ZR40401N850TA

PRECISION 5.0 VOLT MICROPOWER VOLTAGE REFERENCE ZR4040-5.0 ISSUE 2 - MARCH 1998 DEVICE DESCRIPTION FEATURES • The ZR4040-5.0 uses a bandgap circuit design to achieve a precision micropower voltage reference of 5.0 volts. The device is available in small outline surface mount packages, ideal for applications where space saving is important, as well as packages for through hole requirements. • • • • • • • • The ZR4040-5.0 design provides a stable voltage without an external capacitor and is stable with capacitive loads. The ZR4040-5.0 is recommended for operation between 60µA and 15mA and so is ideally suited to low power and battery powered applications. Small outline SO8 and SOT23 packages TO92 style package No stabilising capacitor required Typical TC 20ppm/°C Typical slope resistance 0.33Ω 2% and 1% tolerance Industrial temperature range Operating current 60µA to 15mA Transient response,stable in less than 10µs APPLICATIONS Excellent performance is maintained to an absolute maximum of 25mA, however the rugged design and 20 volt processing allows the reference to withstand transient effects and currents up to 200mA. Superior switching capability allows the de v i c e t o r e a c h s t a b l e ope ra ti n g conditions in only a few microseconds. • • • • • • SCHEMETIC DIAGRAM V R G nd 4-181 Battery powered and portable equipment. Metering and measurement systems. Instrumentation. Test equipment. Data acquisition systems. Precision power supplies. ZR4040-5.0 ABSOLUTE MAXIMUM RATING Reverse Current Forward Current Operating Temperature Storage Temperature Power Dissipation (Tamb=25°C) SOT23 330mW SO8 625mW E-Line, 3 pin (TO92) 500mW 25mA 25mA -40 to 85°C -55 to 125°C ELECTRICAL CHARACTERISTICS TEST CONDITIONS (Unless otherwise stated) Tamb=25°C CONDITIONS SYMBOL PARAMETER VR Reverse Breakdown Voltage IMIN Minimum Operating Current IR Recommended Operating Current TC † Average Reverse Breakdown Voltage Temp. Co. IR=150µA LIMITS TYP MAX 4.95 4.90 5.0 5.0 5.05 5.10 30 60 µA 15 mA 20 100 ppm/°C 0.33 1.5 Ω 1.0 Ω 0.06 ZR Reverse Dynamic Impedance IR = 1mA f = 100Hz IAC=0.1 IR 0.4 EN Wideband Noise Voltage IR = 1mA f = 10Hz to 10kHz 105 60 VR x (T(max)−T(min)) 50 VR Change(IR (min) to IR (max)) RS = IR (max) − IR (min) Reverse Current (µA) (VR(max)−VR(min)) x 1000000 Note: VR(max) - VR(min) is the maximum deviation in reference voltage measured over the full operating temperature range. § 1 2 V IR(min) to IR(max) Slope Resistance TC = UNITS MIN RS § † TOL. % µV (rms) 40 TA=85°C 30 20 10 TA=-40°C 0 0 2.0 4.0 Reverse Voltage (V) Reverse Characteristics 4-182 6.0 ZR4040-5.0 TYPICAL CHARACTERISTICS 5.02 1.6 IR=150µA to 15mA Reference voltage (V) Forward Voltage (V) 1.4 1.2 1.0 0.8 0.6 5.00 4.98 4.96 0.4 0.1 1 10 100 -40 1000 -20 Forward Current (mA) 0 20 40 60 80 Temperature (°C) Forward Characteristics Temperature Drift 3.0 1000 Slope resistance (Ω) Slope resistance (Ω) IR=150µA 2.0 TA=-40°C 1.0 TA=25°C TA=85°C 0 100 IR=5mA 10 1 0.1 0.1 1 100 10 0.01 0.1 1 10 100 Frequency (kHz) Reference Current (mA) Slope Resistance v Current Slope Resistance v Frequency 6.0 6.0 5 mA 4.0 4.0 150 µA VR - (V) 2.0 1K 5mA 33K 150µA VR 0 10 10 0 0 500 1000 VIN 1K 5mA 2.0 0 VIN - (V) VIN - (V) VR - (V) VIN VR 0 0 Time (µs) 33K 150µA 1 2 3 Time (µs) Transient Response (Single Pulse) Transient Response (Repetitive Pulse) 4-183 4 ZR4040-5.0 CONNECTION DIAGRAMS SO8 Package Suffix – N8 SOT23 Package Suffix – F Top View Top View – Pin 1 floating or connected to pin 2 E-Line, 3 pin, Rev Package Suffix – R Bottom View – Pin 3 floating or connected to pin 1 ORDERING INFORMATION Part Number Tol% Package Partmark ZR40402F50 2 SOT23 50L ZR40401F50 1 SOT23 50M ZR40402N850 2 SO8 ZR4040250 ZR4040150 ZR40401N850 1 SO8 ZR40402R50 2 E-Line * ZR4040250 ZR40401R50 1 E-Line * ZR4040150 * E-Line, 3 pin Reversed 4-184