5HT2

Type 5HT / 5HTP 5HTD1105 W5HTD0405-A21 5 x 20mm Ceramic Tube RoHS Compliant Time-lag Fuse Series (High - Breaking Capacity) Catalog Number RoHS Suffix Ampere Rating Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation 2 Sec) 2 Sec) (ohm) (Volt) max. (A (A (W) 5HT (P) 100 5HT (P) 160 5HT (P) 200 5HT (P) 250 5HT (P) 315 5HT (P) 400 5HT (P) 500 5HT (P) 630 5HT (P) 800 5HT (P) 1 5HT (P) 1.25 5HT (P) 1.6 5HT (P) 2 5HT (P) 2.5 1A - 6.3A / 250V AC @ 1,500A -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R -R 100mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 18.00 12.10 8.00 3.40 2.20 1.40 1.00 0.60 0.40 0.20 0.14 0.10 0.07 0.05 0.04 0.03 0.02 0.01 0.009 0.007 2.05 1.80 1.50 1.20 1.00 0.75 0.70 0.52 0.45 0.25 0.22 0.20 0.19 0.17 0.14 0.10 0.11 0.074 0.092 0.078 0.059 0.035 0.062 0.098 0.18 0.28 0.46 0.70 1.08 1.70 3.00 5.40 9.70 17 31 56 101 181 330 601 0.06 0.04 0.08 0.12 0.22 0.34 0.58 0.90 1.50 1.70 3.20 5.90 11 20 38 69 128 237 439 812 0.27 0.28 0.30 0.34 0.38 0.41 0.48 0.55 0.64 0.73 0.81 0.91 1.00 1.10 1.20 1.40 1.50 1.70 2.70 2.90 Electrical Characteristics (IEC-127-2 STANDARD SHEET 5) Rated Current 100mA to 3.15A 4A and above 1.5 In 2.1 In MIN MAX 2.75 In MIN MAX 4 In MIN MAX 10 In MIN MAX 1 1 hr. 30 30 min. 1 1 sec 80 80 sec 95 150 ms 5 5 sec 10 20 ms 100 100 ms Approvals sdm rSpcc Amp range / Volt @ I.R. ability Safety Agency Approvals s d m r Certificate No. 408893 Licence No. 40000505 Certificate No. EM232 Recognized File No. E20624 250mA - 10A / 250V AC @ 1,500A Acceptance File No. LR39772 File No. JET1037-31003-1004, JET1037-31003-1005 Licence No. 2002010207021531 1A - 5A / 250V AC @ 1,500A 250mA - 10A / 250V AC @ 1,500A 5HT (P) 3.15 5HT (P) 4 5HT (P) 5 5HT (P) 6.3 5HT (P) 8 5HT (P) 10 S p c Consult manufacturer for other ratings RoHS Compliant Product For RoHS Compliant Version, add suffix “R” after catalog number Operating Temperature -55ºC to +125ºC Physical Specification Materials Ceramic body / Nickel Plated Brass Caps Lead wire: Tin plated copper alloy, Diameter 0.032", 6.3A and less Diameter 0.040", 8A and above Marking On fuse: “bel”, “T”, “Current Rating”, “H”, “250V”, “Appropriate Safety Logos”, “✔” (RoHS Version) On label: “bel”, “5HT”, or “5HTP”,“Current Rating”, “Voltage Rating”, “Interrupting Rating”, “Approporiate Safety Logos” and + suffix “R” for RoHS Version Packaging 1. In bulk: 5HT - 1,000 pcs per box; 5HTP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1@ 10mm Pitch and 63.5mm inside Tape Spacing Mechanical Dimensions 1.5" ± 0.08" (38.1 ± 2mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5HTP SEE LEAD SIZE LISTED IN “ MATERIAL” ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 2 06 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 47 Specifications subject to change without notice 5HT 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) Type 5HT / 5HTP 5 x 20mm Ceramic Tube RoHS Compliant W5HTC0305-A1 Time-lag Fuse Series (High - Breaking Capacity) 5HTC0405 E5HTC0405A1 5HT / 5HTP - TIME CURRENT CHARACTERISTIC CURVE - 100mA - 160mA - 200mA - 250mA - 315mA - 400mA - 500mA - 630mA - 800mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3.15A - 4A - 5A - 6.3 A - 8A - 10A 10000 1000 100 TIME IN SECONDS 10 1 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 Specifications subject to change without notice 48