ZR40401R50STZ

PRECISION 5.0 VOLT MICROPOWER VOLTAGE REFERENCE ZR4040-5.0 ISSUE 3 - NOVEMBER 2002 DEVICE DESCRIPTION FEATURES • • • • • • • • • The ZR4040-5.0 uses a bandgap circuit design to achieve a precision micropower voltage reference of 5.0 volts. The device is available in a small outline surface mount package, ideal for applications where space saving is important, as well as packages for through hole requirements. The ZR4040-5.0 design provides a stable voltage without an external capacitor and is stable with capacitive loads. The ZR4040-5.0 is recommended for operation between 60µA and 15mA and so is ideally suited to low power and battery powered applications. Small outline SOT23 package TO92 style package No stabilising capacitor required Typical TC 20ppm/°C Typical slope resistance 0.33Ω 2% and 1% tolerance Automotive temperature range Operating current 60µA to 15mA Transient response,stable in less than 10µs APPLICATIONS • Excellent performance is maintained to an absolute maximum of 25mA, however the rugged design and 20 volt processing allows the reference to withstand transient e ffe cts a nd currents up to 200mA. Superior switching capability allows the device to reach stable operating conditions in only a few microseconds. • • • • • SCHEMETIC DIAGRAM 9 5 *QG 4-181 Battery powered and portable equipment. Metering and measurement systems. Instrumentation. Test equipment. Data acquisition systems. Precision power supplies. ZR4040-5.0 ABSOLUTE MAXIMUM RATING Reverse Current Forward Current Operating Temperature Storage Temperature Power Dissipation (Tamb=25°C) SOT23 330mW E-Line, 3 pin (TO92) 500mW 25mA 25mA -55 to 125°C -55 to 125°C ELECTRICAL CHARACTERISTICS TEST CONDITIONS (Unless otherwise stated) Tamb=25°C SYMBOL PARAMETER CONDITIONS TYP MAX 4.95 4.90 5.0 5.0 5.05 5.10 30 60 µA 15 mA 20 100 ppm/°C 40 125 ppm/°C 0.33 1.5 Ω IR = 1mA f = 100Hz IAC= 0.1 IR 0.4 1.0 Ω IR = 1mA f = 10Hz to 10kHz 105 Reverse Breakdown Voltage IMIN Minimum Operating Current -55 to 125°C IR Recommended Operating Current TC † Average Reverse Breakdown Voltage Temp. Co. -40 to 85°C IR(min) to IR(max) TC † Average Reverse Breakdown Voltage Temp. Co. -55 to 125°C IR(min) to IR(max) RS § Slope Resistance ZR Reverse Dynamic Impedance EN Wideband Noise Voltage TC = VR x (T(max)−T(min)) Note: VR(max) - VR(min) is the maximum deviation in reference voltage measured over the stated operating temperature range. § RS = VR Change (IR (min) to IR (max)) IR (max) − IR (min) IR=150µA 0.06 1 2 V µV (rms)  5HYHUVH&XUUHQW $ † TOL. % UNITS MIN VR (VR(max)−VR(min)) x 1000000 LIMITS m   7$ ƒ&    7$ ƒ&     Reverse Voltage (V) 5HYHUVH&KDUDFWHULVWLFV 4-182  ZR4040-5.0 5.04 5.02 5.00 4.98 4.96 -60 -40 -20 0 4-183 20 40 60 80 100 120 ZR4040-5.0 CONNECTION DIAGRAMS E-Line, 3 pin, Rev Package Suffix – R SOT23 Package Suffix – F Bottom View – Pin 3 floating or connected to pin 1 Top View – Pin 1 floating or connected to pin 2 ORDERING INFORMATION Part Number Tol% Package Partmark ZR40402F50 2 SOT23 50L ZR40401F50 1 SOT23 50M ZR40402R50 2 E-Line * ZR4040250 ZR40401R50 1 E-Line * ZR4040150 * E-Line, 3 pin Reversed 4-184