drain Output Leakage Current Min Typ Max TA= 0~70ºC 1.0 - 5.5 TA= -40~85ºC 1.2 - 5.5 VCC = 3.6V. No load. - 1.0 3.0 µA VCC = 5V. No load. - 1.3 3.6 µA VCC ≥ 1.8V, Isource = 1mA 0.8×Vcc - - VCC ≥ 2.5V, Isource = 3mA 0.8×Vcc - - VCC ≥ 4.5V, Isource = 8mA 0.8×Vcc - - VCC ≥ 1.2V, Isink = 1mA - - 0.3 VCC ≥ 2.5V, Isink = 4mA - - 0.3 VCC ≥ 4.5V, Isink = 9mA - - 0.4 - - - 1 A V VTH+ (VTH-) 1.015 (VTH-) 1.025 (VTH+) 1.015 (VTH+) 1.025 3 4.5 6 % - 1 - V ICC VOH VOL ILKG (VTH-) 0.985 (VTH-) 0.975 (VTH+) 0.985 (VTH+) 0.975 +25C VTH-40C~85C Voltage Threshold +25C VTH+ -40C~85C voltage threshold Hysteresis Unit VCC Output Driving Output low Test Conditions VHYST VHYST = [(VTH+)-(VTH-)]/(VTH-) 100% VTHVTHVTH+ V V Note: VTH+ = 1.05  VTH- 。VTH- is voltage threshold when Vcc falls from high to low. V TH＋is voltage threshold when Vcc rises from low to high. All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 3 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL AC Electrical Characteristics Timing diagram VTH+ VTH- VCC tRP tP tRP tP RST RST (PT7M61xxCH) VTH+ = 1.05 x VTH- (VCC = 1.2V to 5.5V, TA= -40~85ºC, unless otherwise noted. Typical values are at TA = +25ºC) Sym. Description Test Conditions Min Typ Max Unit tRP Timeout Period - - - 200 s tP Delay - - 50 - s VCC Maximum Transient Duration Reset threshold overdrive=500mV (VCC-Vth=-500mV) - 20 - s toverdrive Typical Operation Circuit PT7M61xxNL Application Example VIN PT7M61xxNL RL RST Vcc GND Please use N-ch open drains configuration, when a resistor RIN is connected between the VCC pin and power source VIN. In such cases, please ensure that RIN is less than 10k and that C is more than 0.1F. RL could be 1kto 510k. All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 4 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL Mechanical Information TA3 (SOT23-3) All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 5 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL TA5 (SOT23-5) All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 6 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL C3 (SC70-3) All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 7 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL C4 (SC70-4) All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 8 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL XV (UDFN1.6x1.6-4L) All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 9 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL For latest package info. please check: http://www.diodes.com/design/support/packaging/pericom-packaging/packaging-mechanicals-and-thermal-characteristics/ Ordering Information Part Number PT7M61xxCLTA3E PT7M61xxCLTA5E PT7M61xxCLC3E PT7M61xxCLC4E *PT7M61xxCHTA3E *PT7M61xxCHTA5E *PT7M61xxCHC3E *PT7M61xxCHC4E PT7M61xxNLTA3E PT7M61xxNLTA5E PT7M61xxNLC3E PT7M61xxNLC4E PT7M61xxCLETA3E PT7M61xxCLETA5E PT7M61xxCLEC3E PT7M61xxCLEC4E *PT7M61xxCHETA3E *PT7M61xxCHETA5E *PT7M61xxCHEC3E *PT7M61xxCHEC4E PT7M61xxNLETA3E PT7M61xxNLETA5E PT7M61xxNLEC3E PT7M61xxNLEC4E PT7M61xxNLEXVE PT7M61xxNLXVE PT7M61xxCLXVE PT7M61xxCLEXVE *PT7M61xxCHXVE *PT7M61xxCHEXVE Package Code TA3 TA5 C3 C4 TA3 TA5 C3 C4 TA3 TA5 C3 C4 TA3 TA5 C3 C4 TA3 TA5 C3 C4 TA3 TA5 C3 C4 XV XV XV XV XV XV Package 3-Pin, Small Outline Transistor Plastic Package (SOT23) 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) Lead free and Green SOT23-3 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) 3-Pin, Small Outline Transistor Plastic Package (SOT23) 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) 3-Pin, Small Outline Transistor Plastic Package (SOT23) 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) 3-Pin, Small Outline Transistor Plastic Package (SOT23) 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) 3-Pin, Small Outline Transistor Plastic Package (SOT23) 5-Pin, Small Outline Transistor Plastic Package (SOT23) 3-Pin, SOT323 (SC70) 4-Pin, SOT343 (SC70) 4-Pin, 1.6x1.6, MIS (UDFN) 4-Pin, 1.6x1.6, MIS (UDFN) 4-Pin, 1.6x1.6, MIS (UDFN) 4-Pin, 1.6x1.6, MIS (UDFN) 4-Pin, 1.6x1.6, MIS (UDFN) 4-Pin, 1.6x1.6, MIS (UDFN) Notes: 1: “xx” refer to voltage range, see below table 1. 2: Adding E suffix=1% Hysteresis. For example: PT7M61xxCLETA3E. 3: None E suffix=5% Hysteresis. For example: PT7M61xxCLTA3E. 4: E = Pb-free and Green 5: Adding X Suffix= Tape/Reel 6: Contact Pericom for availability 7: “*” for CH part, please check the storage with related sales. All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 10 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL Table 1 Function comparison Item Part No. 1 2 3 PT7M61xxCL PT7M61xxCH PT7M61xxNL Reset Output Open-Drain Push-Pull Active high Active low Active high Active low    Threshold 1.8V to 5.0V in 100mV increments Table 2 Suffix “xx” definition of PT7M61xx Suffix xx 18 19 20 21 22 23 24 VTH- (V) 1.8 1.9 2.0 2.1 2.2 2.3 2.4 Suffix xx 25 26 27 28 29 30 31 VTH- (V) 2.5 2.6 2.7 2.8 2.9 3.0 3.1 All trademarks are property of their respective owners. 2017-04-0007 Suffix xx 32 33 34 35 36 37 38 VTH- (V) 3.2 3.3 3.4 3.5 3.6 3.7 3.8 www.diodes.com 11 Suffix xx 39 40 41 42 43 44 45 VTH- (V) 3.9 4.0 4.1 4.2 4.3 4.4 4.5 Suffix xx 46 47 48 49 50 VTH- (V) 4.6 4.7 4.8 4.9 5.0 5/10/2017 PT0181-16 PT7M6118-6150 CL/CH/NL IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com All trademarks are property of their respective owners. 2017-04-0007 www.diodes.com 12 5/10/2017 PT0181-16