V7PD-15B120

NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A V7PD-15B Series • • • • • • • • • • Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation Optimized for cost Remote on/off Undervoltage lockout (UVLO) Over current and short circuit protection Remote sense Over temperature shutdown protection POWER PRODUCTS BP02V7PD-15B Description The Bel V7PD-15B modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 5V source. These converters are available in a range of output voltages from 1.2V to 3.3V. They are packaged in an industry standard, single-in-line footprint and provide a maximum 15A output. Standard features include remote on/off, over current and short circuit protection, output voltage adjust and remote sense. These products may be used almost anywhere low voltage silicon is employed and a 5V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications • • • • Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Options • Reverse remote on/off logic Part Number Selection Output Voltage 3.3V 2.5V 1.8V 1.5V 1.2V Input Voltage 5V 5V 5V 5V 5V Max. Output Current 15A 15A 15A 15A 15A Max. Output Power 49.5W 37.5W 27.0W 22.5W 18.0W Typical Efficiency 93% 91% 89% 86% 83% Part Number Active High V7PD-15B330 V7PD-15B250 V7PD-15B180 V7PD-15B150 V7PD-15B120 Part Number Active Low V7PD-15B33L V7PD-15B25L V7PD-15B18L V7PD-15B15L V7PD-15B12L ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 0 -55 Typical Max 6 6 70 105 Unit V V °C °C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current 3.3V 2.5V 1.8V 1.5V 1.2V No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold All Al l All All All All All 70 6 50 135 0.18 4.25 3.85 Module All Symbol Vin Iin 13.5 10.5 7.6 6.5 5.3 100 10 80 160 mA mA mArms mApk A 2s V V Min 4.5 Typical 5 Max 5.5 Units V A Note: Input capacitance a 680µF/6.3V and a 270µF/16V Oscon caps 1. With simulated source impedance of 500nH, 5Hz to 20MHz. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Output Specifications Parameter Output Voltage Set Point 1 POWER PRODUCTS BP02V7PD-15B Units V Module Symbol Vout Min Typical Max 3.3V 2.5V 1.8V 1.5V 1.2V Load Regulation 3.3V 2.5V 1.8V 1.5V 1.2V Line Regulation 3.3V 2.5V 1.8V 1.5V 1.2V Regulation Over Temperature 3.3V 2.5V 1.8V 1.5V 1.2V Total Output Voltage Regulation 3.3V 2.5V 1.8V 1.5V 1.2V Output Ripple and Noise 2 3.3V 2.5V 1.8V 1.5V 1.2V Output Ripple and Noise 2 3.3V 2.5V 1.8V 1.5V 1.2V Output Current Range Output DC Current Limit Shor t Circuit Surge 3.3V 2.5V 1.8V 1.5V 1.2V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout Ton All All Iout Ioutlim Ioutsurge 3.234 2.450 1.764 1.470 1.176 3.3 2.5 1.8 1.5 1.2 3.366 2.550 1.836 1.530 1.224 mV 8 6 6 5 5 16.5 12.5 11.0 10.5 10.5 mV 5 3 3 2 2 10 7.5 6.0 4.5 4.5 mV 15 10 7 5 5 35 25 20 15 15 mV 28 19 16 12 12 50 50 48 45 38 61.5 45 37 30 30 100 100 90 80 70 mVp-p mVrms 25 20 18 15 12 0 19.5 30 25 23 20 17 15 37.5 A A A2s 0.041 0.048 0.070 0.081 0.095 11 0 0 20 3 6800 ms % µF Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 5V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz, 0.1µF ceramic cap on output. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Output Specifications Parameter Transient Response 3 Module Symbol Min Typical Max Units ∆V 50% to 100% of Max Load Settling Time 3.3V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 88 Ts 20 85 Ts 20 150 50 150 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 2.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 95 Ts 20 95 Ts 20 150 50 150 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.8V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 94 Ts 20 92 Ts 20 150 50 150 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 95 Ts 20 95 Ts 20 150 50 150 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.2V ∆V 100% to 50% of Max Load Settling Time Ts Ts 80 20 75 20 150 50 150 50 mV µs mV µs Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/1µS, Ta = 25° C without external load capacitance. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A POWER PRODUCTS BP02V7PD-15B General Specifications Parameter Efficiency1 3.3V 2.5V 1.8V 1.5V 1.2V Switching Frequency Over temperature Shutdown Output Voltage Trim Range2 Weight All All All All Fsw Tc 90 15 Module Symbol η 91 89 87 84 81 230 93 91 89 86 83 300 120 110 340 kHz °C % g Min Typical Max Units % 1. Vin=5V, full load and Ta=25° C. 2. See graphs on pages 11-13. Control Specifications Parameter Remote On/Off 3 Module Symbol Vouten Min Typical Max Units V Signal Low (Unit Off) V7PD-15Bxx0 Signal High (Unit On) Signal Low (Unit On) V7PD-15BxxL Signal High (Unit Off) -0.3 2.5 -0.3 2.5 0.8 5.5 0.8 5.5 V V V V 3. With remote on/off pin 11 open, the module is on. Note: On/off pin designed to work with an open collector/drain switch. