NOT RECOMMENDED
FOR NEW DESIGN
SBG1030CT - SBG1045CT
16A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
•
•
•
•
•
•
•
2
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
High Surge Capability
High Current Capability and Low Forward Voltage Drop
Surge Overload Rating to 125A Peak
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
Lead Free Finish/RoHS Compliant (Note 3)
D PAK
Dim
E
•
•
•
•
•
•
H
4
J
B
Mechanical Data
•
•
G
A
1
2
3
2
Case: D PAK
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish - Tin. Solderable per MIL-STD-202,
Method 208
Ordering Information, Note 5, on Page 2
Polarity: See Diagram
Marking: Type Number
Weight: 1.7 grams (approximate)
M
D
K
C
L
Min
Max
A
9.65
10.69
B
14.60
15.88
C
0.51
1.14
D
2.29
2.79
E
4.37
4.83
G
1.14
1.40
H
1.14
1.40
J
8.25
9.25
K
0.30
0.64
L
2.03
2.92
M
2.29
2.79
All Dimensions in mm
PIN 1
PIN 2 & 4
PIN 3
Maximum Ratings and Electrical Characteristics
@TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 4)
RMS Reverse Voltage
Average Rectified Output Current
@ TC = 95°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
Forward Voltage, per Element
@ IF = 5.0A
Peak Reverse Current
@ Tj = 25°C
at Rated DC Blocking Voltage (Note 4)
@ Tj = 125°C
Typical Total Capacitance (Note 2)
Typical Thermal Resistance Junction to Case (Note 1)
Operating and Storage Temperature Range
Notes:
1.
2.
3.
4.
SBG
1030CT
SBG
1035CT
SBG
1040CT
SBG
1045CT
Unit
30
35
40
45
V
21
25
28
32
10
V
A
IFSM
125
A
VFM
0.55
V
IRM
1.0
50
mA
CT
RθJC
Tj, TSTG
275
3.0
-65 to +125
pF
°C/W
°C
Symbol
VRRM
VRWM
VR
VR(RMS)
IO
Thermal resistance junction to case mounted on heatsink.
Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
Short duration pulse test used to minimize self-heating effect.
DS30092 Rev. 5 - 3
1 of 2
www.diodes.com
SBG1030CT - SBG1045CT
© Diodes Incorporated
NOT RECOMMENDED
FOR NEW DESIGN
I(AV), AVERAGE FWD CURRENT (A)
Total Package
10
8
6
Per Element
4
2
0
0
50
100
IF, INSTANTANEOUS FORWARD CURRENT (A)
12
100
T j = 125 °C
10
Tj = 25° C
1.0
0.1
150
0
1.2
Tj = 25° C
f = 1.0MHz
125
100
75
50
500
200
25
100
0
1
10
0.1
100
Ordering Information
10
100
(Note 5)
Device
SBG1030CT-T-F
SBG1035CT-T-F
SBG1040CT-T-F
SBG1045CT-T-F
5.
1.0
VR, DC REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance, Per Element
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
Notes:
0.8
1000
150
CT, TOTAL CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
0.4
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics, Per Element
Packaging
2
D PAK
2
D PAK
2
D PAK
2
D PAK
Shipping
800/Tape & Reel, 13-inch
800/Tape & Reel, 13-inch
800/Tape & Reel, 13-inch
800/Tape & Reel, 13-inch
For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf.
DS30092 Rev. 5 - 3
2 of 2
www.diodes.com
SBG1030CT - SBG1045CT
© Diodes Incorporated
NOT RECOMMENDED
FOR NEW DESIGN
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
DS30092 Rev. 5 - 3
3 of 2
www.diodes.com
SBG1030CT - SBG1045CT
© Diodes Incorporated