VRAH-01FX2N

NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs xRAH-01FxxN Series • • • • • Non-Isolated Fixed Frequency High Efficiency High Power Density RoHS Compliant • • • • Low Cost Rev.A Excellent Thermal Performance OCP/SCP Industrial Temperature Range UL60950-1 Recognized (UL/cUL) Description The Bel xRAH-01FxxN modules are non-isolated; step down dc/dc converters that operate from a 3 V - 5.5 V source. Output voltages are -5.0 V, -5.2 V, and -12 V. They are packaged in a compact, overmolded package rated at 1 A, 1 A, 0.5 A. Optional lead forming provides a vertical mount product for minimal footprint or a surface mount option for a very low profile. The output is closely regulated and the efficiency is typically 88% at 1 A, -5 V output at full load. Part Selection Output Voltage -5.0 V -5.2 V -12 V Input Voltage 3.0 V - 5.5 V 3.0 V - 5.5 V 3.0 V - 5.5 V Max. Output Current 1A 1A 0.5 A Max. Output Power 5W 5.2 W 6W Typical Efficiency 88% 88% 88% Part Number Surface Mount SRAH-01F50N SRAH-01F52N SRAH-01FX2N Part Number Vertical Mount VRAH-01F50N VRAH-01F52N VRAH-01FX2N Notes: 1. Add “0” suffix at the end of the model number to indicate “Tube Packaging”, and “R” for “Reel Packaging”, and “G” for “Tray Packaging”. 2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers. Absolute Maximum Ratings Parameter Input Voltage (continuous) Ambient Temperature Storage Temperature Min -0.3 V -40 °C -40 °C Typ Max 7V 85 °C 125 °C Notes Input Specifications Parameter Input Voltage Input Current (full load) VO= -5.0 V, -5.2 V VO= -12 V Input Current (no load) VO= -5.0 V, -5.2 V VO= -12 V Input Reflected Ripple Current (pk-pk) Input Reflected Ripple Current (rms) I t Inrush Current Transient Turn-on Voltage Threshold Turn-off Voltage Threshold VO= -5.0 V, -5.2 V VO= -12 V 2 Min 3V 0.4 V 1.0 V Typ 80 mA 20 mA 2.63 V - Max 5.5 V 2.1 A 2.5 A 150 mA 200 mA 160 mA 50 mA 0.01 A s 2.0 V 2.3 V 2 Notes For -5 V & -5.2 V output, use a 680uF/6.3 V Os-con capacitor; For -12 V output, use 1000 uF electrolytic capacitor & 22 uF/10 V ceramic capacitor at the input. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs Output Specifications Parameter Output Voltage Set Point VO= -5.0 V VO= -5.2 V VO= -12 V Line Regulation VO= -5.0 V, -5.2 V VO= -12 V Load Regulation VO= -5.0 V, -5.2 V VO= -12 V Regulation Over Temperature (-40 °C to +85 °C) VO= -5.0 V, -5.2 V VO= -12 V Ripple and Noise (rms) VO= -5.0 V Vo= -5.2 V VO= -12 V Ripple and Noise (pk-pk) VO= -5.0 V Vo= -5.2 V VO= -12 V Output Current Range VO= -5.0 V, -5.2 V VO= -12 V Output DC Current Limit Short Circuit Surge Transient Turn on Time Overshoot at Turn on Output Capacitance VO= -5.0 V, -5.2 V VO= -12 V Transient Response 50% ~ 100% Max Load 100% ~ 50% Max Load 50% ~ 100% Max Load 100% ~ 50% Max Load Overshoot Settling Time Overshoot Settling Time Overshoot Settling Time Overshoot Settling Time VO= -12 V Vo= -5.0 V, -5.2 V 80 mV 40 uS 80 mV 40 uS 130 mV 50 uS 130 mV 50 uS Test Conditions: di/dt = 0.1 A/uS; Vin = 5.0 V; Ta = 25°C and with 220 uF/10 V Tantalum capacitor & 0.1 uF ceramic capacitor (Vo= -5 V & -5.2 V) or two 47 uF/25 V tantalum capacitors & 0.1 uF ceramic capacitor (Vo=-12 V). 