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Efficiency Data Module 3.3V 98% 96% 94% Module 2.5V 94% 92% Efficiency Efficiency 92% 90% 88% 86% 84% 82% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.5V 5V 5.5V 90% 88% 86% 84% 82% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.5V 5V 5.5V Output Current Output Current Module 1.8V 94% 92% Efficiency 90% 88% 86% 84% 82% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.5V 5V 5.5V Output Current Module 1.5V 94% 92% 90% Efficiency Efficiency 94% 92% 90% Module 1.2V 88% 86% 84% 82% 80% 78% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.5V 5V 5.5V 88% 86% 84% 82% 80% 78% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.5V 5V 5.5V Output Current Output Current ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Ripple and Noise 0.1µF ceramic cap added at the output. POWER PRODUCTS BP02V7PD-15B Ripple and noise at full load and 5Vdc input, 3.3Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 2.5Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.8Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.5Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.2Vdc output and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=3.3V 50% to 100% load transients at 5V input and Ta=25° C Vout=3.3V 100% to 50% load transients at 5V input and Ta=25° C Vout=2.5V 50% to 100% load transients at 5V input and Ta=25° C Vout=2.5V 100% to 50% load transients at 5V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance POWER PRODUCTS BP02V7PD-15B Vout=1.8V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.8V 100% to 50% load transients at 5V input and Ta=25° C Vout=1.5V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.5V 100% to 50% load transients at 5V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 9 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=1.2V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.2V 100% to 50% load transients at 5V input and Ta=25° C Thermal Considerations V7PD-15B Derating Curve 15.0 100LFM 200LFM 300LFM Output Current (A) 12.0 9.0 6.0 Natural Convection 3.0 0 0 10 20 30 40 50 60 70 85 Ambient Temperature, Ta (˚C) Output Current vs. Local Ambient Temperature and Air Velocity ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 10 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Output Voltage Set-Point Adjustment Trim Down Test Circuit Vo Trim Up Test Circuit Vo Trim Trim Gnd Gnd Output Voltage Set-Point Adjustment V7PD-15B33x Trim Resistor Calculation Rtrim down = ( 3.17 Vo adj – 0.767 Vo nom – 3.65) Kohm Vo nom – Vo, adj Rtrim up = ( 0.767 Vo nom Vo, adj – Vo nom – 3.65) Kohm ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 11 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Output Voltage Set-Point Adjustment V7PD-15B25x Trim Resistor Calculation Rtrim down = ( 2.16 Vo adj – 0.689 Vo nom – 2) Kohm Vo nom – Vo, adj Rtrim up = ( 0.689 Vo nom Vo, adj – Vo nom – 2) Kohm V7PD-15B18x Trim Resistor Calculation Rtrim down = ( 1.51 Vo adj – 0.668 Vo nom – 1.78) Kohm Vo nom – Vo, adj Rtrim up = ( 0.668 Vo nom Vo, adj – Vo nom – 1.78) Kohm ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 12 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Output Voltage Set-Point Adjustment V7PD-15B15x Trim Resistor Calculation Rtrim down = ( 2.06 Vo adj – 1.092 Vo nom – 1.78) Kohm Vo nom – Vo, adj Rtrim up = ( 1.092 Vo nom Vo, adj – Vo nom – 1.78) Kohm V7PD-15B12x Trim Resistor Calculation Rtrim down = ( 1.22 Vo adj – 0.808 Vo nom – 0.825) Kohm Vo nom – Vo, adj Rtrim up = ( 0.808 Vo nom Vo, adj – Vo nom – 0.825) Kohm ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 13 POWER PRODUCTS BP02V7PD-15B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.2V – 3.3V Output / 15A Mechanical V7PD-15B 0.55 [13.97] 0.05 [1.27] 3.00 [76.20] 0.39 [9.91] max 0.063 [1.60] 0.025 [0.64] 0.10 [2.54] 0.65 [16.51] 1.4 [35.56] 0.15 [3.81] 0.10 [2.54] 0.09 [2.30] max 1 234 5 6 7 8 91011 Pin 1 2 3 Function +Vo +Vo Remote Sense +Vo Ground Ground +Vin +Vin Not Used Trim Remote On/Off Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 4 5 6 7 8 9 10 11 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 01.03 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 14