RST

Type RST RSTD1005 RoHS Compliant Time Lag Radial Lead Micro Fuse Series ERSTD1005A1 Catalog Number Ampere Rating Typical Cold Resistance (ohm) Volt-drop @100% In (Vol) max. Melting I2T < 10 mSec (A2 Sec) Melting I2T @10 In (A2 Sec) Maximum Power Dissipation (W) RST 80 RST 100 RST 125 RST 160 RST 200 RST 250 RST 315 RST 400 RST 500 RST 630 RST 800 RST 1 RST 1.25 RST 1.6 RST 2 RST 2.5 RST 3.15 RST 4 RST 5 RST 6.3 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 3.30 2.20 1.50 1.00 0.70 0.50 0.38 0.28 0.211 0.156 0.115 0.085 0.063 0.047 0.035 0.026 0.019 0.014 0.010 0.008 0.40 0.35 0.30 0.26 0.23 0.22 0.19 0.16 0.15 0.13 0.12 0.11 0.10 0.10 0.090 0.087 0.083 0.080 0.077 0.073 0.01 0.02 0.04 0.07 0.12 0.38 0.60 0.90 1.50 2.40 3.70 5.90 9.30 15 23 37 58 92 145 230 0.01 0.02 0.04 0.06 0.11 0.41 0.66 1.00 1.70 2.60 4.20 6.70 10.70 17 27 43 69 110 175 281 0.10 0.11 0.13 0.15 0.17 0.19 0.22 0.25 0.29 0.33 0.38 0.44 0.51 0.58 0.67 0.77 0.88 1.02 1.17 1.34 Electrical Characteristics (IEC 127-3 STANDARD SHEET 4) 1.5 In 2.1 In 2.75 In MIN 4 In 10 In Rated Current 80mA to 6.3A inclusive MIN MAX MAX MIN MAX MIN MAX 1 hr. 2 400 min. ms 10 150 3 sec ms sec 20 150 ms ms Approvals sd r p c c Amp range / Volt @ I.R.ability 80mA to 5A / 250V AC @ 35A or 10 In whichever is greater 80mA to 1.25A / 250V AC @ 35A 800mA / 250V AC @ 35A 1.6A to 4A /250V AC @ 100A 80mA to 6.3A / 277V AC @ 100A 1A to 5A / 250V AC @ 100A 80mA to 5A / 250V AC @ 35A or 10 In whichever is greater Safety Agency Approvals s d Certificate No. 312375 License No. 40006162 License No. 40011144 r c Recognized File No. E20624 p Approved File No. JET1037-31007-1001 License No. 2004010207111444 RoHS Compliant Product Environmental Specification Consult manufacturer for other ratings RoHS Wave Soldering Compatible : (260°C, 10 sec max) Shock Resistance MIL-STD-202G, Method 213B, Condition I (100 G’s peak for 6 milliseconds; Sawtooth Waveform) Vibration Resistance 10-55 Hz x 3 axis/ no load (MIL-STD-202G, Method 201A) Salt Spray Resistance MIL-STD-202G, Method 101E, Condition B (48Hrs) Solderability MIL-STD-202G, Method 208H Soldering Heat Resistance MIL-STD-202G Method 210F, Test Condition C. Top Side (260°C, 20 sec) Moisture Resistance MIL-STD-202G, Method 106G Operating Temperature -55°C to +125°C Marking On fuse: “bel”, “T”, “Current Rating”, “250V” and “Appropriate Safety Logos” On label: “bel”, “RST”, “Current Rating”, “Voltage Rating”, “ Interrupting Rating”, ” for RoHS Version “Appropriate Safety Logos” and “ Packaging 1. In bulk: 1,000 pcs per box. 2. On Tape: Ammo pack, 1,000 pcs per box per EIA-468-A and IEC-286-2 Mechanical Dimensions SHORT L EADS Specifications subject to change without notice ø8.35±0.10 7.7±0.2 4.3 ± 0.3 0.5 min 4.00±0.10 RST 5.08±0.1 (0.200"±0.004") ø0.6±0.1 (0.024"±0.004") Dimension in mm 12.7±0.3 Physical Specification Materials Base and Cover: Black thermoplastic, UL 94-V0 Pins: Tin plated copper alloy ø0.6±0.1 9.0 +2 -0 6.35±1.3 ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 2 06 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 27 Type RST Time Lag Radial Lead Micro Fuse Series RoHS Compliant RSTC1004O02) RST - TIME CURRENT CHARACTERISTIC CURVE - 80mA - 100mA - 125mA - 160mA - 200mA - 250mA - 315mA - 400mA - 500mA - 630mA - 800mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3.15A - 4A - 5A - 6.3A 10000 1000 100 TIME IN SECONDS 10 1 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 Specifications subject to change without notice 28