S553-5841-25

defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960075A • Designed for use with Seeq 84C24 and 8425 10Base-T PHY transceivers • Quad, 4-port designs for maximum space, performance and cost efficiency • Family of part types with same footprint and pinout to customize EMI suppression requirements • Low profile, surface mount packaging, IR reflow rating of 225ºC peak temperature • 2000 Vrms isolation ELECTRICALS AT 25ºC Part No. Insertion Loss (dB) Max 1-10MHz OCL Inductance (µH) Min Return Loss (dB) Min 1MHz-10MHz Crosstalk (dB) Min 1MHz-10MHz CM-CM Rej (dB) Min 10-30MHz 100MHz Schematic S553-5841-25 S553-5841-26 S553-5841-27 -1.0 -1.0 -1.0 100 100 100 -18 -18 -18 -40 -40 -40 N/A -40 -40 N/A -30 -30 A B C SCHEMATICS A B C MECHANICAL Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence 10BASE-T NETWORK COMPONENTS 960075A APPLICATION CIRCUIT APPLICATION NOTES • Bel has developed a variety of quad, 4-port part types for use with Seeq quad, 4-port PHY devices that incorporate digital filtering techniques within the silicon itself. Bel's "filterless magnetics" are optimized for this specific application and create a very cost efficient design solution. Each Bel part type contains 4 channels of transmit and receive transformers to provide for wave shaping, high voltage isolation and EMI noise suppression. • Bel has designed these parts as a family of parts with common footprint and pinouts to enable the designer to customize the use of common mode choke for optimum system performance. • In multi-port system applications, good PCB layout and proper grounding techniques are very critical to achieve FCC class A and B equipment approvals. Bel recommendations are available and can be provided by contacting our engineering department or your local sales representative. • Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366