BG18D

BeRex 50-4000 MHz Cascadeable InGaP HBT Gain Block Device Features  35dBm Output IP3 at 7dBm/tone at 900MHz  24.1dB Gain at 900MHz  19.5dBm P1dB at 900MHz  Highly Reliable InGaP/GaAs HBT Technology  Temperature Compensation Circuit patent  Over Voltage Protection Circuit patent  SOT-89 Surface Mount Package  50 ohm Cascadeable  Lead-free/Green/RoHS compliant Application: commercial, space, military wireless system Electrical Specifications (Ta = 25C, Vs = 5V) Parameters Test Conditions Frequency Range Gain 500MHz 900MHz 1900MHz 2450MHz 500MHz 900MHz 1900MHz 2450MHz 500MHz 900MHz 1900MHz 2450MHz 500MHz 900MHz 1900MHz 2450MHz 500MHz 900MHz 1900MHz 2450MHz Vc = 5.0V BG18DD Min 50 Typ 24.3 2 4 .1 2 2 .2 2 0 .8 -13.0 -22.0 -21.0 -17.0 -15.0 -23.0 -21.0 -27.0 36.0 35.0 32.0 30.5 19.5 19.5 19.0 17.3 83 5.0 -0.004 50 Max 4000 Unit MHz dB S11 dB S22 dB OIP3 dBm P1dB Ic Vc dG/dT Rth dBm mA V dB/°C C/W Thermal Resistance Test conditions unless otherwise noted. 1. Device performance is measured on BeRex evaluation board at 25C, 50 ohm system. 2. OIP3 measured with two tones at an output power of 7dBm/tone separated by 1MHz. http: //www.berex.com BeRex Absolute Maximum Ratings Parameters Operating Case temperature Storage Temperature Junction Temperature Supply Voltage Max. Device Current Input RF Power BG18DD Rating -40 to +85C -55 to +155C +220C 6 .0 V 160mA 23dBm Operation of this device above any of these parameters may result in permanent damage. [I-V Characteristics] [Generic SOT89 Evaluation Board] BeRex Evaluation Board MMIC Innovator *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Application Circuit: 500-4000 MHz Schematic Diagram DC5V BOM C1 C2 C3 C4 100pF 100 pF 100pF 1000pF 10uF 33nH Tolerance ± 5% ± 5% ± 5% ± 5% ± 20% ± 5% L1 C3 C4 C5 BT05VG2 BG18D RF In C1 C2 RF Out C5 L1 http: //www.berex.com BeRex BG18DD Typical Performance (Vdevice = 5V, Ic = 83mA, Ta = 25°C) Freq MHz 500 900 1900 2140 S21 dB 24.3 24.1 22.2 21.7 S11 dB -13.0 -21.0 -22.0 -20.0 S22 dB -15.0 -22.0 -20.0 -22.0 P1 dBm 19.5 19.5 19.0 18.8 OIP3 dBm 36 35 32 31.5 NF dB 4.2 4.2 4.3 4.4 2450 20.8 -18.0 -26.0 17.3 30.5 4.5 3000 19.0 -15.0 -14.0 15.7 27 4.9 S-parameters (Vc=5V, Ic=83mA, T=25C) Typical Device Data http: //www.berex.com BeRex Device Performance Pin-Pout-Gain BG18DD 30 25 20 40% 35% 30% 25 20 35% 30% PAE [%] , Po, G , Po, G , 15 10 5 0 -5 -20 -15 -10 -5 0 25% 20% 15% 10% Po G 5% PAE 0% 5 15 10 5 0 -20 -15 -10 -5 0 20% 15% 10% Po G 5% PAE 0% 5 Pin [dBm] Pin [dBm] 900MHz, 5V/78mA 1900MHz, 5V/78mA http: //www.berex.com PAE[%] , 25% BeRex OIP3 F1=500MHz, F2=501MHz 50 45 40 35 30 25 20 6 7 8 9 10 11 12 13 14 15 +25C -30C +85C BG18DD F1=900MHz, F2=901MHz 50 45 OIP3 [dBm] OIP3 [dBm] 40 35 30 25 20 6 7 8 9 10 11 12 13 14 15 +25C -30C +85C Po, 2tone [dBm] Po, 2tone [dBm] F1=1900MHz, F2=1901MHz 50 45 F1=2140MHz, F2=2141MHz 46 OIP3 [dBm] OIP3 [dBm] 40 35 30 25 20 6 7 8 9 +25C -30C +85C 41 36 31 26 21 16 +25C -30C +85C 6 7 8 9 10 11 12 13 14 15 10 11 12 13 14 15 Po, 2tone [dBm] Po, 2tone [dBm] F1=2450MHz, F2=2451MHz 45 40 OIP3 Po=7dBm/tone, ∆F=1MHz 45 41 OIP3 [dBm] OIP3 [dBm] 35 30 25 20 15 6 7 8 9 10 11 12 13 14 15 +25C -30C +85C 37 33 29 25 21 500 1000 1500 2000 2500 +25C -30C +85C Po, 2tone [dBm] Freq [MHz] http: //www.berex.com BeRex ACPR BG18DD Gain Flatness http: //www.berex.com BeRex BG18DD Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting 0.40 1.30 0.40 Ø0.40 0.40 0.75 1.20 1.20 1.20 1.20 1.50 1.00 0.65 2.80 2.00 0.50 Note : All dimension are in millimeters Visit http://www.berex.com for PCB layout http: //www.berex.com BeRex BG18DD Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish. (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns) MSL / ESD Rating ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 1C Passes