0A 0A 220 uF 100 uF 90 mV 100 mV 120 mV 200% 10 mS 0% 120 mV 130 mV 240 mV 1A 0.5 A 0.01 A s 30 mS 3% 470 uF 150 uF 2 Min -5.1 V -5.304 V -12.24 V -20 mV -120 mV -60 mV -120 mV Typ -5.0 V -5.2 V -12 V - Max -4.90 V -5.096 V -11.76 V 20 mV 120 mV 60 mV 120 mV Notes Vin=5.0 V, lout=half load; with 220 uF/10 V tantalum capacitor & 0.1 uF ceramic capacitor (Vo= -5 V & -5.2 V) or two 47 uF/25 V tantalum capacitors & 0.1uF ceramic capacitor (Vo= -12 V). -80 mV -240 mV - 25 mV 25 mV 40 mV 80 mV 240 mV 40 mV 50 mV 70 mV Test conditions: BW = 0-20 MHz; with 220 uF/10V tantalum capacitor & 0.1 uF ceramic capacitor (Vo= 5 V & -5.2 V) or two 47 uF/25 V tantalum capacitors & 0.1 uF ceramic capacitor (Vo=12 V). Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs General Specifications Parameter Efficiency Switching Frequency MTBF Dimensions (surface mount) Inches (L × W × H) Millimeters (L × W × H) Dimensions (vertical) Inches (L × W × H) Millimeters (L × W × H) Weight Min 84% 250 kHz Typ 88% 300 kHz 4,883,163 hours 0.78 x 0.7 x 0.32 19.82 x 17.78 x 8.13 0.7 x 0.308 x 0.65 17.78 x 7.82 x 16.51 4.9 g Max 350 kHz Calculated Per Bell Core SR-332 (IO = 80%lomax; Ta = 25 °C) SRAH-01FxxN Notes Vin=5 V; lo=lomax VRAH-01FxxN - - Note: All specifications are typical at 25 °C unless otherwise stated. Thermal Derating Curve xRAH-01F50N Efficiency Data MODULE -5V,-5.2V 95.0% EFFICIENCY 85.0% 75.0% 65.0% 55.0% 0.10 0.25 0.50 0.75 1.00 3.3 5 5.5 MODULE -12V 95.0% 90.0% 85.0% 80.0% 75.0% 70.0% 65.0% 0.050 EFFICIENCY 3.3V 5V 5.5V 0.125 0.250 0.375 0.500 OUTPUT CURRENT OUTPUT CURRENT Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs Ripple and Noise Waveforms 3.3 V input, -5 V output 5 V input, -5 V output Note: Ripple and noise at full load, with a 220 uF/10 V tantalum capacitor and a 0.1uF ceramic capacitor at the output, Ta=25 deg C. 3.3 V input, -12 V output 5 V input, -12 V output Note: Ripple and noise at full load, with a 2*47uF/25 V tantalum capacitor and a 0.1uF ceramic capacitor at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs Transient Response Waveforms 50% to 100% load Transient at Vin=3.3 V, Vo=-5 V 100% to 50% load Transient at Vin=3.3 V, Vo=-5 V 50% to 100% load Transient at Vin=5 V, Vo=-5 V 100% to 50% load Transient at Vin=5 V, Vo=-5 V Note: Transient Response at di/dt=0.1 A/uS, with a 220 uF/10 V tantalum capacitor and a 0.1uF ceramic capacitor at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A Outputs Transient Response Waveforms (continued) 50% to 100% load Transient at Vin=3.3 V, Vo=-12 V 100% to 50% load Transient at Vin=3.3 V, Vo=-12 V 50% to 100% load Transient at Vin=5 V, Vo=-12 V 100% to 50% load Transient at Vin=5 V, Vo=-12 V Note: Transient Response at di/dt=0.1 A/uS, with a 2*47uF/25Vtantalum capacitor and a 0.1uF ceramic capacitor at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0 Vdc - 5.5 Vdc Input, -5 Vdc/1 A, -5.2 Vdc/1 A, -12 Vdc/0.5 A utputs Mechanical Outline SRAH-01FxxN Pin Connections Pin 1 2 3 4 5 6 7 Function N/A Vin Ground Vout N/A N/A N/A Pin Connections VRAH-01FxxN Pin 1 2 3 4 5 Function N/A Vin Ground Vout N/A RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. These parts are not however compatible with the higher temperatures associated with lead free solder processes and must be soldered using a reflow profile with a peak temperature of no more than 240 ºC. ©2007 Bel Fuse Inc. Specifications subject to change without notice.011007 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com