ZM33064GTA

SUPPLY VOLTAGE MONITOR ZM33064 ISSUE 4 - JULY 2006 DEVICE DESCRIPTION FEATURES The ZM33064 is a three terminal under vo l ta ge mo ni t or ci rc ui t f or use i n microprocessor systems. The threshold voltage of the device has been set to 4.6 volts making it ideal for 5 volt circuits. • • • • • • • Included in the device is a precise voltage reference and a comparator with built in hysteresis to prevent erratic operation. The ZM33064 features an open collector output capable of sinking at least l0mA which only requires a single external resistor to interface to following circuits. Operation of the device is guaranteed from one volt upwards, from this level to the device threshold voltage the output is held low providing a power on reset function. Should the supply voltage, once established, at any time drop below the threshold level then the output again will pull low. The device is available in a TO92 package for through hole applications as well as SO8 and SOT223 for surface mount requirements. SCHEMATIC DIAGRAM Issue 4 - July 2006 © Zetex Semiconductors plc 2006 • • SO8, SOT223 and TO92 packages Power on reset generator Automatic reset generation Low standby current Guaranteed operation from 1 volt Wide supply voltage range Internal clamp diode to discharge delay capacitor 4.6 volt threshold for 5 volt logic 20mV hysteresis prevents erratic operation APPLICATIONS • • • • • • Microprocessor systems Computers Computer peripherals Instrumentation Automotive Battery powered equipment ZM33064 ABSOLUTE MAXIMUM RATING Input Supply Voltage Offstate Output Voltage Onstate Output Sink Current(Note 1) Clamp diode Forward Current(Note 1) Operating junction temperature Operating Temperature Storage Temperature -1 to 10V 10V Internally limited Power Dissipation TO92 SOT223 SO8 780mW 2W(Note 2) 780mW(Note 2) 100mA 150°C -40 to 85°C -65 to 150°C TEST CONDITIONS (Tamb=25°C for typical values, Tamb=-40 to 85°C for min/max values (Note3)) COMPARATOR MIN TYP. MAX. PARAMETER SYMBOL UNITS Threshold Voltage High state output (Vcc increasing) Low state output (Vcc decreasing) VIH VIL 4.5 4.5 4.61 4.59 4.7 4.7 V V Hysteresis VH 0.01 0.02 0.05 V OUPUT PARAMETER SYMBOL Output sink saturation: VOL MIN TYP. MAX. UNITS (Vcc=4.0V, Isink=8.0mA) 0.46 1.0 V (Vcc=4.0V, Isink=2.0mA) 0.15 0.4 V 0.25 V 20 60 mA 0.02 0.5 µA 1.2 1.5 V (Vcc=1.0V, Isink=0.1mA) Onstate output sink current (Vcc , Output=4V) Isink Offstate output leakage current (Vcc , Output=5V) Ioh Clamp diode forward voltage (If=10mA) Vf Propagation delay (Vin 5V to 4V, Rl=10k, Tamb=25°C) Td 10 0.6 µs 1.5 TOTAL DEVICE PARAMETER SYMBOL Operating input voltage range Vcc Quiescent input current (Vcc=5V) Iq MIN TYP. MAX. 1.0 to 6.5 UNITS V 135 200 µA Note: 1. Maximum package power dissipation must be observed 2. Maximum power dissipation, for the SOT223 and SO8 packages, is calculated assuming that the device is mounted on a PCB measuring 2 inches square. 3. Low duty cycle pulse techniques are used during test to maintain junction temperatures as Issue 4 - July 2006 © Zetex Semiconductors plc 2006 www.zetex.com ZM33064 500 10 400 8 Output Voltage (V) Input Current (µA) TYPICAL CHARACTERISTICS 300 200 -40 °C 25 °C 85 °C RL=10K TA=25 °C 6 4 2 100 0 0 0 2 4 6 Input Voltage 8 10 0 4 10 (V) Output Voltage vs. Input Voltage 30 RL=10K Vin=4V 5 Vin (V) -40 °C ' ' 4 25 °C 20 85 °C 4 Vout (V) 10 2 0 0 0 0.4 0.8 1.2 1.6 0 2.0 1 Output Saturation Voltage vs. Sink Current 80 3 2 4 Time (µs) Output Saturation Voltage (V) Reset Delay Time 4.70 Vin=0V 60 4.65 Threshold Voltage (V) Forward Current (mA) 8 6 Input Voltage Input Current vs. Input Voltage Sink Current (mA) 2 (V) 85 °C 40 25 °C -40 °C 20 0 Upper Threshold 4.60 Lower Threshold 4.55 4.50 0 0.4 0.8 1.2 1.6 2.0 Forward Voltage (V) Clamp Diode Forward Current vs. Voltage Issue 4 - July 2006 © Zetex Semiconductors plc 2006 -40 -20 0 20 40 60 80 100 Temperature ( °C) Threshold Voltage vs. Temperature www.zetex.com ZM33064 TIMING DIAGRAM Vcc Threshold Voltage 1V Output AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA AAAA AAAA AAAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAA AAAA AAAAAAA Output Undefined Output Undefined APPLICATION CIRCUIT Note 4: A time delayed reset can be accomplished with the additional Cd. 1   T DY = RCd ln   V TH ( mpu )   1 − V in    Issue 4 - July 2006 © Zetex Semiconductors plc 2006 TDY =Time (Seconds) VTH =Microprocessor Reset Threshold Vin =Power Supply Voltage www.zetex.com ZM33064 CONNECTION DIAGRAMS SO8 Package Suffix – N8 SOT223 Package Suffix – G Top View Top View – Pin 4 floating or connected to pin 2 TO92 Package Suffix – C Bottom View – ORDERING INFORMATION Part Number Package Part Mark ZM33064N8 SO8 ZM33064 ZM33064G SOT223 ZM33064 ZM33064C TO92 ZM33064 Europe Americas Asia Pacific Corporate Headquarters Zetex GmbH Streitfeldstraße 19 D-81673 München Germany Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com For international sales offices visit www.zetex.com/offices Zetex products are distributed worldwide. For details, see www.zetex.com/salesnetwork This publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned. The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. Issue 4 - July 2006 © Zetex Semiconductors plc 2006 www.zetex.com