HM50-101KLF

Electrical / Environmental  Axially Leaded Miniature Power Inductors • Inductance Range • Standard Tolerance • Operating Temperature Range 3.9µH to 18,000µH ±10% -55°C to +105°C RoHaSt li n Comp Outline Dimensions (Inch / mm) 0.984 ± .079 25.0 ± 2.0 0.295 Max. 7.50 Specifications @ 25°C Part Number Inductance Nominal (1) µH ±10% DC Resistance Ω Rated IDC (2) Amps INCR IDC (3) Amps Part Number Inductance Nominal (1) µH ±10% DC Resistance Ω Rated IDC (2) Amps INCR IDC (3) Amps HM50-3R9KLF HM50-4R7KLF HM50-5R6KLF HM50-6R8KLF HM50-8R2KLF HM50-100KLF HM50-120KLF HM50-150KLF HM50-180KLF HM50-220KLF HM50-270KLF HM50-330KLF HM50-390KLF HM50-470KLF HM50-560KLF HM50-680KLF HM50-820KLF HM50-101KLF HM50-121KLF HM50-151KLF HM50-181KLF HM50-221KLF HM50-271KLF Notes: 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 .019 .022 .024 .026 .028 .033 .037 .040 .044 .050 .056 .076 .094 .109 .140 .131 .152 .208 .283 .340 .362 .430 .557 3.60 3.40 3.20 3.10 3.00 2.80 2.60 2.50 2.40 2.23 2.10 1.81 1.63 1.51 1.33 1.31 1.30 1.10 0.94 0.86 0.83 0.76 0.67 7.30 6.30 5.60 5.30 4.50 4.10 3.60 3.30 3.00 2.70 2.50 2.20 2.00 1.80 1.70 1.50 1.40 1.20 1.10 1.00 0.95 0.86 0.77 HM50-331KLF HM50-391KLF HM50-471KLF HM50-561KLF HM50-681KLF HM50-821KLF HM50-102KLF HM50-122KLF HM50-152KLF HM50-182KLF HM50-222KLF HM50-272KLF HM50-332KLF HM50-392KLF HM50-472KLF HM50-562KLF HM50-682KLF HM50-822KLF HM50-103KLF HM50-123KLF HM50-153KLF HM50-183KLF 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 .665 .772 1.15 1.27 1.61 1.96 2.30 2.65 3.45 4.03 4.48 5.40 6.56 8.63 9.66 13.9 16.3 20.8 26.4 29.9 42.5 48.3 0.61 0.57 0.47 0.44 0.40 0.36 0.33 0.30 0.27 0.25 0.23 0.21 0.20 0.17 0.16 0.13 0.12 0.11 0.10 0.09 0.08 0.07 0.70 0.64 0.59 0.54 0.49 0.44 0.40 0.35 0.33 0.29 0.27 0.24 0.22 0.20 0.18 .166 .151 .136 .125 .114 .098 .091 (1) Inductance is measured at 1kHz without DC current. (2) The rated DC current is based on an approximate 20°C temperature rise. (3) The incremental current (INCR I) is the approximate current at which the inductance will be decreased by 5% from its initial (zero DC) value due to saturation. Packaging Ordering Information HM50 Standard: Boxes Capacity = 2700 Units 330 K LF Lead Free Model Series Inductance Code: Inductance Tolerance: First 2 digits are significant. Last digit denotes J = ± 5% the number of trailing zeros. For values below K = ± 10% 10µH, “R” denotes the decimal point. M = ± 20% 22 MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com