BG13BM

BeRex 5-4000 MHz Cascadeable InGaP HBT Gain Block Device Features  37dBm Output IP3 at 5dBm/tone at 900MHz  12.7dB Gain at 1900MHz  18.8dBm P1dB at 1900MHz  Highly Reliable InGaP/GaAs HBT Technology  Temperature Compensation Circuit patent  SOT-86 Surface Mount Package  50ohm Cascadeable  Lead-free/Green/RoHS compliant Application: PA Driver Amplifier, Cellular, PCS, GSM, UMTS, Wireless Data, Satellite Receivers Electrical Specifications (Ta = 25C, Vs = 5V) Parameters Test Conditions Frequency Range 900 MHz 1900 MHz 2140 MHz 2450 MHz 3500 MHz 900 MHz 1900 MHz 2140 MHz 2450 MHz 3500 MHz 900 MHz 1900 MHz 2140 MHz 2450 MHz 3500 MHz 900 MHz 1900 MHz 2140 MHz 2450 MHz 3500 MHz 900 MHz 1900 MHz 2140 MHz 2450 MHz 3500 MHz Vc = 5.0V BG13BM Min 5 Typ 13.1 12.7 12.4 12.0 9.6 -14.2 -14.1 -14.5 -15.9 -13.5 -11.3 -14.4 -15.3 -14.7 -8.3 37.0 36.5 35.0 35.0 31.0 18.7 18.8 18.9 18.7 18.1 73 5.0 -0.004 85 Max 4000 Unit MHz Gain dB S11 dB S22 dB OIP3 dBm P1dB dBm Ic Vc dG/dT Rth Thermal Resistance mA V dB/C C/W Test conditions unless otherwise noted. 1. Device performance is measured on BeRex evaluation board at 25C, 50 ohm system 2. OIP3 measured with two tones at an output power of 5dBm/tone separated by 1MHz. http: //www.berex.com BeRex Absolute Maximum Ratings Parameters Operating Case temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power BG13BM Rating -40 to +85C -55 to +155C +220C +5.5V 150mA 23dBm Operation of this device above any of these parameters may result in permanent damage. [I-V Characteristics] [Generic SOT89 Evaluation Board] *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Application Circuit: 5-4000 MHz Schematic Diagram C3 C4 C5 +5V BOM C1 C2 100pF 100pF 100pF 1000pF 10uF 15nH Tolerance ± 5% ± 5% ± 5% ± 5% ± 20% ± 5% L1 C3 RFin C1 BG13BM C2 RFout C4 C5 L1 http: //www.berex.com BeRex BG13BM S-parameters (Vc=5V, Ic=73mA, T=25C) Typical Device Data (Vdevice = 5.0V, Icc = 73mA, T = 25 C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] -12.07 -13.93 -14.27 -14.06 -14.20 -16.12 -18.56 -13.51 -17.58 S11 [Ang] -69.82 161.74 62.84 -16.31 -94.61 -176.82 90.35 -10.85 -145.12 S21 [Mag] 13.08 12.57 13.17 13.00 12.67 11.96 11.01 9.68 9.62 S21 [Ang] -104.92 142.58 57.48 -17.52 -90.58 -162.15 128.35 56.08 6.00 S12 [Mag] -33.37 -22.88 -22.23 -22.28 -22.57 -23.16 -24.09 -25.19 -25.88 S12 [Ang] 77.61 -23.98 -95.57 -157.73 142.36 82.88 26.44 -34.08 -69.05 S22 [Mag] -0.95 -7.52 -11.84 -13.04 -14.81 -14.39 -10.86 -8.39 -7.03 S22 [Ang] -170.94 48.58 -59.62 -144.51 136.30 42.24 -33.69 -89.01 -127.02 S-Parameter http: //www.berex.com BeRex BG13BM WCDMA 4FA 2140 -60dBc WCDMA 6FA 2140 -60dBc http: //www.berex.com BeRex BG13BM Device Performance Pin-Pout-Gain 900MHz, 5V/73mA 1900 MHz, 5V/73mA 2140MHz, 5V/73mA 2450 MHz, 5V/73mA 3500MHz, 5V/73mA http: //www.berex.com BeRex BG13BM OIP3 http: //www.berex.com BeRex ACPR BG13BM Gain Flatness http: //www.berex.com BeRex BG13BM Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Ø0.40 1.20 1.20 1.20 1.55 1.80 4.47 1.30 1.80 Note : All dimension are in millimeters Visit http://www.berex.com for PCB layout http: //www.berex.com BeRex BG13BM Lead plating finish 100% Tin Matte finish. (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns) MSL / ESD Rating ESD Rating Value Test Standard MSL Rating Standard Class 1A Passes